Regency TT6224 Instructions

IMPORTANT NOTICE: Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched. Check to be sure that you have all parts and hardware. Remove all wrapping materials, including staples & packing straps before you start to assemble. Do not tighten all screws/bolts until completely assembled. Keep all hardware parts out of reach of children. Any problems or questions call Regency Office Furniture at 1-866-816-9822 62” Lateral Return • ONRTLF6224 • INSTRUCTIONS CARTONS: TT6224, MP2412, PLF3624 Parts : Cam Lock Assembly: To open Cam, point arrow toward Cam Pin hole. To lock Cam, turn clockwise. Figure 1: PED-J PED-I TT-C PED-K MP-F PED-I: Lateral (35.5” x 23.5” x 24.5”) Quantity: 1 PED-J: Foot Bracket (23.5”D) Quantity: 2 PED-K: Top Bracket (23.5”D) Quantity: 2 TT-C: Return Top (61” x 23” x 1”) Quantity: 1 MP-F: Return Modesty (25.5” x 12” x 1”) Quantity: 1 62” Lateral Return Page 1

Hardware : NOTE : PRODUCT IS REVERSIBLE. SOME STEPS INCLUDE BOTH RIGHT AND LEFT ORIENTATIONS. Please examine all parts before assembly. Hardware placement is critical. E: Allen Key Quantity: 1 I: 3/4” Wood Screws (19mm) Quantity: 6 G: Glides Quantity: 4 M: Cam Caps Quantity: 2 K: 1.5” Long Bolts (38mm) Quantity:12 J: 3/4” Short Bolts (19mm) Quantity: 28 H: Washers Quantity: 6 N: Flat Bracket Quantity: 4 O: Fine threaded Cam Pins Quantity: 2 P: Corner Bracket Quantity: 2 Cam Pins Quantity: 2 L: Handles Quantity: 4 F: Set of Keys Quantity: 1 62” Lateral Return • ONRTLF6224 • INSTRUCTIONS CARTONS: TT6224, MP2412, PLF3624 62” Lateral Return Page 2

STEP 2A : Insert 2 Glides(G) into each Foot Bracket(PED-J). STEP 2B : Attach each Foot Bracket(PED-J) to the Lateral(PED-I) by placing 1 Washer(H) between the base and each wood screw hole on the Foot Brackets(Figure 2). Then, insert 6 Long Bolts(K) and 6 Wood Screws(I) to attach to Lateral(PED-I). G PED-J I K K K K K K I I I I I PED-I K I K I K I H H H PED-J Figure 2 G PED-J STEP 1 : Pull out each drawer and find the black tabs at the end of the suspension. Lift one side up and press the other side down simultaneously and pull the drawer out. This will unlock the drawer and release it. Repeat this for all drawers. STEP 3 : Lateral Component is Reversible. Decide on an orientation(Left and Right). According to the orientation that you choose, remove 2 Cam Pin Covers in the location shown below. Then insert a Fine threaded Cam Pin(O) into each of the revealed inserts. O O O O Right Return Left Return 62” Lateral Return • ONRTLF6224 • INSTRUCTIONS CARTONS: TT6224, MP2412, PLF3624 62” Lateral Return Page 3

STEP 4 : Attach Top Brackets(PED-K) to Return Top(TT-C). Use 6 Short Bolts(J) to attach each bracket. Do not tighten bolts until all are started. PED-K TT-C STEP 5 : According to the orientation that you choose, Attach Lateral to Return Top(TT-C) using 6 Long Bolts(K). According to the orientation that you choose, TT-C K K TT-C K K Cam Pin Location Cam Pin Location Cam Pin Location Cam Pin Location Right Return Left Return STEP 6 : Attach Modesty(MP-F) to the Lateral by inserting and locking cam pins into locks (Figure 1). MP-F 62” Lateral Return • ONRTLF6224 • INSTRUCTIONS CARTONS: TT6224, MP2412, PLF3624 62” Lateral Return Page 4

YOU WILL NEED A SECOND PERSON TO SUPPORT RETURN MODESTY AND RETURN TOP FOR THIS STEP. STEP 7 : Attach Return Modesty(MP-F) to Desk Leg with 2 Flat Brackets(N) using 4 Short Bolts(J) per bracket. Then, attach Return Top(TT-C) to Desk Top with 2 Flat Brackets(N) using 4 Short Bolts(J) per bracket. Replace File Drawers and attach Handles(L). TT-C MP-F STEP 8 : For extra support, attach Corner Brackets(P) to the Modesty(MP-F) and Lateral with 6 Wood Screws(I) per Bracket. Finish by concealing Cam Locks with Cam Caps(M). 62” Lateral Return • ONRTLF6224 • INSTRUCTIONS CARTONS: TT6224, MP2412, PLF3624 62” Lateral Return Page 5