Takstar PC-K820 Quick Start Manual

邮箱: [email protected] 网址: www.ingping.com 产品名称: PC-K820旁述式录音麦克风 公司名称: 广东得胜电子有限公司 地址: 广东省惠州市博罗县龙溪镇富康一路2号 电话: +86 752 6383956 传真: +86 752 6383950 邮箱: [email protected] 邮编: 516121 网址: www.takstar.com Designed & Manufactured by: Guangdong Takstar Electronic Co., Ltd. Address: No. 2FuKang YiRd., Longxi Boluo Huizhou, Guangdong International Sales: Tel: +86 752 6383644 Email: [email protected] Website: www.takstar.com 惠州音平电声科技股份有限公司 HUIZHOU INGPING ELECTROSONIC CO., LTD

frequency response, high dynamic range and clear sound details performance Actual product may differ slightly from the description and photo of this user manual. * Product is subject to update and improve without prior notice. *

·华丽的合金外观造型，尽显专业、尊贵、典雅 ·配置手提铝合金箱，方便用户携带和存放 欢迎使用 PC-K820录音麦克风；为了 更好的了解我们的产品，我们建议您在使用前，仔细阅读 本说明书，若存在有疑问，或者您有宝贵的建议，请就近 和得胜代理商联系，或者访问 www.takstar.com 产品特性 使用范围 ·专业录音棚、广播电视台、个人录音、乐器录音等场合 01 旁述式录音麦克风 PC-K820

·等效噪声级：≤11dB A ·声压级：145dB （THD≤1.0% at 1KHz） ·输出阻抗：≤200Ω ·使用电压：12-48V幻像电源 02 频率响应图 频率响应 旁述式录音麦克风 PC-K820 1.本单为保修凭证，用户妥 善保管，如有丢失，恕不 退换。 2.保修期限制购买之日起十 二个月内。 3.除了不可抗力事件损坏外， 由本公司负责免费维修。 4.如属保管不善或使用不当 造成事故的，维修点将酌 情收费。 5.擅自拆卸维修者，不予 保修。 6.以上保修条款仅限于中国 市场适用。

离拾音时的低频提升效应和降低环境噪声。 B. -10dB：麦克风的声压级提升10dB。 扩音器 混响器 功放 幻象电源 XLRF XLRM XLRF

便携袋：一个 铝合金箱：一个 说明书：一本 使用说明 1. 使用时，应先将扬声器或调音台音量控制调小，然后将幻象电源与麦克风连接好，再打开幻 象电源的电源开关，并将音量从小到大慢慢调节至合适，以免喇叭受到冲击，拉开与扬声器 的距离，尽量不要使麦克风和扬声器相对。 2. 麦克风灵敏度高，必须注意不要从高处落下或给予强烈撞击。 3. 麦克风不使用时，应存放在干燥清洁的地方，避免在温度、湿度过高的场所保管或使用，以 免影响灵敏度和音色。 09 04 旁述式录音麦克风 PC-K820 旁述式录音麦克风 PC-K820 有毒有害物质或元素 部件名称 （大体分类） 机体（金属部件） 安装基板/电器部件 缆线类 （PBB） （PBDE) 备注： 环保说明 该标记附加在出售到中华人民共和国的电子信息产品上。环形中的数字表示的是环境保护使用期限的年数。 铅（Pb) 水银（Hg) 镉（Cd） 六价铬（CrVl） 多溴联苯 多溴二苯醚 ：表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006标准规定的限量要求以下。 ：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T11363-2006标准规定的限量要求。 因为在当代技术下还没有可替代的物质。

exert the best performance, please read this manual detailedly before using the microphone. If you have any question or suggestion, please contact your local dealer or visit our website www.takstar.com Features Application ·Professional studio recording, broadcasting, PC recording, instrument recording. Product Content Microphone 1 set Windscreen 1 pc Shock Mount 1 pc Portable Bag 1 pc Aluminum Case 1 pc User Manual 1 pc Operating Instruction 1. Before using, please turn the volume of the speaker or console to the minimum, connect the phantom power with the microphone, then turn on the phantom power and adjust the suitable volume from low to high. To avoid the speaker being shocked, please keep it away from the speaker, and do not point the microphone to the speaker. 2. Microphone is with high sensitivity, do not drop from a height or apply strong shock. 3. Keep and store the microphone in the clean and dry places, and do not use it under the high humidity, temperature environment to avoid impact on the sensitivity and timbre. Side-address Recording Microphone PC-K820 Side-address Recording Microphone PC-K820 ·Precise large gold-plated diaphragm capsule features wide frequency response, high dynamic range and clear sound details performance Extreme low background noise audio processing circuit satisfies the · demand of professional recording High-pass filter switch can effectively reduces the low frequency · ambient noise Sensitivity attenuation function ensures high SPL up to 155dB · Customized windscreen effectively eliminates the "pop" sound and air · flow noise Fashionable alloy outlook design, professional and elegant · Provided with high grade aluminium carrying case for convenient · carrying and storage

·Polar Pattern: Cardioid ·Frequency Response: 30Hz-20KHz ·Sensitivity: -33dB±3dB (0dB=1V/Pa at 1KHz) ·Equivalent Noise Level: ≤11dBA ·Max. Input SPL: 145dB (THD≤1.0% at 1KHz) ·Output Impedance: ≤200Ω ·Operating Voltage: 12-48V Phantom Power Frequency Response Graph Frequency Response Graph Connection and Disconnection of the Microphone Cable 1. Plug the XLR connector into the microphone, rotate the connector to align the buckle key with the groove on the microphone, then push the connector into the microphone until it is fastened. 2. To disconnect the cable and the microphone, hold the XLR connector and press the buckle key simultaneously, then pull out the XLR connector from the microphone. 3. The best pick up distance of the microphone is 30-50CM. Connection with the Phantom Power Usage of Switch Side-address Recording Microphone PC-K820 PC-K820 Speaker Mixer Amplifier Phantom Power XLRF XLRM XLRF Side-address Recording Microphone PC-K820 A. Low-cut: when the switch is on “ ” position, it means no attenuation; when the switch is on position, it attenuates the low frequency and reduces the ambient noise for short distance pick-up. B. Sensitivity attenuation: when the switch is on “0” position, it means no attenuation; when the switch is on “-10dB” position, it attenuates the sensitivity by 10dB to enhance the SPL, generally it is for high SPL wide dynamic pickup application such as bass frequency drum, trumpet and short distance vocal pickup. “ ”