Luminetic HMX Series Installation Manual

accordance with all applicable local codes. Installation, inspection, and maintenance of luminaires should be performed by a qualified electrician. DO NOT make or alter any open holes in the luminaire. Do not modify the luminaire. DO NOT install damaged product. Make sure electrical power is OFF before and during installation and maintenance. Make sure the equipment is properly grounded. Make sure the supply voltage is same as the rated fixture voltage. Only use luminaire in its intended location. Make sure the luminaire is not covered with material that will prevent convection or conduction cooling. It’s suggested to perform visual, electrical, and mechanical inspections on a regular basis. Allow luminaire to cool before handling. Do not touch enclosure or light source. Installation Manual Please read and follow all safety instructions. Save this manual for future reference! WARNING To avoid electric shock: To perform maintenance: HMX S E R I E S Luminaire Parameter Wiring Diagram

mounting bracket by screws. 3 2 Adjust the orientation of the luminaire to achieve the desired lighting position and fasten the screws. Loosen the handle of the luminaire’s bracket. 4 Adjust the angle of the luminaire and then tighten the handle of the luminaire’s bracket. luminetic.com.au VISIT US ONLINE 5 Install the driver module in the suitable location.