Luminetic FLS Series Installation Manual

Working Temperature Working Humidity -40°C~+40°C 15%~90%RH Storing Temperature IP Rating -40°C~+65°C IP66 WARNING Installation and wiring of luminaire must be in accordance with all applicable local codes. Installation, inspection, and maintenance of luminaires should be performed by a qualified electrician. DO NOT make or alter any open holes in the luminaire. DO NOT modify the luminaire. DO NOT install damaged product. Make sure electrical power is OFF before and during installation and maintenance. Make sure the equipment is properly grounded. Make sure the supply voltage is same as the rated fixture voltage. Only use luminaire in its intended location. Make sure the luminaire is not covered with material that will prevent convection or conduction cooling. It’s suggested to perform visual, electrical, and mechanical inspections on a regular basis. Allow luminaire to cool before handling. Do not touch enclosure or light source. To perform maintenance: To avoid electric shock: Wiring Diagram