Teac MC-D800-B Owner's Manual

input (AUX IN) jacks, press the PHONO/AUX button and select “AUX” . Each time you press the FM/AM button, the unit will switch between FM and AM broadcast reception . To listen to an FM station, press the FM/AM button and select “FM” . To listen to an AM station, press the FM/AM button and select “AM” . Each time you press the CD/Bluetooth/USB button, the function will change as shown below . CD Bluetooth USB To listen to a CD, press the CD/Bluetooth/USB but- ton and select “CD” . To listen to a Bluetooth device, pre ...

balance stéréo 1 Appuyez sur la touche SOUND pour sélectionner le paramètre que vous voulez régler. Appuyer sur la touche SOUND fait défiler les para- mètres dans l'ordre suivant . BASS TREBLE BALANCE Affichage ordinaire 2 Dans les trois secondes, utilisez les touches VOLUME (+/–) pour changer le réglage. o Si trois secondes s'écoulent sans aucun réglage, le mode de réglage prend fin . Fonctionnement de base (suite) Paramètres et plages de réglage BASS (basses fréquences) Sert à régler les graves . Plage de réglage : −5 à +5 ...

(FCC requirements) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this ...

Up to 32 CD tracks or MP3/WMA files can be programmed in the desired order . Program tracks/files when playback is stopped . Programming tracks/files 1 Press the CD/Bluetooth/USB button to select “CD” or “USB”. 2 Press the MEMORY button when stopped. Display example Program number The track number (or folder and file numbers) and the MEMORY indicator blink . o To stop programming, press the stop (8) button or wait 20 seconds or more . o During programming if you do nothing for 20 seconds or more, the program will be confirmed . Example of display after ...