LG SN5A Simple Manual

future reference. To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit. MODEL SN5A www.lg.com Copyright © 2021 LG Electronics Inc. All Rights Reserved. 2107_Rev01 MFL71827545 ENGLISH SN5.DUSALLM_SIM_MFL71827545.indd 1 2021-07-13 � �� 1:38:09

1 (Standby) · · · · · · · · · ·Switches the unit ON or OFF. F (Function) · · · · · · · · · · · · · · · · · · · · · · · ·Selects function. p/o (Volume) · · · · · · · · · · · · · · · · · · · · Adjusts volume. Rear Panel DC IN · · · · · · · · · · · · · · · · · · · · · Connect to the AC adapter. OPTICAL IN · · · · · · · · · · · ·Connect to an optical device. HDMI IN · · · · · · · · · ·Connect to device with HDMI OUT. HDMI OUT (TV ARC) · · · · · · · · · · · · · · · Connect to a TV. USB Port · · · · · · · · · · · · · · · · · · · ·Connect to a USB device. Make sure to properly align and connect the optical cable; improper alignment may cause damage to the jack. Subwoofer Connection Place the wireless subwoofer near the sound bar and follow steps below. a Connect the power cord of the sound bar and the wireless subwoofer to the outlet. b Turn on the sound bar. •� The sound bar and wireless subwoofer will be automatically connected. The subwoofer's green LED turns on. Manual Subwoofer Connection If the subwoofer does not make sound, try to connect manually. a Press PAIRING on the rear of the wireless subwoofer. •� The green LED on the rear of the wireless subwoofer blinks quickly. (If the green LED does not blink, press and hold the PAIRING.) b Turn on the sound bar. •� Pairing is completed. The green LED on the rear of the wireless subwoofer turns on. Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m (3.3 ft) to prevent wireless interference. ��1 m (3.3 ft) SN5.DUSALLM_SIM_MFL71827545.indd 2 2021-07-13 � �� 1:38:10

) or HDMI ARC ( ). Optical Connection a Connect the sound bar to the TV using Optical cable. b Set up [External Speaker (Optical)] on your TV setting menu. TV HDMI (ARC) Connection a Connect the sound bar to the TV using HDMI cable. b Set up [External Speaker (HDMI ARC)] on your TV setting menu. TV •� HDMI connection is unavailable if your TV does not support HDMI ARC. •� If this unit is connected by OPTICAL and ARC at the same time, the ARC signal has a higher priority. Additional Device Connection a Connect to the external device like as follow. TV OR (Set-top Box, Player etc.) OR b Set the input source by pressing F repeatedly. Remote control Replacement of Battery C/V: Skip/Search N: Play/Pause - Bluetooth connection lock (BT LOCK): Select the Bluetooth function by pressing F repeatedly. Long press N and press it again to limit Bluetooth connection to only BT and LG TV. SOUND EFFECT: Selects a sound effect mode. - TV remote: Long press SOUND EFFECT and press it again to use TV remote control. FOLDER W/S: Searches a folder. J:�Displays�the�information�of�a�file,�an�input�source� or connected Bluetooth device name. - Auto Power ON/OFF: Long press J and press it again. : Adjusts sound level of each speaker. REPEAT:�Listens�to�your�files�repeatedly�or�randomly. SN5.DUSALLM_SIM_MFL71827545.indd 3 2021-07-13 � �� 1:38:12

AC adapter •� Model : DA-50F25 •� Manufacturer : Asian Power Devices Inc. •� Input : 100 - 240 V ~ 50 - 60 Hz •� Output : 25 V 0 2 A •� Model : MS-Z2000R250- 050D0-P •� Manufacturer : MOSO POWER SUPPLY TECHNOLOGY CO., LTD. •� Input : 100 - 240 V ~ 50/60 Hz •� Output : 25 V 0 2 A Dimensions (W x H x D) Approx. 890.0 mm X 57.0 mm X 85.0 mm With foot (35 inch x 2.2 inch x 3.3 inch) Bus Power Supply (USB) 5 V 0 500 mA Amplifier (Total RMS Output power) 400 W RMS Design�and�specifications�are�subject�to�change� without notice. OPEN SOURCE SOFTWARE NOTICE INFORMATION To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [email protected]. This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information. SN5.DUSALLM_SIM_MFL71827545.indd 4 2021-07-13 � �� 1:38:13

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: y Reorient or relocate the receiving antenna. y Increase the separation between the equipment and the receiver. y Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. y Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.�Any�changes�or�modifications�in�construction� of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna�and�your�body.�Users�must�follow�the�specific� operating instructions for satisfying RF exposure compliance. FCC Radio Frequency Interference Requirements: High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. This device cannot be co-located with any other transmitter. Supplier’s Declaration of Conformity Trade Name LG Responsible Party LG Electronics USA, Inc. Address 111 Sylvan Avenue, North Building Englewood Cliffs, New Jersey 07632 Email [email protected] SN5.DUSALLM_SIM_MFL71827545.indd 5 2021-07-13 � �� 1:38:13