LG DV470 Manual 

ENGLISH As an ENERGY STAR® Partner, LG has determined that this product or product models meet the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark. P/No. : MFL61967020 DV470-P.ANGAFLK.S_7020_ENG 5/11/09 9:12 AM Page 1

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction has been adhered to. CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible. Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN POWER: This unit operates on a mains supply of 200-240V, 50/60Hz. WIRING: This unit is supplied with a BSI 1363 approved 13 amp mains plug, fused at 5 amp. When replacing the fuse always use a 5 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your dealer. If the type of plug supplied is not suitable for the mains sockets in your home, then the plug should be removed and a suitable type fitted. Please refer to the wiring instructions below: WARNING: A mains plug removed from the mains lead of this DVD player must be destroyed. A mains plug with bared wires is hazardous if inserted in a mains socket. Do not connect either wire to the earth pin, marked with the letter E or with the earth symbol or coloured green or green and yellow. If any other plug is fitted, use a 5 amp fuse, either in the plug, or at the distribution board. IMPORTANT: The wires in this mains lead are coloured in accordance with the following codes: - BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in the mains lead of this DVD player may not correspond with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. DV470-P.ANGAFLK.S_7020_ENG 5/11/09 9:12 AM Page 2

function explained in this owner’s manual is not available on that disc. Regional Codes This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as the rear of the unit or “ALL”. • Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your unit’s regional code or the disc cannot play. • If you try to play a DVD with a different regional code from your player, the message “Check Regional Code” appears on the TV screen. Copyrights It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. DVD-VIDEO: Discs such as movies that can be purchased or rented. DVD-R: Video mode and finalized only DVD-RW: VR mode, Video mode and finalized only DVD+R: Video mode only DVD+RW: Video mode only Audio CD: Music CDs or CD-R/CD-RW in music CD format that can be purchased. This unit plays DVD±R/RW and CD-R/RW that contains audio titles, DivX, MP3, WMA and/or JPEG files. Some DVD±RW/DVD±R or CD-RW/CD-R cannot be played on this unit due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. Logo Types of Playable Discs Type Safety Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Adjust the settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-8 Displaying Disc Information . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-10 Playing a DivX movie file . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Listening to Music Disc or files . . . . . . . . . . . . . . . . . . . . . . . . .11 Viewing photo files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Table of Contents Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation. DV470-P.ANGAFLK.S_7020_ENG 5/11/09 9:12 AM Page 3

Audio and Video Connection The unit Audio/Video jacks are color coded (yellow for video, red for right audio and white for left audio). If your TV has only one input for audio (mono), connect it to the left (white) audio jack on the unit. Hooking up the unit - more you can do Component Video Connections Connect the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks on the unit to the corresponding input jacks on your TV using a YPBPR cable. • You will still need to connect the left and right audio cables to the TV, or digital audio cable to your stereo. • If your TV accepts progressive format signals, you must use this connection and set [Progressive Scan] to [On] on the setup menu. (See page 7) Digital Audio Output Connection Connect one of the unit’s DIGITAL AUDIO OUTPUT (COAXIAL) jack to the corresponding jack on your amplifier. • If the audio format of the digital output does not match the capabilities of your amplifier, the amplifier will produce a strong, distorted sound or no sound at all. • To see the audio format of the current disc in the on-screen display, press AUDIO. • This unit does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible amplifier via one of this unit’s digital audio outputs. A B A B Connect the AC power cord into the power outlet. Rear of DVD player DV470-P.ANGAFLK.S_7020_ENG 5/11/09 9:12 AM Page 4 Rear of TV

Remove the battery cover on the rear of Remote Control, and insert battery (size AAA) with + and – matched correctly. Remote Control A-B Repeats a section. REPEAT Repeats a chapter, track, title or all. ZOOM Enlarges video image. Button is not available. TITLE Accesses the disc’s title menu. DVD MENU Accesses or exits the DVD menu. RETURN (O) Returns to previous in menu or exits the menu. CLEAR Removes a track number on the Program List. PROGRAM Enters the program edit mode. Numerical buttons Selects numbered options in a menu. DISPLAY Accesses or exits On-Screen Display. OPEN/CLOSE Opens and closes the disc tray. POWER (1) Switches the unit ON or OFF. SCAN (m / M) Search backward or forward. SKIP (. / >) Go to next or previous chapter/track/file. PAUSE/STEP (X) Pauses playback temporarily/ press repeated- ly for frame-by-frame playback. PLAY (N) Starts playback. STOP (x) Stops playback. vV b B Navigates the menus. ENTER ( ) Confirms menu selection. AUDIO ( ) Selects an audio language or audio channel. SUBTITLE ( ) Selects a subtitle language. ANGLE ( ) Selects a DVD camera angle, if available. SETUP Accesses or exits the setup menu. DV470-P.ANGAFLK.S_7020_ENG 5/11/09 9:12 AM Page 5

b Disc Tray Insert a disc here. c Z (Open / Close) Opens or closes the disc tray. d Display window Shows the current status of the unit. e Remote sensor Point the remote control here. f • N (Play) Starts playback. • x (Stop) Stops playback. • . (Skip) Returns to the beginning of current chapter/track/file or go to the previous chapter/track/file. • > (Skip) Go to next chapter/track/file. a b c d e f DV470-P.ANGAFLK.S_7020_ENG 5/11/09 9:12 AM Page 6

When you turn on for the first time (optional) The menu for a language selection will appear when you turn on the unit for the first time. You must select a language to use the unit. Use vV b B to select a language then press ENTER and the confirm menu will appear. Use b B to select [Enter] then press ENTER. Adjust the language settings Menu Language – Select a language for the Setup menu and on-screen display. Disc Audio/Subtitle/Menu – Select a language for the Disc Audio/Subtitle/ Menu. [Original]: Refers to the original language in which the disc was recorded. [Other]: To select another language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list. (see page 13) If you make a mistake while entering number, press CLEAR to delete numbers then correct it. [Off] (for Disc Subtitle): Turn off Subtitle. Adjust the display settings TV Aspect – Select which screen aspect to use based on the shape of your TV screen. [4:3]: Select when a standard 4:3 TV is connected. [16:9]: Select when a 16:9 wide TV is connected. Display Mode – If you selected 4:3, you’ll need to define how you would like widescreen programs and films to be displayed on your TV screen. [Letterbox]: This displays a widescreen picture with black bands at the top and bottom of the screen. [Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary. Progressive Scan (For Component Video connections) – Selects whether the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks output progressive signal. If your TV accepts progressive format signals, you will enjoy accurate color reproduction and high quality image by selecting [On]. If your TV does not accept progressive format signals, select [Off]. If you set Progressive Scan to [On] in error, you must reset the unit. First, remove the disc in the unit. Next, press and hold STOP for five seconds. The video output will be restored to the standard setting, and a picture will be visible on your TV. Adjust the audio settings Dolby Digital / DTS / MPEG – Selects the type of digital audio signal when using the DIGITAL AUDIO OUTPUT jack. [Bitstream]: Select this when you connect this unit’s DIGITAL AUDIO OUTPUT jack to an amplifier with a built-in Dolby Digital, DTS or MPEG decoder. [PCM] (for Dolby Digital / MPEG): Select this when you connect this unit’s DIGITAL AUDIO OUTPUT jack to an amplifier without a built-in Dolby Digital or MPEG decoder. [Off] (for DTS): Select this when you connect this unit’s DIGITAL AUDIO OUTPUT jack to an amplifier without a built-in DTS decoder. Sample Freq. (Frequency) – Selects the sampling frequency of the audio signal. [48 KHz]: The audio signals are always converted to 48 kHz. [96 KHz]: The audio signals are output in their original format. DRC (Dynamic Range Control) – Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Vocal – Set to [On] only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc mix into normal stereo sound. Adjust the settings 1 Display setup menu: SETUP 2 Select a desired option on the first level: v V 3 Move to second level: B 4 Select a desired option on the second level: v V 5 Move to third level: B 6 Change the setting: v V / ENTER ON REMOTE DV470-P.ANGAFLK.S_7020_ENG 5/11/09 9:12 AM Page 7

You must set the [Area Code] option to use the lock options. Select [Area Code] option then press B. Enter a 4-digit password then press ENTER. Enter it again then press ENTER to verify. If you make a mistake while entering number, press CLEAR then correct it. If you forget your password you can reset it. First, remove the disc in the unit. Display setup menu then input the 6-digit number “210499”. The “P CLr” appear in the display window and the password is deleted. Rating – Select a rating level. The lower the level, the stricter the rating. Select [Unlock] to deactivate the rating. Password – Sets or changes the password for lock settings. [New]: Enter a new 4-digits password using the numerical buttons then press ENTER. Enter the password again to confirm. [Change]: Enter the new password twice after entering the current password. Area Code – Select a code for a geographic area as the playback rating level. This determines which area’s standards are used to rate DVDs controlled by the parental lock. (See page 13) Adjust the others settings B.L.E. (Black Level Expansion) – To select the black level of playback pictures, set your preference and monitor’s ability. DivX(R) VOD – We provide you with the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit www.divx.com/vod. Press ENTER when [Select] icon is highlighted and you can view the registration code of the unit. All the downloaded videos from DivX® VOD can only be played back on this unit. Displaying Disc Information - more you can do You can select an item by pressing vV and change or select the setting by pressing b B or using the numbered buttons (0-9). Current title (or track) number/total number of titles (or tracks) Current chapter number/total number of chapters Elapsed playing time Selected audio language or channel Selected subtitle Selected angle/total number of angles Symbol Used in this Manual All discs and files listed below Audio CDs DVD and finalized DVD±R/RW CD-G discs MP3 files DivX files WMA files WMA DivX MP3 CD-G DVD ACD ALL Displaying Disc Information 1 Press DISPLAY: DISPLAY 2 Select a item: v V 3 Adjust the Display menu settings: b B / ENTER 4 To return the exit: DISPLAY ON REMOTE 8 DV470-P.ANGAFLK.S_7020_ENG 5/11/09 9:12 AM Page 8

Stops the playback The unit records the stopped point depending on the disc. “ Xx ” appears on the screen briefly. Press PLAY ( N) to resume playback (from the scene point). If you press STOP (x ) again or unload the disc (“ x ” appears on the screen), the unit will clear the stopped point. (Xx =Resume Stop, x =Complete Stop) The resume point may be cleared when a button is pressed (for example :POWER, OPEN/CLOSE, etc). Playing a DVD that has a menu Most DVD now have menus which load first before the film begins to play. You can navigate these menus using vV b B or number button to highlight an option. Press ENTER to select. Playing a DVD VR disc This unit will play DVD-RW disc that is recorded using the Video Recording (VR) format. When you insert a DVD VR disc, the menu will appear on the screen. Use vV to select a title then press PLAY ( N). To display DVD-VR menu, press DVD MENU or TITLE. Some DVD-VR disc are made with CPRM data by DVD RECORDER. Player does not support these kinds of discs. Skip to the next/previous chapter/track/file Press SKIP (>) to move to the next chapter/track/file. Press SKIP (.) to return to the beginning of the current chapter/track/file. Press SKIP (.) twice briefly to step back to the previous chapter/track/file. Pause a playback Press PAUSE/STEP (X) to pause playback. Press PLAY ( N) to continue playback. Frame-by-Frame playback Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback. Playing repeatedly Press REPEAT repeatedly to select an item to be repeated. The current title, chapter, track or all will be played back repeatedly. To return to normal play- back, press REPEAT repeatedly to select [Off]. Fast forward or fast reverse Press SCAN (m or M) to play fast forward or fast reverse during playback. You can change the various playback speed by pressing SCAN (m or M) repeatedly. Press PLAY ( N) to continue play at normal speed. - DVD, DivX: mmb P mm P mb P m / M p MB p MM p MMB - ACD, WMA, MP3: mx8 P mx4 P mx2 / Mx2 p Mx4 p Mx8 Repeating a specific portion (A-B) Press A-B at the beginning of the portion you wish to repeat and again at the end of the portion. Your selected portion will be repeated continually. To return to normal playback, press A-B to select [Off]. Selecting a subtitle language During playback, press SUBTITLE ( ) repeatedly to select a desired subtitle language. Watching from a different angle If the angle indicator appears on the screen for a moment, you can select a different camera angle by pressing ANGLE ( ) repeatedly. Hearing a different audio During playback, press AUDIO ( ) repeatedly to switch between the available audio languages, channels or encoding methods. Slow down the playing speed (Forward only) While playback is paused, press SCAN (M) to slow down forward playback. You can change the various playback speed by pressing SCAN (M) repeatedly. Press PLAY ( N) to continue play at normal speed. DivX DVD CD-G DivX DVD DVD DivX DVD ACD DivX DVD MP3 WMA ACD DivX DVD ALL DivX DVD ALL ALL DVD Playing a Disc ON REMOTE 1 Open the disc tray: Z OPEN/CLOSE 2 Insert a Disc: - 3 Close the disc tray: Z OPEN/CLOSE 4 Start playback: N PLAY 5 To stop playback: x STOP DV470-P.ANGAFLK.S_7020_ENG 5/11/09 9:12 AM Page 9

During playback or pause mode, press ZOOM repeatedly to select zoom mode. You can move through the zoomed picture using vVb B buttons. Press CLEAR to exit. (100% p 200% p 300% p 400% p 100%) Viewing the title menu Press TITLE to display the disc's title menu, if available. Viewing the DVD menu Press DVD MENU to display the disc menu, if available. Starting play from selected time Searches for the starting point of entered time code. Press DISPLAY then select clock icon. Enter a time then press ENTER. For example, to find a scene at 1 hour, 10 minutes, and 20 seconds, enter "11020" and press ENTER. If you enter the wrong number, press CLEAR to enter again. Last Scene Memory This unit memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled. Screen Saver The screen saver appears when you leave the unit in Stop mode for about five minutes. If the Screen Saver is displayed for five minutes, the unit automatically turns itself off. System Select You must select the appropriate system mode for your TV system. Remove any disc that might be in the unit, press and hold PAUSE/STEP (X) for more than five seconds to be able to select a system (PAL, NTSC, AUTO). Mixed disc or – DivX, MP3/WMA and JPEG When playing a disc contained with DivX, MP3/WMA and JPEG files together, you can select which menu of files you would like to play by pressing TITLE. Playing a DivX movie file - more you can do Changing the character set to display DivX® subtitle correctly Press and hold SUBTITLE for 3 seconds during playback. The language code will appear. Press b B to select another language code until the subtitle is displayed properly and then press ENTER. DivX file requirement DivX file compatibility with this player is limited as follows: • Available resolution size: 720x576 (W x H) pixel. • The file names of DivX and subtitle are limited to 20 characters. • DivX file extensions: “.avi”, “.mpg”, “.mpeg” • Playable DivX subtitle: SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD Subtitle System (.txt) • Playable Codec format: “DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “MP43”, “3IVX” • Only the playback function is supported with DivX 6.0 in the unit. • Playable Audio format: “Dolby Digital”, “DTS”, “PCM”, “MP3”, “WMA” • Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48 kHz (WMA) • Bit rate: within 8 - 320 kbps (MP3), within 32 - 192 kbps (WMA), less than 4Mbps (DivX file) • CD-R/RW, DVD±R/RW Format: ISO 9660 • Maximum Files/Folders: Less than 600 (total number of files and folders) ACD DVD DivX DVD DVD DVD DivX DVD Playing a DivX movie file 1 Open the disc tray: Z OPEN/CLOSE 2 Insert a disc: - 3 Close the disc tray: Z OPEN/CLOSE 4 Select a movie file from the menu: v V, DVD MENU To go directly to file, enter the file number using the numbered buttons (0-9). 5 Start playback: N PLAY 6 To stop playback: x STOP ON REMOTE DV470-P.ANGAFLK.S_7020_ENG 5/11/09 9:12 AM Page 10

can do Creating your own program You can play the contents of a disc in the order you want by arranging the order of the musics on the disc. To add a music(s) on the program list, press PROGRAM to enter the program edit mode ( mark appears on the menu). Select a desired music on the [List] then press ENTER to add the music to the program list. Select a music from the program list then press ENTER to start programmed playback. To clear a music from the program list, select the music you want to clear then press CLEAR in program edit mode. To clear all music from the program list, select [Clear All] then press ENTER in program edit mode. The program is cleared when the disc is removed or the unit is turned off. Playing a CD-G disc Once you insert an CD-G disc, a menu appears on the screen. Use vV to select a track then press PLAY ( N). To display the CD-G menu during playback, press STOP (x ) twice. You can display the setup menu by pressing SETUP only when CD-G menu appears on the TV screen. Displaying file information (ID3 TAG) While playing a MP3 file containing file information, you can display the information by pressing DISPLAY repeatedly. MP3/WMA music file requirement MP3/WMA compatibility with this unit is limited as follows: • File extensions: “.mp3”, “.wma” • Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA) • Bit rate: within 8 - 320kbps (MP3), within 32 - 192kbps (WMA) • CD-R/RW, DVD±R/RW Format: ISO 9660 • Maximum Files/Folders: Less than 600 (total number of files and folders) E Listening to Music Disc or files ON REMOTE 1 Open the disc tray: Z OPEN/CLOSE 2 Insert a disc: - 3 Close the disc tray: Z OPEN/CLOSE 4 Select a music from the menu: v V, DVD MENU To go directly to track/file, enter the track/file number using the numbered buttons (0-9). 5 Start playback: N PLAY 6 To stop playback: x STOP DV470-P.ANGAFLK.S_7020_ENG 5/11/09 9:12 AM Page 11

Viewing photo files as a slide show Use vV b B to highlight ( ) icon then press ENTER to start slide show. You can change slide show speed using b B when ( ) icon is highlighted. Skip to the next/previous photo Press SKIP (. or >) to view the previous/next photo. Rotate a photo Use vV to rotate the photo in full screen counterclockwise or clockwise while viewing a photo in full screen. Pause a slide show Press PAUSE/STEP (X) to pause a slide show. Press PLAY ( N) to continue the slide show. Listening to music during slide show You can listen to music during slide show, if the disc contain music and photo files together. Use vV b B to highlight ( ) icon then press ENTER to start slide show. Watching a enlarged photo image While viewing a photo in full screen, press ZOOM repeatedly to select zoom mode. You can move through the zoomed photo using vVb B buttons. Press CLEAR to exit. Photo file requirement JPEG file compatibility with this unit is limited as follows: • File extensions: “.jpg” • Photo size: Less than 2M recommended • CD-R/RW, DVD±R/RW Format: ISO 9660 • Maximum Files/Folders: Less than 600 (total number of files and folders) 12 Viewing photo files ON REMOTE 1 Open the disc tray: Z OPEN/CLOSE 2 Insert a disc: - 3 Close the disc tray: Z OPEN/CLOSE 4 Select a photo file on the menu: v V, DVD MENU To go directly to file, enter the file number using the numbered buttons (0-9). 5 Display the selected file in full screen: N PLAY 6 To return to the menu: x STOP DV470-P.ANGAFLK.S_7020_ENG 5/11/09 9:12 AM Page 12

Area Codes Choose a area code from this list. Language Code Afar 6565 Afrikaans 6570 Albanian 8381 Ameharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Aymara 6588 Azerbaijani 6590 Bashkir 6665 Basque 6985 Bengali, Bangla 6678 Bhutani 6890 Bihari 6672 Breton 6682 Bulgarian 6671 Burmese 7789 Byelorussian 6669 Chinese 9072 Language Code Croatian 7282 Czech 6783 Danish 6865 Dutch 7876 English 6978 Esperanto 6979 Estonian 6984 Faroese 7079 Fiji 7074 Finnish 7073 French 7082 Frisian 7089 Galician 7176 Georgian 7565 German 6869 Greek 6976 Greenlandic 7576 Guarani 7178 Gujarati 7185 Language Code Hausa 7265 Hebrew 7387 Hindi 7273 Hungarian 7285 Icelandic 7383 Indonesian 7378 Interlingua 7365 Irish 7165 Italian 7384 Japanese 7465 Kannada 7578 Kashmiri 7583 Kazakh 7575 Kirghiz 7589 Korean 7579 Kurdish 7585 Laothian 7679 Latin 7665 Latvian, Lettish 7686 Language Code Lingala 7678 Lithuanian 7684 Macedonian 7775 Malagasy 7771 Malay 7783 Malayalam 7776 Maori 7773 Marathi 7782 Moldavian 7779 Mongolian 7778 Nauru 7865 Nepali 7869 Norwegian 7879 Oriya 7982 Panjabi 8065 Pashto, Pushto 8083 Persian 7065 Polish 8076 Portuguese 8084 Language Code Quechua 8185 Rhaeto-Romance 8277 Rumanian 8279 Russian 8285 Samoan 8377 Sanskrit 8365 Scots Gaelic 7168 Serbian 8382 Serbo-Croatian 8372 Shona 8378 Sindhi 8368 Singhalese 8373 Slovak 8375 Slovenian 8376 Spanish 6983 Sudanese 8385 Swahili 8387 Swedish 8386 Tagalog 8476 Language Code Tajik 8471 Tamil 8465 Telugu 8469 Thai 8472 Tonga 8479 Turkish 8482 Turkmen 8475 Twi 8487 Ukrainian 8575 Urdu 8582 Uzbek 8590 Vietnamese 8673 Volapük 8679 Welsh 6789 Wolof 8779 Xhosa 8872 Yiddish 7473 Yoruba 8979 Zulu 9085 Area Code Afghanistan AF Argentina AR Australia AU Austria AT Belgium BE Bhutan BT Bolivia BO Brazil BR Cambodia KH Canada CA Chile CL China CN Colombia CO Congo CG Area Code Costa Rica CR Croatia HR Czech Republic CZ Denmark DK Ecuador EC Egypt EG El Salvador SV Ethiopia ET Fiji FJ Finland FI France FR Germany DE Great Britain GB Greece GR Area Code Greenland GL Hong Kong HK Hungary HU India IN Indonesia ID Israel IL Italy IT Jamaica JM Japan JP Kenya KE Kuwait KW Libya LY Luxembourg LU Malaysia MY Area Code Maldives MV Mexico MX Monaco MC Mongolia MN Morocco MA Nepal NP Netherlands NL Netherlands Antilles AN New Zealand NZ Nigeria NG Norway NO Oman OM Pakistan PK Panama PA Area Code Paraguay PY Philippines PH Poland PL Portugal PT Romania RO Russian Federation RU Saudi Arabia SA Senegal SN Singapore SG Slovak Republic SK Slovenia SI South Africa ZA South Korea KR Spain ES Area Code Sri Lanka LK Sweden SE Switzerland CH Taiwan TW Thailand TH Turkey TR Uganda UG Ukraine UA United States US Uruguay UY Uzbekistan UZ Vietnam VN Zimbabwe ZW DV470-P.ANGAFLK.S_7020_ENG 5/11/09 9:12 AM Page 13

No disc is inserted. The TV is not set to receive the signal from the unit. The video cable is not connected securely. The equipment connected with the audio cable is not set to receive the signal from the unit. The AUDIO options are set to the wrong position. An unplayable disc is inserted. The rating level is set. The remote control is not pointed at the remote sensor on the unit. The remote control is too far from the unit. Plug the power cord into the wall outlet securely. Insert a disc. Select the appropriate video input mode on the TV. Connect the video cable securely. Select the correct input mode of the audio amplifier. Set the AUDIO settings to the correct position. Insert a playable disc. (Check the disc type and regional code.) Change the rating level. Point the remote control at the remote sensor of the unit. Operate the remote control closer to the unit. No power. The power is on, but the unit does not work. No picture. No sound. The unit does not start playback. The remote con- trol does not work properly. Designs and specifications are subject to change without prior notice. Cause General Power requirements AC 200-240V, 50/60 Hz Power consumption 8 W Dimensions (Approx.) 430 x 35 x 200 mm (W x H x D) without foot Net Weight (Approx.) 1.6 kg Operating temperature 5 °C to 35 °C Operating humidity 5 % to 90 % Laser Semiconductor laser Signal system PAL/NTSC Outputs Video Output 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 Component Video Output (Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1, (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 Audio Output 2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1 Digital Output (Coaxial) 0.5 V (p-p), 75 Ω, RCA jack x 1 Accessories Video/Audio cable, Remote Control, Battery DV470-P.ANGAFLK.S_7020_ENG 5/11/09 9:12 AM Page 14