Knight Team Table Assembly Manual

ALL ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS AND WARNINGS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY. IMPORTANT NOTES! Prior to installment, use or maintenance of the desk frame, any installer and any user of the desk must study this assembly and operation manual carefully, so as to gain a complete understanding of its content. WARNING ! 1 10 2 3 12 11 13 15 14 6 4 8 5 9 7 COMPONENTS 1 Leg x6 2 Adjustable Foot x6 3 Leg Cable Cover x6 4 Rail Lengths x4 5 Rail Widths x3 6 2 Way Connector x4 7 2 Way Connector Cap x4 8 3 Way Connector x2 9 3 Way Connector Cap x2 10 Rail Spacer Bracket x7 11 Slot Nut x7 12 Table Top x1 SCREWS 13 M8x20mm Dome Head x7 14 M8x12mm Dome Head x14 15 M8x20mm Cap Head x6 16 10Gx20mm Self Tapping x26 Please Note: Table top may have pre-drilled holes on the underside, these holes may not ailgn to your specific frame. If this is the case, the frame will need to be aligned to the top and new holes drilled separately and screws provided used.

securely lock into place using M8x20mm cap head bolts. Step 3 Securely connect legs to rails lengths using the M8x12mm dome head bolts. Step 4 Securely connect legs to rails widths using the M8x20mm dome head bolts. Step 2 Loosely connect the M8x20mm dome head bolt and slot nut through the rail spacer bracket. Slide brackets onto rails, space evenly and fully tighten in place. Rails 800mm or longer require 1 bracket, 1600mm or longer rails require 2 brackets. 800mm 1600mm

holes in the worksurface. Fully tighten all 10Gx20mm self tapping screws through each leg and rail spacer bracket into the worksurface. Completed Step 6 Conceal any power box cables using the magnetic leg cable covers. Optional Loosely connect the M8x20mm dome head bolt and slot nut through the metal rail spacer bracket. Slide brackets onto rails, space evenly and fully tighten in place. Rails 800mm or longer require 1 bracket, 1600mm or longer rails require 2 brackets. Please Note: Table top may have pre-drilled holes on the underside, these holes may not ailgn to your specific frame. If this is the case, the frame will need to be aligned to the top and new holes drilled separately and screws provided used.