Knight Cubit Highrise Workstation Assembly Instructions Manual

File Specifications

Brand: Knight
Category: Indoor Furnishing
Model: Cubit Highrise Workstation (Assembly Instructions Manual), prghOUd6vxfS6
File Info: Adobe Acrobat PDF (DjVu)
File Size: —
Pages: 17 pages

Download PDF

Download Knight Cubit Highrise Workstation Manual (17 pages)

Read Online:

Read the Knight Cubit Highrise Workstation Assembly Instructions Manual online using the built-in PDF viewer. This document explains how to operate the device, adjust settings and perform regular maintenance.

Key Pages of Document

Slide in crank handle assembly. With crank handle fully retracted, push the locking collar hard

against the furthest bearing on the hanger bracket and tighten grub screws. Step 7 Fit hanger bracket screws and tighten. Step 6 Operation Guide Changing crank handle from left to right operation A A ...

Cubit Highrise Workstation Worktops

30mm 30mm Max 125mm Min 27mm 700mm 591mm ...

Cubit Highrise Workstation Worktops

1500mm x 1500mm x 700mm 1500mm 700mm 700mm 1500mm 100mm 100mm A A A A *A: Ensure that the top bars are parallel to the desk top. ...

Slide in crank handle assembly. With crank handle fully retracted, push the locking collar hard

against the furthest bearing on the hanger bracket and tighten grub screws. Step 7 Fit hanger bracket screws and tighten. Step 6 Operation Guide Changing crank handle from left to right operation A A ...

Fit the hex drive assembly into the drive

socket on leg A. Remove hanger bracket screws to release the assembly, and slide the hex drive assembly out of the leg. Slide out crank handle and shaft. Loosen grub screws from locking collar on leg B. Operation Guide Changing crank handle from left to right operation B B B ...

Slide in crank handle assembly. With crank handle fully retracted, push the locking collar hard

against the furthest bearing on the hanger bracket and tighten grub screws. Step 7 Fit hanger bracket screws and tighten. Step 6 Operation Guide Changing crank handle from left to right operation A A ...

Cubit Highrise Workstation

Any top supplied for this unit will be a universal top and will require the installer to correctly position & pre-drill before fixing it to the frame. A x 1 x 1 x 2 x 2 x 2 x 4 x 5 x 2 x 4 x 4 x 1 x 1 B D E F G H I J L M N · To prevent possible scratches or damage, assemble the desk upside down on a soft surface such as a blanket, carpet or packaging. · Attach Leg to the top assembly by using bolts, spring washer, flat washer. Tighten using the allen wrench. Recommended 2-person Step x 2 K C x 1 x 1 C1 ...

Insert long hex end of gear bar E to leg A.

Attached corner leg C to crossbeam F. Short end of gear bar E must be fitted into the drive socket in the corner leg C. Cubit Highrise Workstation E A F A C F C M J L C E ...

Knight Cubit Highrise Workstation user guide recommended for: Agile Electric 2 Column, Winder Single, Eko Credenza, Scroll, Team Table 4 Legs.

⚠️ Download Safety

The Indoor Furnishing Assembly instructions manual (17 pages) is completely safe to download (last scan date: 27/04/2026).

Related PDF Instructions for Knight Cubit Highrise Workstation:

Indoor Furnishing Equipment: Frequently Requested

Have some Questions about Knight Cubit Highrise Workstation Device?

Get valuable and actionable advices from other Knight Cubit Highrise Workstation device users. Describe your problem or question, regarding the using of Cubit Highrise Workstation, in as much detail as possible, and other users will be able to answer you.