Huawei Huawei MateView GT Operation & User’s Manual

as a Computer to Use the Microphone Open the protective cover on the bottom part of the monitor rear to view the ports. You can connect the monitor to a device such as a computer based on the cable type. • You will see a monitor nameplate attached under the ports and information such as S/N on the nameplate. • After the cables are connected, we recommend that you arrange the cables neatly and reinstall the protective cover to prevent dust from entering the ports. • You can adjust the tilting angle and height of the monitor as required. DP or HDMI c ...

operates. Read this information carefully before using your device. Electronic device Do not use your device if its use is prohibited or if it may cause danger or interference with other electronic devices. Interference with medical equipment • Adhere to any rules or regulations set forth by hospitals and health care facilities. • Some wireless devices may affect the performance of hearing aids or pacemakers. For more information, contact your service provider. • Pacemaker manufa ...

The OSD menu varies depending on the monitor model and version. Level-1 Menu Level-2 Menu Description GamingVision Game assist In gaming scenarios, you can configure the following auxiliary settings: Dark field control: The gamma curve of the monitor can be adjusted to enhance the dark hue in images so that dark scenes and objects can be identified easily. Refresh rate: The refresh rate will be displayed after this feature is enabled. Crosshairs: Crosshairs will be displayed on the screen after this feature is enabled. Picture mode You can select an appropriate ...

• The monitor can be connected to a mobile phone or laptop through the USB-C to USB-C cable that comes with the mobile phone or laptop. This component is only available with XWU-CAA monitors. 8* Headset jack Connects to a headset. This component is only available with XWU-CAA monitors. Appearance and Ports 4 ...

• Locking the joystick: With the monitor powered on and the OSD menu not displayed, press and hold the joystick forwards when facing the monitor until a message is displayed indicating that the joystick is locked. After the joystick is locked, you will not be able to press it to power on or off the monitor or configure the OSD settings. • Unlocking the joystick: With the monitor powered on, press and hold the joystick forwards when facing the monitor until a message is displayed indicating that the joystick is unlocked. Using the Five-Way Joystick to Power on ...

on/off and Configure the OSD Settings The monitor's five-way joystick can be used for powering on/off the monitor and configuring the OSD settings. Powering on/off the monitor • Powering on: Press the joystick upwards. After the brand logo is displayed on the monitor screen, the indicator will blink and the monitor will then turn on. When the monitor is working, the indicator will be off. When the monitor has no signal input, it will enter standby state and the indicator will blink. • Powering off: Press and hold the joystick upwards for more than three ...