Marson MT8230B Operation & User’s Manual

MT8230B 2D Wireless Scanner User’s Manual Version 1.5 DATE: 2021/12/23

2 Table of Content CHAPTER 1 INTRODUCTION ............................................................................................................................................... 6 PRODUCT REQUIREMENTS ............................................................................................................................................................ 6 SPECIFICATIONS ............................................................................................................................................................................ 7 BEEPER INDICATION ....................................................................................................................................................................... 9 LED INDICATION ............................................................................................................................................................................ 9 CHAPTER 2 GENERAL SETTINGS .................................................................................................................................... 10 FACTORY DEFAULT ...................................................................................................................................................................... 10 CHECK VERSION .......................................................................................................................................................................... 10 CHECK BATTERY LIFE .................................................................................................................................................................. 10 BLUETOOTH PROFILE................................................................................................................................................................... 11 Cradle Mode (USB version) ................................................................................................................................................ 11 Cradle Mode (RS232 version) ............................................................................................................................................ 12 BT HID .................................................................................................................................................................................... 13 BT SPP ................................................................................................................................................................................... 13 Disconnect ............................................................................................................................................................................. 14 IOS TOUCH KEYBOARD ............................................................................................................................................................... 14 MEMORY MODE ........................................................................................................................................................................... 15 SLEEP TIMEOUT ........................................................................................................................................................................... 16 BLUETOOTH DEVICE ID ............................................................................................................................................................... 16 GOOD READ INDICATOR .............................................................................................................................................................. 17 Buzzer .................................................................................................................................................................................... 17 Vibrator ................................................................................................................................................................................... 17 DATA FORMAT .............................................................................................................................................................................. 18 Upper / Lower Case ............................................................................................................................................................. 18 Keyboard Layout ................................................................................................................................................................... 18 Data Transmission Speed ................................................................................................................................................... 21 Encoding Format .................................................................................................................................................................. 21 Terminator.............................................................................................................................................................................. 22 GS Replacement .................................................................................................................................................................. 23 Preamble / Postamble .......................................................................................................................................................... 24 CHAPTER 3 READING MODE ............................................................................................................................................ 25 TRIGGER MODE ........................................................................................................................................................................... 25 TOGGLE MODE ............................................................................................................................................................................. 25 CONTINUOUS MODE .................................................................................................................................................................... 25 Continuous Mode – Scan Interval ...................................................................................................................................... 25 AUTO-SENSING MODE ................................................................................................................................................................. 26 Auto-sensing Mode – Image Stabilization Timeout ......................................................................................................... 26 Auto-sensing Mode – Sensitivity ........................................................................................................................................ 26 LED TIMEOUT .............................................................................................................................................................................. 27

3 IDENTICAL READ INTERVAL .......................................................................................................................................................... 27 ILLUMINATION AND AIMER ............................................................................................................................................................ 28 Illumination ............................................................................................................................................................................. 28 Aimer ...................................................................................................................................................................................... 29 CHAPTER 4 SYMBOLOGIES .............................................................................................................................................. 30 GENERAL SETTINGS .................................................................................................................................................................... 30 INVERSE BARCODE ...................................................................................................................................................................... 30 MIRRORED BARCODE .................................................................................................................................................................. 31 UPC-A ......................................................................................................................................................................................... 31 Enable/Disable UPC-A ......................................................................................................................................................... 31 UPC-A to EAN-13 ................................................................................................................................................................. 31 Check Digit ............................................................................................................................................................................ 31 System Number .................................................................................................................................................................... 32 Supplement............................................................................................................................................................................ 32 Supplement Required .......................................................................................................................................................... 32 UPC-E ......................................................................................................................................................................................... 33 Enable/Disable UPC-E ......................................................................................................................................................... 33 UPC-E to UPC-A................................................................................................................................................................... 33 Enable/Disable UPC-E1 ...................................................................................................................................................... 33 Check Digit ............................................................................................................................................................................ 33 System Number .................................................................................................................................................................... 34 Supplement............................................................................................................................................................................ 34 Supplement Required .......................................................................................................................................................... 34 EAN-8 .......................................................................................................................................................................................... 34 Enable/Disable EAN-8 ......................................................................................................................................................... 34 Check Digit ............................................................................................................................................................................ 35 Supplement............................................................................................................................................................................ 35 Supplement Required .......................................................................................................................................................... 35 EAN-13 ........................................................................................................................................................................................ 36 Enable/Disable EAN-13 ....................................................................................................................................................... 36 Check Digit ............................................................................................................................................................................ 36 Supplement............................................................................................................................................................................ 36 Bookland EAN (ISBN) .......................................................................................................................................................... 36 Supplement Required .......................................................................................................................................................... 37 CODE128 ..................................................................................................................................................................................... 37 GS1-128 (UCC/EAN-128) ........................................................................................................................................................ 37 INTERLEAVED 2/5 ......................................................................................................................................................................... 37 Enable/Disable Interleaved 2/5 ........................................................................................................................................... 37 Min/Max Length .................................................................................................................................................................... 38 Verification ............................................................................................................................................................................. 38 Check Digit ............................................................................................................................................................................ 38 MATRIX 2/5 .................................................................................................................................................................................. 38

4 Enable/Disable Matrix 2/5 ................................................................................................................................................... 38 Length ..................................................................................................................................................................................... 39 Verification ............................................................................................................................................................................. 39 Check Digit ............................................................................................................................................................................ 39 INDUSTRIAL 2/5 ............................................................................................................................................................................ 39 Enable/Disable Industrial 2/5 .............................................................................................................................................. 39 Length ..................................................................................................................................................................................... 40 STANDARD 2/5 ............................................................................................................................................................................. 40 Enable/Disable Standard 2/5 .............................................................................................................................................. 40 Length ..................................................................................................................................................................................... 40 CODE39 ....................................................................................................................................................................................... 41 Enable/Disable Code39 ....................................................................................................................................................... 41 Send Start & Stop ................................................................................................................................................................. 41 Length ..................................................................................................................................................................................... 41 Verification ............................................................................................................................................................................. 41 Check Digit ............................................................................................................................................................................ 42 FULL ASCII CODE39 ................................................................................................................................................................... 42 Enable/Disable Full ASCII Code39 .................................................................................................................................... 42 CODE32 ....................................................................................................................................................................................... 42 Enable/Disable Code32 ....................................................................................................................................................... 42 Code32 Preamble (‘A’) ......................................................................................................................................................... 42 CODE93 ....................................................................................................................................................................................... 43 Enable/Disable Code93 ....................................................................................................................................................... 43 Length ..................................................................................................................................................................................... 43 CODE11 ....................................................................................................................................................................................... 43 Enable/Disable Code11 ....................................................................................................................................................... 43 Length ..................................................................................................................................................................................... 43 Verification ............................................................................................................................................................................. 44 Check Digit ............................................................................................................................................................................ 44 CODABAR ..................................................................................................................................................................................... 44 Enable/Disable Codabar ...................................................................................................................................................... 44 Length ..................................................................................................................................................................................... 44 Start & Stop Format .............................................................................................................................................................. 45 Send Start & Stop ................................................................................................................................................................. 45 MSI PLESSEY............................................................................................................................................................................... 45 Enable/Disable Plessey ....................................................................................................................................................... 45 Length ..................................................................................................................................................................................... 45 GS1 DATABAR ............................................................................................................................................................................. 46 GS1 COMPOSITE ......................................................................................................................................................................... 46 QR CODE (INCL. MICRO QR CODE) ........................................................................................................................................... 46 DATA MATRIX ............................................................................................................................................................................... 46 PDF417 ....................................................................................................................................................................................... 46

5 AZTEC........................................................................................................................................................................................... 47 MAXICODE ................................................................................................................................................................................... 47 CHINESE SENSIBLE CODE (HAN XIN) .......................................................................................................................................... 47 CHAPTER 5 CONFIGURATION BARCODE ...................................................................................................................... 48 NUMERIC BARCODE ..................................................................................................................................................................... 48 CANCEL ........................................................................................................................................................................................ 49 DISPLAYABLE CHARACTER .......................................................................................................................................................... 50 CONTROL CHARACTER ................................................................................................................................................................ 55 APPENDIX.............................................................................................................................................................................. 59 APPENDIX A – DEFAULT TABLE ................................................................................................................................................... 59 VERSION HISTORY .............................................................................................................................................................. 63

6 Chapter 1 Introduction This user’s manual is dedicated to MT8230B, a 2D wireless handheld scanner that provides freedom of mobility for user to transmit data to the host from up to 10 meters (33 feet) away. The charging cradle that comes with the scanner can also serve as a wireless transponder that instantly enables your host device with wireless communication using USB HID interface without the need of any driver. Supported by a 1620mAh battery, MT8230B helps user operate around the clock with less downtime ensuring mobile productivity during the entire busy shift. Product Requirements Model Version MT8230B SW: LW-3.16A Jul 16 2021 15:18:04 Boot:LW-3.00F LED Indicator Scan Button (Trigger) Exit Window Charging Cradle & Bluetooth Transponder

7 Specifications Optic & Performance Light Source White LED Visible red LED Sensor 640 x 480 Scan Rate 60 Frames/Sec Resolution 4mil / 0.1mm Scan Angle Horizontal 38° Vertical 29° Pitch Angle ±55° Skew Angle ±55° Roll Angle 360° Print Contrast Ratio 30% Width of Field 161mm (13Mil Code39) Memory 20,000 EAN-13 barcode Guaranteed D.O.F (Environment : 800 lux) 5 Mil Code 39 : 35 ~ 65mm 13 Mil UPC/EAN : 45 ~ 215mm 15 Mil QR Code : 25 ~ 200mm 6.67 Mil PDF417 : 25 ~ 105mm 10 Mil Data Matrix : 40 ~ 65mm Physical Characteristics Dimension L166 x W71 x H84 mm (Scanner) D82 x H84mm (Cradle) Weight 148g (Scanner) 238g (Cradle) Color White Material ABS Cable Option 1: Micro(M) to USB A(M) Cable, 1.5M Option 2: Micro(M) to D-sub9(F) Cable, 2.1M Trigger Scan Button Indicator LED, Buzzer, Vibrator Electrical Operation Voltage 3.7 VDC ± 5% Working Current < 240mA Standby Current < 70mA Charging Voltage/Current 5V, 1.5~2A Battery 3.7V, 1620mAh, Li-Polymer Battery Number of Scan (per full charge) 12,000 scans or 16 hours (1 scan/ 5 secs, Bluetooth connected)

8 Connectivity Radio Bluetooth 4.2 & 3.0 (Class 2) Range 33 ft/ 10m (line of sight) Interface / Profile Scanner: BT HID / BT SPP / Cradle Mode / Memory Mode Cradle: USB HID / RS232 (Factory configured) User Environment Operating Temperature 0 ~ 40˚C Storage Temperature -10 ~ 60˚C Humidity 0% ~ 95%RH (Non-condensing) Drop Durability 1.2M Sealing IP42 Ambient Light 100,000 Lux (Sunlight) 1D Symbologies UPC-A/UPC-E, EAN-8/EAN-13, ISBN, Code 128, GS1-128, Code 39, Code 93, Code 11, Interleaved 2 of 5, Industrial 2 of 5, Matrix 2 of 5, Standard 2 of 5, Codabar, MSI Plessey, GS1 Databar, GS1 Composite 2D Symbologies QR Code, Micro QR Code, Data Matrix, PDF417, Aztec, MaxiCode, Han Xin Regulatory ESD Functional after 4KV contact, 8KV air discharge EMC/RF TBA Safety Approval TBA Environmental WEEE, RoHS 2.0

9 Beeper Indication Beeper Status Single short beep Wireless connection Good read Single long beep Power down Two beeps Wireless disconnection Two beeps (high-low) Succesful configuration Two beeps (low-high) Good read (Memory Mode) Three short beeps Reads a barcode while disconnected Three beeps (low-medium-high) Succesful configuration One short beep & one long beep (low-high) Power up One short beep & one long beep (high-low) Power off Seven beeps (shuts down thereafter) Low power (Battery life < 5%) LED Indication LED Status Flashing blue & green Discoverable in BT HID Flashing blue Discoverable in BT SPP Solid blue Connected 1 green flash Good read / Power up 2 green flashes Disconnected Solid red Charging

10 Chapter 2 General Settings Factory Default Scanning below configuration barcode will reset all parameters to factory default settings (the ones with * asterisk mark). Please note that scanning the left Factory Default (Chapter 2) will reset all General Settings to default, and scanning the right Factory Default (Chapter 3~4) will reset all Reading Mode and Symbologies settings to default. Factory Default Factory Default (Chapter 2) (Chapter 3 ~ 4) Check Version To check firmware version, please scan below configuration barcode. Check Battery Life To check battery life, please scan below configuration barcode. Check Version Check Battery Life

11 Bluetooth Profile Cradle Mode (USB version) Cradle Mode allows barcode data to be transmitted to host device via the built-in Bluetooth transponder in charging cradle with a cable, providing wireless connectivity to the host deivce that does not have built-in Bluetooth adapter. Follow below steps: 1. Plug the charging cradle to host device with an USB cable. 2. Power up the scanner 3. Scan USB HID Cradle Mode (recommended) or USB VCP Cradle Mode 4. The scanner will emit one short beep with LED indicator turning solid blue after successfully connecting to charging cradle. If the charging cradle fails to connect to the scanner, scan Disconnect (see Disconnect section in page 14), unplug the cable from charging cradle and plug it back. The charging cradle will be able to connect to the nearest scanner when the cable is plugged. 5. To swap charging cradle, please follow step 1 ~ 3, and then scan Disconnect (see Disconnect section in page 14), unplug the cable from the charging cradle you want to disconnect, and plug the cable to the charging cradle you want to connect. The charging cradle will be able to connect to the nearest scanner when the cable is plugged. USB HID Cradle Mode* USB VCP Cradle Mode

12 Cradle Mode (RS232 version) Cradle Mode allows barcode data to be transmitted to host device via the built-in Bluetooth transponder in charging cradle with a cable, providing wireless connectivity to the host deivce that does not have built-in Bluetooth adapter. Follow below steps: 1. Plug the charging cradle to host device with an RS232 cable. 2. Power up the scanner 3. Scan RS232 Cradle Mode 4. The scanner will emit one short beep with LED indicator turning solid blue after successfully connecting to charging cradle. If the charging cradle fails to connect to the scanner, scan Disconnect (see Disconnect section in page 14), unplug the cable from charging cradle and plug it back. The charging cradle will be able to connect to the nearest scanner when the cable is plugged. 5. To swap charging cradle, please follow step 1 ~ 3, and then scan Disconnect (see Disconnect section in page 14), unplug the cable from the charging cradle you want to disconnect, and plug the cable to the charging cradle you want to connect. The charging cradle will be able to connect to the nearest scanner when the cable is plugged. RS232 Cradle Mode

13 BT HID BT HID BT SPP BT SPP is compatible with Android and Windows. A serial communication software is required for this profile. Follow below steps: 1. Power up the scanner 2. Scan BT SPP, the scanner will emit two beeps with LED indicator flashing blue 3. Pair with “BarCode Scanner spp” from the discovered device list. If the host is unable to find the scanner in the discovered device list, scan Disconnect (see Disconnect in the next page) 4. Enter serial communication software (TeraTerm, PuTTY, etc…) and open the serial port occupied by the scanner. 5. The scanner will emit one short beep with LED indicator turning solid blue after successfully connecting to charging cradle. BT SPP BT HID is compatible with iOS, Android and Windows and requires applications that accept keyboard data. After scanning BT HID, press and hold the trigger until two beeps & blue/green LED flashing to make the scanner discoverable. Folllow below steps: 1. Power up the scanner 2. Scan BT HID 3. Press and hold the trigger until beeps with LED indicator flashing blue and green. Alternatively you may scan Disconnect (see Disconnect section in the next page) 4. Pair with “BarCode Scanner HID” from the discovered device list. 5. The scanner will emit one short beep with LED indicator turning solid blue after successfully connecting to charging cradle.

14 Disconnect Scanning Disconnect allows the scanner to disconnect from the host, or become discoverable, which helps the host to find the scanner in the discovered device list (in BT SPP, BT HID mode) or prompts the charging cradle to connect to the scanner (in Cradle Mode). iOS Touch Keyboard To toggle iOS touch keyboard, please scan Toggle iOS Touch Keyboard below. Toggle iOS Touch Keyboard Disconnect Alternatively, by enabling iOS Hotkey (enabled by default), you may simply double-click the trigger to toggle iOS touch keyboard. Enable iOS Hotkey* Disable iOS Hotkey

15 Memory Mode Memory Mode enables the scanner to store barcode data (20,000 EAN-13 barcode) and transmit it in batch to the host device when needed. Memory Mode can be used among all the Bluetooth profiles (Cradle Mode, BT HID, BT SPP). Follow below steps: 1. Scan Enter Memory Mode 2. Scan desired barcodes. 3. Make sure the scanner is connected to the host device through Cradle Mode, BT HID or BT SPP. 4. Scan Upload Memory Data to transmit all stored barcode data 5. Scan Erase Memory Data if you want to clear all memory data 6. Scan Exit Memory Mode if you want to resume online operation Enter Memory Mode Exit Memory Mode Upload Memory Data Check Memory Data Counts Erase Memory Data

16 Sleep Timeout Sleep Timeout = 30 seconds Sleep Timeout = 1 minute Sleep Timeout = 2 minutes Sleep Timeout = 5 minutes* Sleep Timeout = 10 minutes Sleep Timeout = 30 minutes Sleep Timeout = Never Sleep Timeout = Immediate (Scanner Always On) Bluetooth Device ID Scan Set Bluetooth Device ID first, and then scan a barcode that contains your desired Bluetooth Device ID. The maximum length of custom Bluetooht Device ID is 16 digits. The complete Bluetooht Device ID is +, for example, if your custom Bluetooht Device ID is ‘Scanner’, in BT HID profile the complete ID will be ScannerHID; in BT SPP profile the complete ID will be ScannerSPP.

17 Set Bluetooth Device ID Check Bluetooth Device ID Good Read Indicator Buzzer Low Volume Medium Volume High Volume* Vibrator Vibrator On* Vibrator Off

18 Data Format Upper / Lower Case All Lower Case All Upper Case Invert Case As Is* Keyboard Layout English (US)* English (UK) German German (iOS keyboard) French French (Belgian)

19 French (Canadian) Spanish Spanish (Mexican) Italian Italian (142) Japanese Universal Portuguese Portuguese (Brazilian) Russian Czech Turkish Q

20 Turkish F Swedish / Finnish Danish Norwegian Croatian Swiss (German) Swiss (French) Dutch Hungarian Polish Argentine Slovak

21 Data Transmission Speed Data Transmission Speed only applies to BT HID interface. Data Transmission Speed = High Data Transmission Speed = Medium* Data Transmission Speed = Low Data Transmission Speed = Ultra Low Encoding Format 1. Big 5 (Notepad, Excel). To output characters (traditional Chinese only) encoded in Big 5 to Notepad or Excel, please scan below 3 configuration barcodes: Input format = Auto* Output format 1 = GBK Output format 2 = GBK* 2. UTF8, GB2312 (Word). To output double-byte characters (traditional Chinese, simplified Chinese, Japanese) encoded in UTF8 or GB2312 to Word, please scan below 3 configuration barcodes:

22 Input format = Auto* Output format 1 = Unicode Output format 2 = UTF8 3. Shift JIS (Word). To output double-byte characters (Japanese only) encoded in Shift JIS to Word, Please scan below 3 configuration barcodes: Input format = Japanese Output format 1 = Unicode Output format 2 = UTF8 Terminator Terminator = CR* Terminator = LF

23 Terminator = Tab Terminator = None Terminator = CR + LF GS Replacement GS Replacement enables the scanner to replace GS <0x1D> in barcode data by a specific character. Set GS Replacement Clear GS Replacement To set GS Replacement, please follow below steps: 1. Scan Set GS Replacement 2. Scan a configuration barcode representing the replacement character from Chapter 5 Configuration Barcode – Displayable Character or Control Character 3. Scan one of the Character Set 0 ~ 4 in Chapter 5 Configuration Barcode – Control Character if the replacement character chosen in step 2 is from Control Character. If the replacement character is from Displayable Character, please skip this step. To cancel GS Replacement, simply scan Clear GS Replacement.

24 Preamble / Postamble Up to 32 bytes of characters can be set as Preamble / Postamble. Set Preamble Set Postamble Exit Setup To set Preamble / Postamble, please follow below steps: 1. Scan Set Preamble or Set Postamble 2. Scan configuration barcode(s) representing the Preamble / Postamble from Chapter 5 Configuration Barcode – Displayable Character or Control Character 3. Scan one of the Character Set 0 ~ 4 in Chapter 5 Configuration Barcode – Control Character if the character(s) chosen in step 2 is from Control Character. If the character(s) chosen in step 2 is from Displayable Character, please skip this step. To cancel Preamble / Postamble, please follow below steps: 1. Scan Set Preamble or Set Postamble 2. Scan Exit Setup

25 Chapter 3 Reading Mode Trigger Mode In trigger mode, MT8230B starts scanning barcode when trigger is pressed, stops scanning barcode after trigger is released. When a barcode is successfully scanned or LED timeout expires, the scanning stops. Trigger Mode* Toggle Mode In toggle mode, MT8230B starts scanning barcode when trigger is pressed, and keeps scanning barcode after trigger is released. When a barcode is successfully scanned or LED timeout expires, the scanning stops. Toggle Mode Continuous Mode In continuous mode, MT8230B keeps scanning barcodes continuously. Continuous Mode Continuous Mode – Scan Interval Scan interval is the period of time between two consecutive scans. The configurable range is from 0 to 9900ms; default is 500ms (unit = 100ms). To configure scan interval, scan Set Scan Interval, scan two numeric barcodes (see Chapter 5). For example, scan ‘0’ and ‘5’ respectively for 500ms.

26 Set Scan Interval Auto-sensing Mode In auto-sensing mode, MT8230B automatically starts scanning barcode when image change is detected within its field of view. When a barcode is successfully scanned or LED timeout expires, the scanning stops and will restarts scanning if any image change is detected. Auto-sensing Mode Auto-sensing Mode – Image Stabilization Timeout The configurable range is from 0 to 9900ms; default is 500ms (unit = 100ms). To configure image stabilization timeout, scan Set Image Stabilization Timeout, scan two numeric barcodes (see Chapter 5). For example, scan ‘0’ and ‘2’ respectively for 200ms. Set Image Stabilization Timeout Auto-sensing Mode – Sensitivity High* Medium

27 Low LED Timeout LED timeout is the maximum scanning duration. When LED timeout expires, the scanning operation stops automatically. The configurable range is from 0.5 to 25.5s (unit = 0.1s); default is 3s. To configure LED timeout, scan Set LED Timeout, scan three numeric barcodes (see Chapter 5). For example, scan ‘0’ ‘0’ ‘5’ respectively for 0.5s; scan ‘1’ ‘0’ ‘5’ respectively for 10.5s. Unlimited 3s 5s 10s 15s 20s Set LED Timeout Identical Read Interval When identical read interval > 0ms, a barcode (or an identical one) can be re-scanned only after the defined amount of interval expires. The configurable range is from 0 to 9900ms (unit = 100ms);

28 default is 500ms. To configure identical read interval, scan Set Identical Read Interval, scan two numeric barcodes (see Chapter 5). For example, scan ‘0’ ‘5’ respectively for 500ms. 0s 1s 3s 5s 7s Unlimited Set Identical Read Interval Illumination and Aimer Illumination Normal* Always Off Always On

30 Chapter 4 Symbologies General Settings Enable All Symbologies Disable All Symbologies Enable All 1D Symbologies Disable All 1D Symbologies Enable All 2D Symbologies Disable All 2D Symbologies Inverse Barcode Enable All 1D Inverse Barcodes Disable All 1D Inverse Barcodes* Enable Inverse Data Matrix Disable Inverse Data Matrix*

31 Enable Inverse QR Code Disable Inverse QR Code* Mirrored Barcode Enable Mirrored Data Matrix Disable Mirrored Data Matrix* Enable Mirrored QR Code Disable Mirrored QR Code* UPC-A Enable/Disable UPC-A Enable UPC-A* Disable UPC-A UPC-A to EAN-13 Disable UPC-A to EAN-13* Enable UPC-A to EAN-13 Check Digit

32 Send Check Digit* Not Send Check Digit System Number Send System Number* Not Send System Number Supplement Disable 2-digit Supplement* Enable 2-digit Supplement Disable 5-digit Supplement* Enable 5-digit Supplement Supplement Required Disable Supplement Required* Enable Supplement Required

33 UPC-E Enable/Disable UPC-E Enable UPC-E* Disable UPC-E UPC-E to UPC-A Disable UPC-E to UPC-A* Enable UPC-E to UPC-A Enable/Disable UPC-E1 Enable UPC-E1* Disable UPC-E1 Check Digit Send Check Digit* Not Send Check Digit

34 System Number Send System Number* Not Send System Number Supplement Disable 2-digit Supplement* Enable 2-digit Supplement Disable 5-digit Supplement* Enable 5-digit Supplement Supplement Required Disable Supplement Required* Enable Supplement Required EAN-8 Enable/Disable EAN-8

35 Enable EAN-8* Disable EAN-8 Check Digit Send Check Digit* Not Send Check Digit Supplement Disable 2-digit Supplement* Enable 2-digit Supplement Disable 5-digit Supplement* Enable 5-digit Supplement Supplement Required Disable Supplement Required* Enable Supplement Required

36 EAN-13 Enable/Disable EAN-13 Enable EAN-13* Disable EAN-13 Check Digit Send Check Digit* Not Send Check Digit Supplement Disable 2-digit Supplement* Enable 2-digit Supplement Disable 5-digit Supplement* Enable 5-digit Supplement Bookland EAN (ISBN)

37 Disable Bookland EAN* Enable Bookland EAN Supplement Required Disable Supplement Required* Enable Supplement Required Code128 Enable Code128* Disable Code128 GS1-128 (UCC/EAN-128) Enable GS1-128* Disable GS1-128 Interleaved 2/5 Enable/Disable Interleaved 2/5

38 Enable Interleaved 2/5* Disable Interleaved 2/5 Min/Max Length To configure specific length, please scan Set Length, and scan four numeric barcodes (see Chapter 5). For example, if you want minimum length of 4 digits and maximum length of 20 digits, scan ‘0’, ‘4’, ‘2’, ‘0’ respectively. Any Length* Set Length Verification Enable Verification Disable Verification* Check Digit Send Check Digit Not Send Check Digit* Matrix 2/5 Enable/Disable Matrix 2/5

39 Enable Matrix 2/5 Disable Matrix 2/5* Length To configure specific length, please scan Set Length, and scan four numeric barcodes (see Chapter 5). For example, if you want minimum length of 4 digits and maximum length of 20 digits, scan ‘0’, ‘4’, ‘2’, ‘0’ respectively. Any Length* Set Length Verification Enable Verification Disable Verification* Check Digit Send Check Digit Not Send Check Digit* Industrial 2/5 Enable/Disable Industrial 2/5

40 Enable Industrial 2/5 Disable Industrial 2/5* Length To configure specific length, please scan Set Length, and scan four numeric barcodes (see Chapter 5). For example, if you want minimum length of 4 digits and maximum length of 20 digits, scan ‘0’, ‘4’, ‘2’, ‘0’ respectively. Any Length* Set Length Standard 2/5 Enable/Disable Standard 2/5 Enable Standard 2/5 Disable Standard 2/5* Length To configure specific length, please scan Set Length, and scan four numeric barcodes (see Chapter 5). For example, if you want minimum length of 4 digits and maximum length of 20 digits, scan ‘0’, ‘4’, ‘2’, ‘0’ respectively. Any Length* Set Length

41 Code39 Enable/Disable Code39 Enable Code39* Disable Code39 Send Start & Stop Send Start & Stop Not Send Start & Stop* Length Any Length* Verification Enable Verification Disable Verification*

42 Check Digit Send Check Digit Not Send Check Digit* Full ASCII Code39 Enable/Disable Full ASCII Code39 Enable Full ASCII Code39 Disable Full ASCII Code39* Code32 Enable/Disable Code32 Disable Code32* Enable Code32 Code32 Preamble (‘A’) Disable* Enable

43 Code93 Enable/Disable Code93 Enable Code93 Disable Code93* Length Any Length* Code11 Enable/Disable Code11 Enable Code11 Disable Code11* Length Any Length*

44 Verification Enable Verification 1-Digit Verification 2-Digit Verification Check Digit Send Check Digit Not Send Check Digit* Codabar Enable/Disable Codabar Enable Codabar Disable Codabar* Length Any Length*

45 Start & Stop Format Start & Stop = ABCD/ABCD* Start & Stop = ABCD/TN*E Send Start & Stop Send Start & Stop* Not Send Start & Stop MSI Plessey Enable/Disable Plessey Enable MSI Plessey Disable MSI Plessey* Length Any Length*

46 GS1 Databar Enable GS1 Databar Disable GS1 Databar* GS1 Composite Enable GS1 Composite Disable GS1 Composite* QR Code (incl. Micro QR Code) Enable QR Code* Disable QR Code Data Matrix Enable Data Matrix* Disable Data Matrix PDF417

47 Enable PDF417* Disable PDF417 Aztec Enable Aztec Disable Aztec* MaxiCode Enable MaxiCode Disable MaxiCode* Chinese Sensible Code (Han Xin) Enable Disable*

48 Chapter 5 Configuration Barcode Numeric Barcode Below configuration barcodes are only applicable for Length configuration. 0 1 2 3 4 5 6 7 8 9

49 Cancel To cancel the wrong data input during configuration process (e.g. ), scan Cancel. Cancel

50 Displayable Character Below configuration barcodes are only applicable for GS Replacement and Preamble / Postamble configuration. Character Configuration barcode Character Configuration barcode Character Configuration barcode - SP Space ! “ # $ % & ` ( ) * + , . / 0

55 Control Character Below configuration barcodes are only applicable for GS Replacement and Preamble / Postamble configuration. Four types of Character Set are available. Each set has different definition for each configuration barcode. Default is Character Set 0. Character Set 0* Character Set 1 Character Set 2 Character Set 3 Character Set 4 Dec ASCII Char Set 0 Char Set 1 Char Set 2 Char Set 3 Char Set 4 Configuration Barcode 1 SOH NULL Home Ctrl+A Alt+001 Enter (Numeric Keypad) 2 STX Ctrl+B End Ctrl+B Alt+002 Cap Lock

56 3 ETX Ctrl+C Up Arrow Ctrl+C Alt+003 Right Arrow 4 EOT NULL Down Arrow Ctrl+D Alt+004 Up Arrow 5 ENQ NULL Left Arrow Ctrl+E Alt+005 NULL 6 ACK NULL Right Arrow Ctrl+F Alt+006 NULL 7 BEL NULL Shift+ Tab Ctrl+G Alt+007 Enter 8 BS Back Space Back Space Back Space Alt+008 Left Arrow 9 HT Tab Tab Tab Alt+009 Tab 10 LF Enter Enter Ctrl+P Alt+010 Down Arrow 11 VT NULL NULL Ctrl+Q Alt+011 Tab 12 FF NULL NULL Ctrl+R Alt+012 delete

57 13 CR Enter Enter Enter Alt+013 Enter 14 S0 F1 Page Up Ctrl+N Alt+014 Insert 15 S1 F2 Page Down Ctrl+O Alt+015 Esc 16 DLE F3 F11 Ctrl+P Alt+016 F11 17 DC1 F4 NULL Ctrl+Q Alt+017 Home 18 DC2 F5 NULL Ctrl+R Alt+018 Print Screen 19 DC3 F6 NULL Ctrl+S Alt+019 Back Space 20 DC4 F7 NULL Ctrl+T Alt+020 Shift tab 21 NAK F8 F12 Ctrl+U Alt+021 F12 22 SYN F9 F1 Ctrl+V Alt+022 F1

58 23 TB F10 F2 Ctrl+W Alt+023 F2 24 CAN F11 F3 Ctrl+X Alt+024 F3 25 EM F12 F4 Ctrl+Y Alt+025 F4 26 SUB NULL F5 Ctrl+Z Alt+026 F5 27 Esc Esc F6 Ctrl+[ Alt+027 F6 28 FS ALT+0 28 F7 Ctrl+\ Alt+028 F7 29 GS ALT+0 29 F8 Ctrl+] Alt+029 F8 30 RS NULL F9 Ctrl+^ Alt+030 F9 31 US NULL F10 Ctrl+_ Alt+031 F10

59 Appendix Appendix A – Default Table Function Default Remark Bluetooth Profile USB HID Cradle Mode iOS Touch Keyboard Enable Memory Mode N/A Sleep Timeout 5 minutes Bluetooth Device ID BarCode Scanner Good Read Indicator Buzzer High Volume Vibrator On Data Format Upper / Lower Case As Is Keyboard Layout English (US) Data Transmission Speed Medium Encoding Format Input Format = Auto Output Format 1 = GBK Output Format 2 = GBK Terminator CR GS Replacement N/A Preamble / Postamble N/A Reading Mode Trigger Mode Trigger Mode Toggle Mode Continuous Mode Auto-sensing Mode Continuous Mode – Scan Interval 500ms Auto-sensing Mode – Image Stabilization Timeout 500ms Auto-sensing Mode – Sensitivity High LED Timeout 3s Identical Read Interval 500ms Illumination and Aimer Illumination Normal Aimer Normal Symbologies All 1D Inverse Barcode Disable Inverse Data Matrix Disable

60 Inverse QR Code Disable Mirrored Data Matrix Disable Mirrored QR Code Disable UPC-A Enable/Disable Enable UPC-A to EAN13 Disable Check Digit Send System Number Send 2-digit Supplement Disable 5-digit Supplement Disable Supplement Required Disable UPC-E Enable/Disable Enable UPC-E to UPC-A Disable Enable/Disable UPC-E1 Enable Check Digit Send System Number Send 2-digit Supplement Disable 5-digit Supplement Disable Supplement Required Disable EAN-8 Enable/Disable Enable Check Digit Send 2-digit Supplement Disable 5-digit Supplement Disable Supplement Required Disable EAN-13 Enable/Disable Enable Check Digit Send 2-digit Supplement Disable 5-digit Supplement Disable Bookland EAN (ISBN) Disable Supplement Required Disable Code128 Enable/Disable Enable GS1-128 (UCC/EAN-128) Enable/Disable Enable Interleaved 2/5 Enable/Disable Enable Length Any Length Verification Disable

61 Check Digit Not Send Matrix 2/5 Enable/Disable Disable Length Any Length Verification Disable Check Digit Not Send Industrial 2/5 Enable/Disable Disable Length Any Length Standard 2/5 Enable/Disable Disable Length Any Length Code39 Enable/Disable Enable Start & Stop Not Send Length Any Length Verification Disable Check Digit Not Send Full ASCII Code39 Enable/Disable Disable Code32 Enable/Disable Disable Code32 Preamble (‘A’) Disable Code93 Enable/Disable Disable Length Any Length Code11 Enable/Disable Disable Length Any Length Verification Enable Check Digit Not Send Codabar Enable/Disable Disable Length Any Length Start & Stop Format ABCD/ABCD Start & Stop Not Send MSI Plessey Enable/Disable Disable Length Any Length GS1 Databar Enable/Disable Disable

62 GS1 Composite Enable/Disable Disable QR Code Enable/Disable Enable Data Matrix Enable/Disable Enable PDF417 Enable/Disable Enable Aztec Enable/Disable Disable MaxiCode Enable/Disable Disable Chinese Sensible Code (Han Xin) Enable/Disable Disable

63 Version History Rev Date Description Issued 1.0 2021.09.27 Initial Release Shaw 1.1 2021.10.21 Added Disconnect Shaw 1.2 2021.11.03 Updated Scan Rate Shaw 1.3 2021.11.17 Added USB VCP & RS232 Cradle Mode Shaw 1.4 2021.12.16 Updated wireless description, Beeper Indication Removed Code ID Shaw 1.5 2021.12.23 Updated Beeper Indication, Encoding Format Added GS Replacement, Preamble / Postamble Shaw