HSM ProfiPack C400 Operating Instructions Manual

made from cardboard. The�warranty�period�for�the�machine�is� 2 years. This guarantee does not cover wear,�damage�caused�by�incorrect�handling,� natural�wear�and�intervention�by�third�par- ties. 1 Use for intended purpose, guarantee � Before�initial�start-up�of�the�ma- chine,�read�the�operating�instruc- tions and keep them in a safe plate for use at a later date. Please observe all of the safety instructions�attached�to�the�Profi- Pack. Risk of injury! Never reach into the slot of the feed opening. Risk of injury during intake! Do not go near the feed opening with�long�hair,�loose�clothing,�ties,� scarves,�necklaces,�bracelets�etc.� Do not process any material that may�have�a�tendency�to�form�loops,� such�as�tapes,�lacing�or�soft�plastic� film. � Keep�the�ProfiPack�away�from� children. Do not operate the ma- chine�without�the�presence�of�an� operator. ISO 7000-1641: Operations instructions 2 Safety instructions � Switch�the�ProfiPack�off�if�it�is� damaged�or�not�working�correctly� and before relocating or clean- ing�it,�and�disconnect�it�from�the� mains. � Service�work�may�only�be�carried� out by HSM Customer Service or by the service technicians of our contractual partners. •� Make�sure�that�the�mains�plug�is�well�ac- cessible. •� Before�you�insert�the�mains�plug,�make� sure that the voltage and frequency of your�power�supply�comply�with�the�infor- mation on the name plate. • Make sure that no liquids get into the ProfiPack. • The machine must not be placed near a radiator or other heat source. • The ventilation slots must be unobstruct- ed,�and�there�must�be�a�distance�of�at� least�5�cm�between�the�shredder�and�the� walls�and�furniture. english Translation of the original operating instructions

4 Operator control panel 5 Limit stop 6� “Padding”�flap 4 Overview 4 3 5 HSM GmbH + Co. KG Austrasse 1-9 88699 Frickingen / Germany 1 2 6 5 Display and control panel 1� Forward�button 2 Stop button 3 Reverse button 4 “Ready for operation” display 5� “Blockage”�display 3 Transportation and installation Connect�the�power�cable�to�the�machine.� The�machine�must�be�connected�to�a�power� source�which�meets�the�specifications�on�the� nameplate.�Make�sure�that�the�power�cable� is unobstructed and that nobody can tread on it. Plug the connecting plug of the ma- chine into a properly installed socket. Use the recessed grips at the sides to transport the shredder. english 1 3 2 4 5

• Move�the�power�switch�at�the�right- hand side to position “I”. • The “Ready for operation” indicator lights up. The machine is ready to operate. Press�the�“Forward�button”.� The cutting unit starts up. Feed in cardboard •� Cardboard�widths�of�up�to�415�mm�can�be� processed. • Wider cardboard is automatically trimmed. •� The�cutting�unit�is�switched�off�using�the� stop button. Switch off Move�the�power�switch�on�the�right-hand�side� to position “0”. Normal operation Flap up Secure�setting�with�star�grip�screws�on�left� (finger-tight). Padding Flap�in�lower�position Secure�setting�with�star�grip�screws�on�left� (finger-tight). english

Electrical�and�electronic�old�de- vices contain a variety of valuable materials,�but�also�hazardous�sub- stances�which�were�required�for� function and safety. Incorrect dis- posal or handling can be danger- ous to your health and the environment. Never dispose of old devices in the house- hold�waste.�Observe�the�current�applicable� regulations and use the collection points for returning and recycling electric and electron- ic devices. Dispose of all the packaging materials also in an environmentally-respon- sible�way. Blockage Press the “Reverse button” to remove mate- rial in the event of problems.  The cutting unit reverses for approx. 3 sec and pushes the cardboard back. Note If a large quantity of cardboard has already been pulled in before the blockage occur- red,�you�can�also�press�the�forward�button.� This�makes�the�cutting�unit�run�forwards�and� shreds the remaining cardboard. During�this�function,�the�“Ready�for�opera- tion”�and�“Blockage”�indicators�flash�alter- nately. For�all�other�malfunctions,�check�whether� the�motor�was�overloaded�before�contacting� our customer service. Let the machine cool down�for�approx.�15�–�20�mins.�before�re- starting. 7 Troubleshooting Adjustable limit stop Lever up: For moving Lever�down:�� Limit�stop�fixed 6 Operation english

Grid dimension 6 x 60 mm Cutting capacity 1 layer Operating speed 8,0�m/min Working�width 415 mm Infeed height 10 mm Power�supply 230�V,�50�Hz���120�V�/�60�Hz���220�V�/�60�Hz Operating mode Continuous operation Motor�power�max. 0,7�kW Ambient�conditions�for�transport,� storage and operation: Temperature relative humidity height above SL -10 °C up to +25 °C max.�90%,�non-condensing max. 2.000 m Noise emission (idle / under load) 66�-�68�dB(A) 68�-�70�dB(A) Size W x D x H (mm) 610 x 395 x 375 Weight 47 kg english

Austraße�1-9 88699 Frickingen / Germany Tel. +49 7554 2100-0 Fax +49 7554 2100 160 [email protected] www.hsm.eu HSM (UK) Ltd. 14�Attwood�Road�/�Zone�1 Burntwood�Business�Park Burntwood�▪�Staffordshire WS7 3GJ United Kingdom Tel. +44 1543 272-480 Fax +44 1543 272-080 [email protected] www.hsm.eu HSM of America LLC 419�Boot�Road Downingtown,�PA�19335 USA Tel. +1 484 237-2308 +1 800 613-2110 Fax +1 484 237-2309 [email protected] [email protected] www.hsm.us