HP Retail Mobile POS Case Quick Start Manual

POS Case Quick Start Guide © Copyright 2011, 2012 Hewlett-Packard Development Company, L.P. Printed in Second Edition: March 2012 676673-002 Before You Begin Before assembling the HP Retail Mobile POS Case, consult the readme documentation included with the MSR and barcode scanner drivers. Drivers may be included on a CD that came with the case or they can be downloaded from www.hp.com. 1. Go to www.hp.com. 2. Click the SUPPORT & DRIVERS link. 3. Click the Drivers & Software link. 4. In the SEARCH box, enter HP Slate 2 Tablet PC and click the SEARCH button. 5. Follow the on-screen instructions. Before assembling the HP Retail Mobile POS Case be sure to power off the computer. *676673-002* Installing the Case 1 2 4 5 3 Removing the Case 1 2 3

Press the button on the underside of the case to scan. Online Technical Support For the online access to technical support information, self- solve tools, online assistance, community forums or IT experts, broad multivendor knowledge base, monitoring and diagnostic tools, go to http://www.hp.com/support. Localized Versions of This Document Localized versions of this document are available at http:// www.hp.com/support for the following languages: • French • Japanese • Korean Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett-Packard Company may void the user's authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods in order to maintain compliance with FCC Rules and Regulations. Declaration of Conformity for Products Marked with the FCC Logo (United States Only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. For questions regarding the product, contact: Hewlett Packard Company P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call 1-800-HP-INVENT (1-800 474-6836) For questions regarding this FCC declaration, contact: Hewlett Packard Company P. O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call (281) 514-3333 To identify this product, refer to the Part, Series, or Model number found on the product. Canadian Notice This Class B digital apparatus complies with Canadian ICES-003. Avis Canadien Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Korean Notice Japanese Notice