Mania HIPOINT Instruction Manual
Text of the manual
12 V charging adapter
•
Micro USB charging cable
•
Sun visor mount
•
Instruction manual
TECHNICAL SPECIFICATIONS
•
Power supply: Built-in rechargeable lithium
battery
•
Charging: Micro USB cable
•
Charging voltage: 5 V ⎓ 500 mA
•
Bluetooth version: 5.0
•
Range: 10 m
•
Material: ABS
•
Size: 5 × 13 cm
COMPONENTS
(1)
Microphone
(2)
Volume -/previous song
(3)
Volume +/next song
(4)
Speaker
(5)
On/off
(6)
Voice mode
(7)
Accept call/reject call/play
(8)
Micro USB charging cable
(9)
Sun visor mount
(10)
12 V charging adapter
CHARGING THE DEVICE
•
Plug the provided micro USB cable into the
charging port on the back of the device.
•
Plug the other end of the micro USB cable
into the provided 12 V adapter to charge the
device in your car.
•
You can connect the micro USB cable to any
other charger to charge the device at your
own responsibility.
•
The device takes about 3 hours to fully
charge.
HOW TO USE?
•
Press and hold the on/off (5) button for 2
seconds to turn on the device. A blue light
starts flashing (7). A voice will tell you that
the device is now on.
•
Press and hold the on/off (5) button for two
seconds to turn off the device. The blue light
stops flashing and the voice will tell you that
the device is powering off.
•
To install the device on your sun visor, slide
the sun visor mount into the notch on the
back side of the device. Attach the mount
onto your car’s sun visor.
O PAIRING THE DEVICE WITH YOUR
PHONE
•
When you use the device for the first time,
you will have to pair it with your phone.
Turn the device on. It automatically starts to
transmit a Bluetooth signal. If it does not
receive a connection within 3 minutes, it will
power off.
•
Turn your phone’s Bluetooth on and find the
device among available devices (BT-YHQ01).
•
Accept all permissions and your phone will
connect to the device.
•
You can now receive/make calls and listen to
music over the built-in speaker.
•
You must have your phone’s Bluetooth
turned on to use the device!
•
Once your phone and the device are paired,
you must forget the device on your phone to
pair it with another.
•
After the initial pairing, anytime you turn on
the device, it will automatically connect to
your phone if you have Bluetooth turned on.
O RECEIVING AND MAKING CALLS
•
Press the green phone button (7) once to
accept an incoming call.
•
Press and hold the button (7) for 2 seconds
to reject an incoming call.
•
Press the button (7) twice quickly to call the
last person in your phone’s call history.
•
While on a call, press the voice mode button
(6) once to change the mode to your phone’s
speaker for a more private call. To change
the mode back to the device’s speaker, press
the voice mode button (6) again. This only
works during a call.
O MUSIC AND MEDIA
•
You can listen to music through the speaker
of the device.
•
Press the green button (7) to pause/play the
music from your phone.
•
To increase the volume of the speaker, press
and hold the volume + button (3).
•
To decrease the volume of the speaker,
press and hold the volume - button (2).
•
To play the next song, press the volume +
button (3) once.
•
To play the previous song, press the
volume - button (2) once.
WARNINGS
•
Do not submerge in water.
•
This device is not a toy. Store out of reach of
children.
•
Use this product only for its intended
purpose. Do not use attachments of any
kind.
•
This appliance has no user serviceable
components. Do not disassemble.
•
Turn off when not in use.
•
When not used for a long period of time,
store in a dry, dark place and keep away
from extreme temperatures (lower than -10
°C or higher than 50 °C).
WARRANTY
The warranty is valid for 24 months. You can claim it
from DFVU d.o.o., Liparjeva 6a, 1234 Mengeš,
Slovenia, for a replacement product or a refund.
Send us your order number and purchase date in the
email, which is available by clicking on our logo in the
bottom right corner. The product has a lifetime of 24
months from the date of collection.
WEEE disposal and recycling symbol.
The WEEE symbol is attached to the
product in compliance with the EU
directive 2012/19/EU on Waste
Electrical and Electronic Equipment
(WEEE). It is intended to deter the
improper disposal of this product and
to promote reuse and recycling.