Guldmann GH2 Installation Manual

11'-6" = 350 cm 15'-7" = 450 cm 23' = 700 cm 4'-1" = 125 cm 8'-3" = 250 cm 11'-6" = 350 cm 17'-3" = 525 cm GH2 HD Max. 250 kg (550 lbs.) GH2 HD Twin Max. 455 kg (1000 lbs.) 5'-9" = 175 cm 13'-1" = 400 cm 16'-5" = 500 cm 24'-7" = 750 cm GH2 Max. 200 kg (440 lbs.) MINI MIDI MAXI JUMBO JUMBO MINI MIDI MAXI MAXI JUMBO MIDI MINI © Guldmann GB-1394/11/08 39 3. InstallatIon Lifting points Max distance between brackets ...

© Guldmann GB-1394/11/08 72 4. electrIcal connectIon Combi-locks CL3 Double electrical Mounting of double Combi-lock Remove side and end covers and the motor plate . The small fixing plate appears, which is pushed into the rail together with the tongues . When the length of the rail and tongues are to be adapted, it is important that the tongues stop max . 0 .5mm/ 1/16” before the rail end . The tongue must be able to move freely and easily in the rail track . The two plastic parts on the tongues must “overlap” as illustrated . Insert the two pins underneath the motor plate in ...

63 4. electrIcal connectIon Installation of the Combi-lock Motor unit is installed as described on page 63 . Installing the safety lock on fixed rail • The motor unit with tongue and the safety lock for the fixed rail are pushed together into the T track in the Mini rail . • The safety lock should be installed so that its edge is flush with the front edge of the rail . • Fasten the safety lock with two M4 x 10 locking screws . • Use the safety lock as a drill gauge and hold it precisely in position while drilling . A screw clamp can also be used to ...

93 6. toolbox Recommended toolbox content: Hammer drill Vacuum cleaner Laser, horizontal and vertical - NO . 12494 Telescopic stand for the laser – 3 .5 metres - NO . 12493 One lazyboy with wheels - NO . 12496 Two lazyboys without wheels - NO . 12501 Laser holder for lazyboy with wheels - NO . 12492 Foot plate for wall mounting with lazyboy - NO . 12495 Masonry drills - 6-8-10-12-14-18-20 One set of metal drills 1-13 mm Drill for wood Ø12 x 500 mm A jointing gun A circular saw for cutting aluminium – tabletop model A compressor An Accu-drill Liner roller tool - N ...

9 General conditions Installation in corrosive surroundings Special guidelines must be observed when installing the rail system around swimming pools, etc . The surfaces of the brackets used, traverse travelling trolleys, etc ., must be painted . Hoists, switch tracks, Combi-locks, etc ., must be supplied with a special surface treatment . All fixing elements, nuts, washers, threaded rods, must be acid-proof . Acid-proof threaded rods and dual-component adhesive must be used for installation in concrete, tiles, etc . Through-going threaded rods or acid ...

94530 94533 94531 94534141 - Ø14 9453406220 - Ø6 - Ø20 x 220 MM 94538 © Guldmann GB-1394/11/08 25 2. InformatIon List of components Installation tools CLEANING BRUSH CLEANING PUMP CHEMICAL FIxING INCLU- DING STATIC MIxER STATIC MIxER FOR CHEMICAL FIxING PRESS GUN FOR CHEMICAL FIxING CONE DRILL CONCRETE DRILL INSTALLATION STARTING KIT ...