IPGARD SA-KMN-4S-P Quick Start Manual

TECHNICAL SPECIFICATIONS SA-KMN-4S-P Advanced 4-Port Secure Single-head KM Switch with Audio and CAC Support Quick Start Guide USB Signal Type USB 1.1 and 1.0 Keyboard and Mouse only. USB 2.0 for CAC connection. USB Connectors (8) USB Type B User Console Interface (2) USB Type A for keyboard/mouse connections; (1) USB Type A for CAC AUDIO Input (4) Connector stereo 3.5 mm female Output (1) Connector stereo 3.5 mm female POWER Power Requirements 12V DC, 3A power adapter with center-pin positive polarity ENVIRONMENT Operating Temp 32° to 104° F (0° to 40° C) Storage Temp -4° to 140° F (-20° to 60° C) Humidity 0-80% RH, non-condensing CERTIFICATIONS Security Accreditation Common Criteria Validated To NIAP, Protection Profile PSS Ver. 4.0 OTHER Emulation Keyboard, mouse, and video User Controls Front-panel buttons WHAT’S IN THE BOX PART NO. QTY DESCRIPTION SA-KMN-4S-P 1 4-Port SH Secure KM with Audio and CAC Support PS12VDC2A 1 12-VDC, 2-A power adapter with center-pin positive polarity. 1 Quick Start Guide A full manual can be downloaded from www.ipgard.com/documentation/ DESIGNED AND MADE IN THE USA NOTICE The information contained in this document is subject to change without notice. iPGARD makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for a particular purpose. iPGARD will not be liable for errors contained herein, or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent from iPGARD, Inc. 20170518 Toll Free: (888)-994-7427 Phone: (702) 800-0005 Fax: (702)-441-5590 WWW.iPGARD.COM SA-KMN-4S-P 1 2 3 4 ST1 ST2 CONSOLE 12VDC2.0A AUDIO K/M AUDIO AUDIO AUDIO AUDIO K/M K/M K/M K/M CAC CAC CAC CAC CAC IN-1 IN-2 IN-3 IN-4

Auto-switch from 1 to 2 Auto-switch from 2 to 3 Auto-switch from 3 to 4 Monitor 4 Monitor 3 Monitor 2 Monitor 1 INITIAL SETUP INSTALLATION SEE THE FULL MANUAL FOR MORE INFO. A full Manual can be downloaded from www. ipgard.com/documentation/ Optional display topology After connecting all devices to the SA-KMN, a default display topology configuration and display mode will be in effect. By default the SA-KMN is configured to Single-Head mode and a topology with 4 screens arranged horizontally starting with port 1 on the lefthand side. If a different display topology configuration and display mode is desired. See the full manual for details on available settings. The installation setup must match one of the SA-KMN’s predefined display topology configurations. This can be selected through keyboard hotkey commands. Please refer to “Display Topology Configuration” in the full manual for the available display topologies. If one or more of the input computers have multiple displays, Multi-Head Display Mode must be selected. Otherwise, select Single-Head mode. SYSTEM REQUIREMENTS 1. iPGARD Secure PSS is compatible with standard personal/portable computers, servers or thin-clients, running operating systems such as Windows or Linux. 2. The peripheral devices that are supported by the KM are listed in the following table: HARDWARE INSTALLATION 1. Ensure that power is turned off or disconnected from the unit and the computers. 2. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective USB ports of the unit. 3. Optionally connect a stereo audio cable (3.5mm to 3.5mm) to connect the audio output of the computers to the AUDIO IN ports of the unit. 4. Connect a USB keyboard and mouse in the two USB console ports. 5. Optionally connect stereo speakers to the AUDIO OUT port of the unit. 6. Optionally connect CAC (COMMON ACCESS CARD, SMART CARD READER) to the CAC port in the user console interface. 7. Power on the KM by connecting a 12VDC power supply to the power connector, and then turn on all the computers. Note: The computer connected to port 1 will always be selected by default after power up. Note: You can connect up to 4 computers to the 4 port KM. Console Port Authorized Devices Keyboard Wired keyboard and keypad without internal USB hub or composite device functions, unless the connected device has at least one endpoint which is a keyboard or mouse HID class, KVM/KM extender; Audio out Analog amplified speakers, Analog headphones, Digital audio appliance. Mouse/Pointing Device Any wired mouse or trackball without internal USB hub or composite device functions, Touch-screen, Multi-touch or digitizer, KVM/KM extender. User Authentication Device Smart-card reader, PIV/CAC reader, Token or Biometric reader AUDIO OUT VIDEO USB IN USB OUT CAC IN CAC OUT AUDIO IN SA-KMN-4S-P SA-KMN-4S-P 1 2 3 4 ST1 ST2