iOttie Easy One Touch 4 Manual 

• Supporto telefono per parabrezza e cruscotto • Armaturenbrett und Windschutzscheibenhalterungt • Montaje de tablero y parabrisas • Guide • Manuale • Handbuch • Manual Manual Easy One Touch 4 Wireless

Foot Foot Knob Release Bars Suction Cup Dashboard Pad Locking Side Arms Micro USB Port Inside: Qi Wireless Charging Coil Lever Telescopic Knob Telescopic Arm Pivot Knob Easy One Touch Trigger Button Cradle Knob Getting Started Critical Information For optimal mounting and charging, please follow the detailed instructions within this manual when using the Easy One Touch Wireless Charging Mount. iOttie is not liable for possible damages due to product misuse. Telescopic Arm extends from 5 inches to 7 inches. Universal design, fits smartphones and cases from 2.3” - 3.” wide. Air vents on back allow air flow to keep mount cool. Compatibility Before using product, make sure your device is Qi Wireless compatible. Compatible devices include iPhone X, iPhone Xs, iPhone XR, Samsung Galaxy Note S9, S9, S9+, and S8. Qi Wireless Charging Use the included iOttie Charger and Micro USB Cable. If you do use a third party charger, use a Qualcomm Quick Charge 2.0 or equivalent adapter to receive a wireless charge (with compatible devices).

INPUT 5V/2A, 9V/2A, 12V/1.5A CHARGING PORT MICRO USB LENGTH 6.0" WIDTH 4.4" HEIGHT 4.3" WEIGHT 6.4oz Charging Indicator Solid Green Light Smartphone charging. Blinking Red Light Smartphone not charging. Foreign object detected or overheat- ing of mount or smartphone. The Qi Receiver Coil is usually located in the center area of the phone. Check with your phone's manufacturer for Qi coil location. Below are some examples for commonly used phones. For optimal wireless charging, please make sure your smartphone and mount’s Qi coils are aligned. iPhone X Easy One Touch Wireless Easy One Touch Wireless Samsung Galaxy S9 Samsung Galaxy S9+ Samsung Galaxy Note9 iPhone XS Max Qi Coil Qi Alignment Guide

the Ball Joint. Choose an installation method: Dashboard/Flat Surface (A) or Windshield/Curved Glass (B). B. Then, tighten the Cradle Knob. 2. Selecting a Location 1. Assembling the Mount 2. Peel off the protective film on the Suction Cup and press mount firmly onto the dashboard pad. 3. Push Locking Lever down to engage suction. STICKY SUCTION CUP 1. Peel off the film on the dashboard pad & stick on the desired installation location. 1. Peel off the protective film on the Suction Cup and press firmly onto the windshield. Choose a location on the windshield and wipe any dust or debris from the surface. 2. Push Locking Lever down to engage suction. Option B Windshield Installation or Curved Glass Installation Connecting Power STICKY SUCTION CUP Option A Dashboard or Flat Surface Installation The Easy One Touch Wireless is powered via a micro-USB cable. There is no on/off switch on the device. Choose an area on a flat surface and wipe any dust or debris from the surface.

The Easy One Touch lock and release mechanism makes it simple to mount & retrieve smartphones in seconds. Mounting Releasing 1. Press the locking side arms in. Press the locking side arms with one hand and retrieve the device. 2. Press your device against the Easy One Touch trigger button. The mount’s arms will automatically close on contact and hold the device during the driving journey. Adjusting the Mount 1. Cradle Knob When mounting in landscape mode, loosen to rotate the Cradle. Tighten to lock in desired position. 3. Telescopic Knob Located on top of Telescopic Arm, loosen to extend the arm, and tighten to secure distance. 2. Foot Knob Located on the lower back of Cradle. Loosen to re-position mount’s foot. The Foot can be adjusted up & down or side-to- side. 4. Pivot Knob Located on the side of the Mount Base, turning allows you to pivot telescopic arm. Tighten to secure position.

During the charging process, the transfer of electricity gives off heat. Your device may become warm, but should not become exceedingly hot. If the device gets wet, please cease charging immediately. Remove all plugs and dry the product completely. Device is only to be operated in a dry, indoor environment. Please be careful of excessive drops, dents, punctures, or deformities on the device. If you are concerned, please unplug the device and contact the manufacturer. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Operating this device in a hot environment or in direct sunlight for a long period of time may cause malfunctions. We recommend keeping the product in cooler temperatures. Please use included components for an optimal experience. To support Qi wireless charge when using a third party car charger or a USB Power Adapter use a minimum output of both “9.0V-1.67A or 5.0V-2.0A” and at least QC 2.0. The product’s signal could possibly interfere with you TPMS (tire pressure monitoring system). If you notice that your TPMS light turns on, please try using your mount in different locations to avoid the signals from interfering with each other. California Proposition 65 this product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. Operational Warnings

Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 2014/53/EU befindet. Die EG-Konformitätserklärung kann hier heruntergeladen werden: https://www. iottie.com/support/doc