GST I-9300 Quick Start Manual

Features � Working mode can be set to normally open, normally closed and normally open cable monitor through programmer. � Electronically addressed. The address can be modified in field. � The built-in microprocessor processes messages intelligently. � Insulation technology for input signal, good anti-interference ability. � Plug-in structure. Description I-9300 Addressable Input Module is designed to receive normally open or normally closed switch signal from fire devices with coincidence functions, and transmits these messages to fire alarm control panel (FACP) with coincidence detection function. When a device of this kind is activated, the module can send the output signal through signal loop to FACP to alarm or activate relative devices. Connection and Cabling Fig. 1 shows terminals on the module. 9 10 15 16 8 7 2 1 Mounting Hole Mounting Hole Mounting Direction G I1 Z1 Z2 GST-LD-8300/I-9300 65mm Fig. 1 Z1,Z2:Connecting with loop of FACP, polarity-insensitive. I1,G:Connecting with volt-free normally open contact (closed to activate and report alarm) of the device, it can be set to normally closed or normally open cable monitor. Recommended Cabling 1.0mm2 or above fire cable for each terminal. Subject to local codes. Installation The module is simply plugged onto the base after corresponding terminals are connected. If the cable conduit is inside the wall, the base is installed onto the Back Box (Fig. 2). If the cable conduit is on the surface of the wall, B-9310 Back Box is available. Note the upward arrow for mounting direction (Fig. 1). Fig. 2 Fig. 3 Application The module is designed to connect with active devices in field such as water flow switch, pressure switch, position switch, signal valve and devices able to transmit back switch signals. Address and working mode can be set through GST programmer, refer to P-9910B Hand Held Programmer Installation and Operation Manual for specific operation. Working mode is defaulted to normally open (4), while it can be modified to normally closed (7) or normally open cable monitor (1). � Fig. 4 shows connecting the module with field device with volt-free normally open contact. Working mode is normally open (4). � Fig. 5 shows connecting the module with field device with volt-free normally closed contact. Working mode is normally closed (7). � Fig. 6 shows connecting the module with field device with volt-free normally open contact requiring cable monitor. Working mode is normally cable monitor (1). Fig. 4 The Intelligent Solution I-9300 Addressable Input Module I-9300 Z1 Z2 I1 G Normally Open Contact Field Device Z1 Z2 Conduit B-9310 Back Box Conduit Module Module Back Box 548h/01

Fig. 5 Fig. 6 Specification Operating Voltage Loop 24V(16V~28V) Average Current ≤1mA Programming Method Electronically addressed Code Range One address is within 1～242. Indicator Red, flashes when polling. Illuminates in action. Ingress Protection Rating IP30 Operating Temperature 0℃～+49℃ Relative Humidity ≤93%, non condensing Material and Color of Enclosure ABS, White (RAL 9016) Dimension (L×W×H) 120mm×80mm×39mm (with base) Weight About 181g (with base) Accessories and Tools Model Name Remark P-9910B Hand Held Programmer Order separately B-9310 Back Box Order separately Limited Warranty GST warrants that the product will be free of charge for repairing or replacing from defects in design, materials and workmanship during the warranty period. This warranty does not cover any product that is found to have been improperly installed or used in any way not in accordance with the instructions supplied with the product. Anybody, including the agents, distributors or employees, is not in the position to amend the contents of this warranty. Please contact your local distributor for products not covered by this warranty. GST China Gulf Security Technology Co., Ltd. No. 80, Changjiang East Road, QETDZ, Qinhuangdao, Hebei, P. R. China 066004 Tel: +86 (0) 335 8502528 Fax: +86 (0) 335 8508942 [email protected] www.gst.com.cn GST UK Global System Technology PLC Lion Court, Staunton Harold Hall, Melbourne Road, Ashby de la Zouch, Leicestershire, England LE65 1RT Tel: +44 1283 225 478 Fax: +44 1283 220 690 [email protected] www.gst.uk.com GST Dubai Global System Technology PLC P.O. Box 17998 Unit ZA04 JEBEL ALI Free Zone, Dubai, UAE Tel: +971 (0) 4 8833050 Fax: +971 (0) 4 8833053 [email protected] www.gst.uk.com This document is subject to change without notice. Please contact GST for more information or questions. I-9300 Z2 Z1 Normally Closed Contact Field Device I1 G Z1 Z2 Z1 Z2 I1 G Normally Open Contact Field Device Z1 Z2 I-9300 4.7kΩResistor