JAGER PRO M.I.N.E. Operation Manual

CONTROL BOX RECEIVER The most efficient way to pair M.I.N.E.™ Camera with control box receiver is to conduct these steps before mounting the camera THIS STEP IS ONLY A FUNCTION OF THE M.I.N.E.™ CAMERA. THE I.C.E.™ CAMERA DOES NOT UTILISE AN INTERNAL TRANSMITTER. The M.I.N.E.™ Camera has an internal transmitter on the circuit board and must be located within 45 meters of the M.I.N.E.™ Gate to operate correctly. Users must manually pair camera transmitter signal to each control box receiver the first time they are linked together. It is not ...

highlighted item. 10. USB Port: Standard USB cable connection interface to transfer information between the camera and a computer. 11. Del Button: Deletes unwanted pictures, numbers, and letters. 12. Playback Button: Allows user to view pictures on SD card. 13. Battery Polarity Symbols: Located on the front of the battery tray. Aids in 12 proper battery polarity and installation. 1. SIM Card Port: Slot for receiving a cellular SIM card from GSM network providers such as AT&T and T-Mobile. 2. SD Card Port: Slot for receiving an SD card. The camera has no internal mem ...

EXTERIOR 1. Ensure the antenna is not loose, bent, broken or cracked. 2. Check the black antenna grommet is in good condition and is not damaged. 3. Check for condensation in the IR LED bank. 4. Wipe excess dirt from camera lens with a soft cloth and use a moist cotton swab with rubbing alcohol to thoroughly clean. 5. Clean inside the PIR cover. 6. Clean inside the ambient light sensor port. 7. Ensure the latch is tightly securing the camera housing. 8. Inspect the outside of the camera body for any cracks which may cause water or moisture to damage electronics. 9. Apply ...

highlighted item. 10. USB Port: Standard USB cable connection interface to transfer information between the camera and a computer. 11. Del Button: Deletes unwanted pictures, numbers, and letters. 12. Playback Button: Allows user to view pictures on SD card. 13. Battery Polarity Symbols: Located on the front of the battery tray. Aids in 12 proper battery polarity and installation. 1. SIM Card Port: Slot for receiving a cellular SIM card from GSM network providers such as AT&T and T-Mobile. 2. SD Card Port: Slot for receiving an SD card. The camera has no internal mem ...

1. DC Port Plug: Waterproof seal to protect internal components when external battery (optional equipment) is not in use. 2. Mounting Port: 1/4 x 20 internal threads for securing camera to a variety of different type of cameras mounts. Only thread external devices two complete rotations into the camera mounting port then tighten using the mount’s adjusting nut. Forcing external threads to the bottom will damage mounting port and camera housing. NB: There is also an additional mounting port on the back of the camera. INSIDE OF CAMERA FEATURES 1. Antenna Port: ...

workmanship for one (1) year from the date of purchase (“Warranty Period”). JAGER PRO, LLC will repair or replace, at its option, the Product if it fails to function properly during the Warranty Period, subject to the conditions and/or limitations stated herein. Such repair or replacement is your sole remedy under this Limited Warranty. Limitations: Limited Warranty service will not be provided unless the Product, returned in the manner set forth below, is accompa ...