CyberData VoIP Intercom 010935B Installation Quick Reference

VoIP Intercom SiP Compliant 010935B Quick Reference 930180E © 2008, CyberData Corporation, ALL RIGHTS RESERVED © 2008, CyberData Corporation, ALL RIGHTS RESERVED 930180E Quick Reference Intercom Connections Contacting CyberData 1 2 3 4 Alternate Power Input: 1 = +5V at 1000 mA 2 = Power Ground Relay Contact: (2A at 30 VDC or 0.4A at 125 VAC for continuous loads) 3 = Normally Open Common 4 = Normally Open Contact 5 = Door Sense Input 6 = Door Sense Ground Reference J3 - Terminal Block - - Wire in, accept wire range from 16-26 AWG 3 4 5 6 V2 Hardware Corporate Headquarters CyberData Corporation 2555 Garden Road Monterey, CA 93940, USA Phone: 831-373-2601 Fax: 831-373-4193 www.CyberData.net Sales: (831) 373-2601 ext. 334 Support: 831-373-2601 ext. 333 Email: [email protected] RMA Dept: (831) 373-2601 ext. 136 Email: [email protected] Warranty CyberData warrants its product against defects in material and workmanship for a period of two years from the date of purchase. Should the product fail within the warranty period, CyberData will repair or replace the product free of charge. This warranty includes all parts and labor. Should the product fail out-of-warranty, a flat rate repair charge of one half the purchase price will be assessed. Repair costs for products that are in warranty, but damaged by improper modifications or abuse, are charged at the out-of-warranty rate. Products returned to CyberData, both in and out-of-warranty, are shipped to CyberData at the customer’s expense. Charges for shipping repaired products to the customer are paid by CyberData. For product service, contact the Returned Materials Authorization (RMA) department. A product will not be accepted for return without an approved RMA number. Send the product, in its original package, to: CyberData Corporation, 2555 Garden Road, Monterey, CA 93940, Attention: RMA “your RMA number” The Voice-over-IP (VoIP) Intercom is a SIP endpoint designed to provide VoIP phone connectivity in a tamper proof and secure package. Typical Intercom System Installation Getting Started ● Download the VoIP Intercom Operations Guide, a PDF file, at: http://www.cyberdata.net/support/voip/intercom.html or go to www.CyberData.net- >Support->Drivers, Utilities, & Manuals-> Product Drivers & Documentation page- >VoIP Intercom. ● Create a plan for the locations of your Intercoms. ● Prior to installation, consult local building and electrical code requirements. ● WARNING: This enclosure is not rated for any AC voltages! Intercom Parts Parameter Factory Default Setting IP Addressing static IP Address 192.168.3.10 Web Access Username admin Web Access Password admin Subnet Mask 255.255.255.0 Default Gateway 192.168.3.1 802.3af Compliant Ethernet Hub VoIP Phone SIP Server VoIP Intercoms (1) Intercom Assembly (2) 8-32 x 1/4" Flat head phillips machine screw (1) 10-24 x 5/16" Pan head phillips machine screw (1) Wall Mounting Kit (2) Outlet box plugs (2) Flush mounting plate

930180E Quick Reference Quick Reference 930180E © 2008, CyberData Corporation, ALL RIGHTS RESERVED Cable Entries and Conduit Restrictions The VoIP Intercom has three possible cable entries. If you are using the center entry, refer to the drawing on the right that shows the entry restrictions. Mounting and Screws OR CONDUIT HOLE PLUG (1/2”) Not to Exceed 0.1" CONDUIT 1/2" Mounting Screw Not Provided Plate (2 x) Flush Mounting Flat Head Phillips Machine Screw (2 x) Intercom Assembly To mount the intercom, use methods compliant with local electrical codes. Intercom Dimensions Mounting Face Plate 2 Gang Box and PCB Assembly Screw (4x) 2.3 [59] 5.0 [127] 5.0 [127] inches [millimeter]