jbc ALE250 Instruction Manual

Includes: C250403 Cartridge Guide set - Ref. GALE10V-A - Ø 1 mm / 0.039 in Manual ......................................................................................................................................................... 1 unit Ref. 0028271 Guide set - Ref. GALE10V-A C250403 Packing List The following items are included: This manual corresponds to the following reference: - ALE250-A

ø 3,8 3 ALE250 Auto Feed Iron works with C250 cartridges. Find the model that best suits your soldering needs in www.jbctools.com Compatible Cartridges Conical Bent Chisel Chisel Bent Bevel USB-B Connector Features and Connections Auto Feed Iron Ref. ALE250-A ALU Control Unit Main Switch Control Screen Solder Reel Stand 40 mm 50 mm 60 mm 80 mm 100 mm 130 mm 130 mm para manuales - color gris 200 mm

Mark Guide tube Ref . 0002401 - Ø 0,9 - 1 mm (0.035 - 0.04 in) Changing cartridge For a safe cartridge change, unplug the tool or turn the station off before following these guidelines: 2. Align the tip of the cartridge with the solder guide tube. Important: It is essential to insert the cartridge till the end for a good connection. Use the mark as reference. Tighten the cartridge screw (1). 3. You must leave a gap of 8 to 10 mm (0.31 - 0.40 in) between the tip and the end of the Guide tube. 4. Loosen the guide screw. Adjust the guide tube and tighten the screw. 8-10 mm (0.31 - 0.40 in) 2 1 4 3

The fume extractor for AL250 is an easy & safe solution to suck the fume generated at the solder joint. Before carrying out maintenance, always allow the equipment to cool. - Before carrying out maintenance, always unplug the stand and the tool. - Check periodically that the metal parts of the tool and the stand are clean to ensure detection of the tool when it is in the stand. Use a damp cloth or alcohol. - Periodically check all cables and tubes connections. - Replace any defective or damaged pieces. Use original JBC spare parts only. Repairs should only be performed by a JBC authorized technical service. Maintenance 40 mm 50 mm 60 mm 80 mm 100 mm 130 mm 130 mm para manuales - color gris 200 mm

In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility. Warranty JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased. Get 1 extra year JBC warranty by registering here: https://www.jbctools.com/productregistration/ within 30 days of purchase. 130 mm para manuales - color gris 0028271-1221 Specifications ALE Auto Feed Iron Ref.: ALE250-A - Total Net Weight: 148 gr / 0.33 lb - Dimensions: 35 x 21 x 182 mm / 1.42 x 0.83 x 7.16 in - Solder Wire Diameter: Ø 1 mm / 0.039 in - Package Dimensions / Weight: 300 x 125 x 65 mm / 257 g (L x W x H) 11.81 x 4.92 x 2.56 in / 0.57 lb Complies with CE standards. ESD safe