Magnetrol Pulsar Foundation fieldbus R96 Operating Manual

with the function block. The revision value will increment each time a static parameter value in the block is changed. TAG_DESC: The user description of the intended applica- tion of the block. STRATEGY: The strategy field can be used to identify grouping of blocks. This data is not checked or processed by the block. ALERT_KEY: The identification number of the plant unit. This information may be used in the host for sorting alarms, etc. MODE_BLK: The actual, target, permitted, and normal modes of the block. • Target: The mode t ...

6.2 Specifications 6.2.1 Functional – transmitter System design Measurement Principle Pulse burst radar 6 GHz input Measured Variable Level, determined by the time-of-flight of radar pulse reflections Span 0.5 to 130 feet (0.2 to 40 meters) output Type FOUNDATION fieldbus™: H1 (ITK Ver. 6.1.2) Range Digital Display 1 mm Resolution Digital 0.1" Diagnostic Indication Meets requirements of NAMUR NE107 user interface Keypad 4-button menu-driven data entry Display Graphic Liquid Crystal Display ...

4.5 Model R96 Configuration Menu — Device Setup Home Screen Main Menu Device Setup Quick Start Identity Basic Config Display Config Advanced Config Factory Config Measurement Type: Level Only SYSTEM UNITS Volume and Level Dielectric Range: 1.7 to 3.0 3.0 to 10 Above 10 Volume Units: Cubic Feet Cubic Inches Gallons Milliliters Liters Vessel Type: Rectangular Horizontal/Flat Horizontal/Elliptical Horizontal/Spherical Spherical Vertical/Flat Vertical/Elliptical Vertical/Spherical Vertical/Conica ...

BKCAL_IN: The analog input value and status for another blocks BKCAL_OUT output. BKCAL_HYS: The amount the output must change away from its output limit before the limit status is turned off, expressed as a percent of the span of the output. BKCAL_OUT: The value and status required by the BKCAL_IN input for another block. BLOCK_ALM: Used for all configuration, hardware, or system problems in the block. BLOCK_ERR: Reflects the error status associated with the hardware or software components asso ...

WRITE_LOCK: When set to LOCKED, will prevent any external change to the static or non-volatile data base in the Function Block Application of the transmitter. Block con- nections and calculation results will proceed normally, but the configuration will be locked. UPDATE_EVT (Update Event): Is an alert generated by a write to the static data in the block. BLOCK_ALM (Block Alarm): Is used for configuration, hardware, connection, or system problems in the block. The cause of any specific alert is ...

Read this Manual Before Installing This manual provides information on the Pulsar ® Model R96 Pulse Burst Radar transmitter with FOUNDATION fieldbus™ Output and should be used in conjunction with PULSAR I&O manual 58-602. It is important that all instructions are read and followed carefully. Safety Messages The PULSAR system is designed for use in Category II, Pollution Degree 2 installations. Follow all standard industry procedures for servicing electrical and computer equipment when working w ...