Honeywell Home Pro Series Operation & User’s Manual

• Use built-in jumper (R Slider Tab) to differentiate between one or two transformer systems. • If there is only one R wire, and it is connected to the R, Rc, or RH terminal, set the slider to the up position (1 wire). • If there is one wire connected to the R terminal and one wire connected to the Rc terminal, set the slider to the down position (2 wires). NOTE: Slider Tabs for U terminals should be left in place for T6 Pro models. Wiring terminal designations ...

Read More About This Manual & Download PDF: Honeywell Series Pro Thermostat [pdf] User Guide/Manual No related articles ...

System modes: ‒ Auto ‒ Heat ‒ Cool ‒ Em Heat ‒ Off Fan operation settings 1 Press the Fan button to cycle to the next available Fan mode. 2 Cycle through the modes until the required Fan mode is displayed and leave it to activate. NOTE: Available Fan modes vary with system settings. Fan modes: ‒ Auto: Fan runs only when the heating or cooling system is on. ‒ On: Fan is always on. ‒ Circ: Fan runs randomly about 33% of the time. ...

1 Press and hold CENTER and buttons for approximately 3 seconds to enter advanced menu. 2 Press Select to enter ISU. 3 Press Select to cycle through menu setup options. 4 Press or to change values or select from available options. 5 Press Select and confirm your settings or press Back to ignore changes and return to ISU menu screen to continue editing another setup option. 6 To finish setup process and save your setting, press Home and return to Home screen. NOTE: A complete list of all setup (ISU) parameters and options starts below and continues ...

1 Press and hold CENTER and buttons for approximately 3 seconds to enter advanced menu. 2 Press Select to enter ISU. 3 Press Select to cycle through menu setup options. 4 Press or to change values or select from available options. 5 Press Select and confirm your settings or press Back to ignore changes and return to ISU menu screen to continue editing another setup option. 6 To finish setup process and save your setting, press Home and return to Home screen. NOTE: A complete list of all setup (ISU) parameters and options starts below and continues ...