D-Link DAP-1360 Operation & User’s Manual

User Manual Configuring Device (Router Mode) Parameter Description IP Obtain DNS server addresses automatically Select the checkbox to configure automatic assignment of DNS server addresses. If the checkbox is selected, the Primary DNS server and Secondary DNS server fields are not displayed. Primary DNS server/ Secondary DNS server Enter addresses of the primary and secondary DNS servers in the relevant fields. Vendor ID The identifier of your ISP. Optional. Miscellaneous Enable RIP Select the checkbox to allow using RIP for this connection. Enab ...

User Manual Configuring Device (Router Mode) When the WPA-PSK or WPA2-PSK value is selected, the WPA Encryption settings section is displayed: Figure 125. The WPA2-PSK value is selected from the Network Authentication drop-down list. Parameter Description Encryption Key PSK A key for WPA encryption. The key can contain digits and/or Latin characters. WPA2 Pre- authentication The checkbox activating preliminary authentication (displayed only for the WPA2-PSK authentication type). WPA Encryption An encryption method: TKIP, AES, or TKIP+AES. WPA renew ...

User Manual Installation and Connection 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed. Figure 8. The Network Connections window. Page 20 of 212 ...

User Manual Configuring Device (Router Mode) Creating PPTP + Static IP or L2TP + Static IP WAN Connection To create a connection of the PPTP + Static IP or L2TP + Static IP type, click the Add button on the Net / WAN page. On the opened page, select the relevant value from the Connection Type drop- down list and specify the needed values. Figure 109. The page for creating a new connection. The General settings and Ethernet sections. Parameter Description General settings Port A physical interface to which the new connection will be assigned. Name A ...

User Manual Overview Configuration and Management: • Multilingual web-based interface for configuration and management • Access via TELNET • Firmware update via web-based interface • Saving/restoring configuration to/from file • Support of remote logging • Automatic synchronization of system time with NTP server (router mode) • Ping function • Traceroute utility (router mode). LEDs: • Power • WLAN • WPS • LAN • Internet. Power: • External power adapter DC 12V • Reset to Factory Defaults button • WPS button. Operating ...

User Manual Configuring Device (Router Mode) The following buttons are available on the page: Control Description Save Click the button to save settings to the non-volatile memory. Please, save settings every time you change the device's parameters. Otherwise the changes will be lost upon hardware reboot of the access point. Factory Click the button to restore the factory default settings. Also you can restore the factory defaults via the hardware WPS/RESET button (see the Saving and Restoring Settings section, page 34). Backup Click the bu ...

User Manual Configuring Device (Access Point Mode) Figure 54. The page for adding an address for the MAC filter. On the opened page, enter the MAC address of the device from the access point's LAN in the MAC address field. To choose a device connected to the access point's LAN at the moment, select the relevant value from the drop-down list (the field will be filled in automatically). Then select the Deny value from the Action drop-down list and click the Change button. To remove an address from the list of MAC addresses for filtering, select the l ...