JWA JARVIS 74675 Assembly Instruction Manual

JARVIS 4 Drawer Tall Chest Imported by JWA Furniture Pty Ltd, Brisbane Qld, Australia. For any assistance with assembly or for missing parts please refer to your receipt 1

Additional tools required PRE-ASSEMBLY PREPARATION Before you start: 1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2. Take care when lifting. Product should be assembled as near as possible to the point of use 3. Ensure that you have all required contents for complete assembly 4. Always read the assembly instructions carefully before beginning assembly. 5. Keep all hardware parts and packaging out of reach of small children. 6. Do not over tighten the screws and bolts as this may damage the threads 7. Assembly is to be carried out by a competent adult(s) ONLY 8. During assembly, children should be kept away from the product due to possible risk to injury. 9. Do not use this item if any components are missing or damaged. 10. Please keep the instructions for future reference. 2

PARTS LIST A 21pcs M6x40mm B C E F J O 21pcs Ø15x12mm 16pcs 8x30mm 1pc M4 4pcs 4pcs 48pcs 40pcs P Z1 Z2 8pcs 16pcs 1pc G H N 40pcs V1 M3.5x12 16pcs 16pcs Ø12x10.5mm 4 M6x34mm M6x15mm

lock washer (Z1), washer (Z2). Using allen key ( ) to fix 100% as shown. H 11

12 STEP 7-3:Fix rails (N-2) to panel (12) (13) with screw (V1) STEP 7-2: Fix panel (11) (12) (13) to panel (10) with cam lock (P). Insert panel (14) into grooves between panel (9) (10) (12) (13). Fix panel (11) (12) (13) to panel (9) with cam lock (P).

attach the Mounting Plate into a stud. If mounting into brick or masonry you will need to acquire wall anchors. 2. Attach the second Mounting Plate to the furniture frame with the Short Screws. 3. Move the furniture to its final position. Thread a Wall Strap through the both Mounting Plates and tighten until snug. Do not over tighten. 4. Make sure that the Mounting Plates are firmly attached to the wall and furniture and that the Wall Strap is snug. Wall Back side Mounting Plate x 2 Wall Strap x 1 Large Screw x 2 Small Screw x 2 HARDWARE

• Avoid placing your furniture in direct sunlight. • Do not place furniture directly under windows. • Do not place sharp materials (knife, fork, etc.) directly onto your furniture as sharp material may scrape and damage the finish. • Do not place material with high temperature directly onto the surface of your furniture. • Clean up spills quickly. Water left over a prolonged period of time may cause damage. Alcohol, perfume, nail polishes, aftershave and some medication may cause severe finish damage if not cleaned immediately. • Use a clean, soft, dry, lint free absorbent cloth to clean your furniture. Do not use any detergent as they may contain ingredients that may react and damage the finish. NOTE: If the above care advise is not adhered to your product warranty may become void