Makita DHR264 Instruction Manual

Specifications

Brand:	Makita
Category:	Power Tool
Model:	DHR264
File Type:	PDF
File Size:	—
Pages:	80

Download

Download PDF Manual (80 pages)

Read Online

Read the Makita DHR264 Instruction Manual online using the built-in PDF viewer.

Text of the manual

GB Cordless Combination Hammer

INSTRUCTION MANUAL SI Brezžično kombinirano kladivo NAVODILO ZA UPORABO AL Çekiç me kombinim me bateri MANUALI I PËRDORIMIT BG �� -�� HR Bežični kombinirani rotirajući čekić PRIRUČNIK S UPUTAMA MK �� RO Ciocan combinat cu acumulatori MANUAL DE INSTRUCıIUNI RS �� RUS �� UA �� DHR263 DHR264

2 1 2 3 1 014402 1 2 012128 1 3 014417 1 4 014407 1 5 014408 1 A B 6 014409 1 2 3 7 012823 1 2 3 4 8 012824 1 9 014397 1 10 014398 1 11 014399 1 2 3 4 5 6 12 014403 1 2 13 009664 1 2 14 014404 1 2 15 014405

3 1 2 16 014420 17 014421 1 18 014406 1 19 001300 20 014410 1 21 002449 22 014415 1 2 23 014411 1 2 24 014416 1 2 3 25 014418 1 26 001145 1 2 27 014412

ENGLISH (Original instructions)

Explanation of general view 1-1. Red indicator 1-2. Button 1-3. Battery cartridge 2-1. Star marking 3-1. Battery indicator 4-1. Switch trigger 5-1. Lamp 6-1. Reversing switch lever 7-1. Quick change chuck for SDS-plus 7-2. Change cover line 7-3. Change cover 8-1. Spindle 8-2. Quick change drill chuck 8-3. Change cover line 8-4. Change cover 9-1. Rotation with hammering 10-1. Rotation only 11-1. Hammering only 12-1. Grip base 12-2. Teeth 12-3. Loosen 12-4. Tighten 12-5. Side grip 12-6. Protrusion 13-1. Bit shank 13-2. Bit grease 14-1. Bit 14-2. Chuck cover 15-1. Bit 15-2. Chuck cover 16-1. O symbol 16-2. Action mode changing knob 18-1. Depth gauge 19-1. Dust cup 21-1. Blow-out bulb 23-1. Chuck adapter 23-2. Drill chuck 24-1. Tighten 24-2. Drill chuck 25-1. Sleeve 25-2. Ring 25-3. Quick change drill chuck 26-1. Limit mark 27-1. Brush holder cap 27-2. Screwdriver SPECIFICATIONS Model DHR263 DHR264 Concrete 26 mm Steel 13 mm Capacities Wood 32 mm No load speed (min-1) 0 - 1,250 Blows per minute 0 - 5,000 Overall length 350 mm 374 mm Net weight 4.6 kg 4.7 kg Rated voltage D.C. 36 V • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Note: Specifications and battery cartridge may differ from country to country. • Weight, with battery cartridge, according to EPTA-Procedure 01/2003 ENE043-1 Intended use The tool is intended for hammer drilling and drilling in brick, concrete and stone as well as for chiselling work. It is also suitable for drilling without impact in wood, metal, ceramic and plastic. ENG905-1 Noise The typical A-weighted noise level determined according to EN60745: Sound pressure level (LpA) : 94 dB (A) Sound power level (LWA) : 105 dB (A) Uncertainty (K) : 3 dB (A) Wear ear protection ENG900-1 Vibration The vibration total value (tri-axial vector sum) determined according to EN60745: Model DHR263 Work mode : hammer drilling into concrete Vibration emission (ah,HD) : 14.5 m/s2 Uncertainty (K) : 1.5 m/s2 Work mode : chiselling Vibration emission (ah,CHeq) : 14.0 m/s2 Uncertainty (K) : 1.5 m/s2 Work mode: drilling into metal Vibration emission (ah,D) : 3.0 m/s2 Uncertainty (K) : 1.5 m/s2 Model DHR264 Work mode : hammer drilling into concrete Vibration emission (ah,HD) : 15.5 m/s2 Uncertainty (K) : 1.5 m/s2 Work mode : chiselling Vibration emission (ah,CHeq) : 14.0 m/s2 Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 5.0 m/s2 Uncertainty (K) : 1.5 m/s2 ENG901-1 • The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another. • The declared vibration emission value may also be used in a preliminary assessment of exposure. WARNING: • The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used. • Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). ENH101-16 For European countries only EC Declaration of Conformity We Makita Corporation as the responsible manufacturer declare that the following Makita machine(s): Designation of Machine: Cordless Combination Hammer Model No./ Type: DHR263, DHR264 are of series production and Conforms to the following European Directives: 2006/42/EC And are manufactured in accordance with the following standards or standardised documents: EN60745 The technical documentation is kept by: Makita International Europe Ltd. Technical Department, Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, England 18.6.2013 000230 Tomoyasu Kato Director Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi, 446-8502, JAPAN GEA010-1 General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. GEB046-2 CORDLESS ROTARY HAMMER SAFETY WARNINGS 1. Wear ear protectors. Exposure to noise can cause hearing loss. 2. Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury. 3. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. 4. Wear a hard hat (safety helmet), safety glasses and/or face shield. Ordinary eye or sun glasses are NOT safety glasses. It is also highly recommended that you wear a dust mask and thickly padded gloves. 5. Be sure the bit is secured in place before operation. 6. Under normal operation, the tool is designed to produce vibration. The screws can come loose easily, causing a breakdown or accident. Check tightness of screws carefully before operation. 7. In cold weather or when the tool has not been used for a long time, let the tool warm up for a while by operating it under no load. This will loosen up the lubrication. Without proper warm-up, hammering operation is difficult. 8. Always be sure you have a firm footing. Be sure no one is below when using the tool in high locations. 9. Hold the tool firmly with both hands. 10. Keep hands away from moving parts. 11. Do not leave the tool running. Operate the tool only when hand-held. 12. Do not point the tool at any one in the area when operating. The bit could fly out and injure someone seriously. 13. Do not touch the bit or parts close to the bit immediately after operation; they may be extremely hot and could burn your skin.

14. Some material contains chemicals which may

be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data. SAVE THESE INSTRUCTIONS. WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. ENC007-8 IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CARTRIDGE 1. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 2. Do not disassemble battery cartridge. 3. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. 4. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight. 5. Do not short the battery cartridge: (1) Do not touch the terminals with any conductive material. (2) Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc. (3) Do not expose battery cartridge to water or rain. A battery short can cause a large current flow, overheating, possible burns and even a breakdown. 6. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50 ﾟ C (122 ﾟ F). 7. Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire. 8. Be careful not to drop or strike battery. 9. Do not use a damaged battery. 10. Follow your local regulations relating to disposal of battery. SAVE THESE INSTRUCTIONS. Tips for maintaining maximum battery life 1. Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power. 2. Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life. 3. Charge the battery cartridge with room temperature at 10 ﾟ C - 40 ﾟ C (50 ﾟ F - 104 ﾟ F). Let a hot battery cartridge cool down before charging it. 4. Charge the battery cartridge once in every six months if you do not use it for a long period of time.

Always be sure that the tool is switched off and the

battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge Fig.1 CAUTION: • Always switch off the tool before installing or removing of the battery cartridge. • Hold the tool and the battery cartridge firmly when installing or removing battery cartridge. Failure to hold the tool and the battery cartridge firmly may cause them to slip off your hands and result in damage to the tool and battery cartridge and a personal injury. To remove the battery cartridge, slide it from the tool while sliding the button on the front of the cartridge. To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Insert it all the way until it locks in place with a little click. If you can see the red indicator on the upper side of the button, it is not locked completely. CAUTION: • Always install the battery cartridge fully until the red indicator cannot be seen. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. • Do not install the battery cartridge forcibly. If the cartridge does not slide in easily, it is not being inserted correctly. NOTE: • The tool does not work with only one battery cartridge. Tool / battery protection system The tool is equipped with a tool/battery protection system. This system automatically cuts off power to the motor to extend tool and battery life. The tool will automatically stop during operation if the tool or battery are placed under one of the following conditions. In some conditions, the indicators light up. Overload protection When the tool is operated in a manner that causes it to draw an abnormally high current, the tool automatically stops without any indication. In this situation, turn the tool off and stop the application that caused the tool to become overloaded. Then turn the tool on to restart. Overheat protection for battery When the battery is overheated, the tool stops automatically without any indication. The tool does not start even if pulling the switch trigger. In this situation, let the battery cool before turning the tool on again. NOTE: The battery overheat protection works only with a battery cartridge with a star marking. Fig.2 Overdischarge protection Fig.3 When the remaining battery capacity gets low, the battery indicator blinks on the applicable battery side. By further use, the tool stops and the battery indicator lights up about 10 seconds. In this situation, charge the battery cartridge. Switch action Fig.4 CAUTION: • Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop. Lighting up the lamp Fig.5 CAUTION: • Do not look in the light or see the source of light directly. Pull the switch trigger to light up the lamp. The lamp keeps on lighting while the switch trigger is being pulled. The light automatically goes out 10 - 15 seconds after the switch trigger is released. NOTE: • Use a dry cloth to wipe the dirt off the lens of lamp. Be careful not to scratch the lens of lamp, or it may lower the illumination. • Do not use thinner or gasoline to clean the lamp. Such solvents may damage it. Reversing switch action Fig.6 This tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for counterclockwise rotation. When the reversing switch lever is in the neutral position, the switch trigger cannot be pulled. CAUTION: • Always check the direction of rotation before operation. • Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. • When not operating the tool, always set the reversing switch lever to the neutral position.

Makita DHR264 Instruction Manual

Specifications

Download

Read Online

Text of the manual

GB Cordless Combination Hammer

ENGLISH (Original instructions)

Work mode: drilling into metal

14. Some material contains chemicals which may

Always be sure that the tool is switched off and the

Changing the quick change chuck for SDS-

The depth gauge is convenient for drilling holes of

Always be sure that the tool is switched off and the

SLOVENŠČINA (izvirna navodila)

Delovni način : klesanje

13. Takoj po končani obdelavi se ne dotikajte

Pred vsako nastavitvijo ali pregledom delovanja

Zamenjava vrtalne glave za hitro zamenjavo

Merilnik globine je priročen za vrtanje lukenj z

Blokiran sveder preprosto sprostite tako, da s

SHQIP (Udhëzimet origjinale)

Regjimi i punës : zdrukthim

fluturojë dhe mund të lëndojë rëndë ndonjë

PËRSHKRIMI I PUNËS

Ndryshimi i mandrinës për ndryshimin e

Këndi i puntos

Vendosni dorezën e ndryshimit të regjimit të punës në

��������� (���������� ����������)

������� ����� : ��������

������ � ������� ��� ���� ����� �������

����� �� ���������� ��� ����������� ��������

����������� ���� ����� �� �� ���������

� ���� ���������� �� ������ �� ����������

���� ���� �������� ���������� �������� �� ������.

��������� �� ����������� �� �������, �� ��� �

HRVATSKI (Originalne upute)

Način rada: bušenje metala

14. Neki materijal sadrži kemikalije koje mogu biti

Obavezno provjerite je li stroj isključen i baterija

Promjena glave za brzu promjenu za SDS-

Kut nastavka (za rezanje, sječenje ili rušenje)

Pri bušenju rupe na alat/nastavak utječe velika

���������� (���������� ��������)

������� ����� : ���������

���� � ����� �������, ��� ���� ������ ��

���� �� ���������

���������� �� ������� ������

��������� ����� (������� �����)

��������� ���� �� ����� ����� �� ������ ����

���� ������ ��� �������� �� ������������� ��

ROMÂNĔ (InstrucĲiuni originale)

Mod de funcĲionare: dăltuire

Nu lĕsaĲi maşina în funcĲiune. FolosiĲi maşina

AsiguraĲi-vă întotdeauna că maşina este oprită şi

rotaĲie înainte de oprirea maşinii poate avaria maşina.

Unghiul de atac al burghiului (la operaĲii de

PuteĲi executa găuri cu un diametru de maxim de 13

������ (���������� ��������)

����� ���� : ���������

��������� �� �� ���� ����� ����� �������

���� �������� �����

���� ��������� ������ �������� ��� ��������.

���������� ��� ������� ����

�� ����� DHR264

������� ���� (������������ ����������)

������� �����: ��������� � ����������� �

����� ����������� ����� ��������� �

������ �� ����������� �������������

������ �� ����������

������� �� �������� �����������.

���������� �������. �������� ������� �������� �

����������� ������������ ����� ��������� �

���������� (����������� ����������)

����� ������: ���������� ������

���������� �� ���������������� ������

���������� � ������������

��� �������� ���������� ����

���������, � ������ � ������������ ���� �����,

���� ���������� ������ ��� ������������, ��� ���

�� ��������� ��� �������� �������������

�� (�� )

�� : ��

��

��

��

� ��

�� .

�� , ��

�� (�� )

�� : ��

�� , ��

��

��

�� (�� )

��

��

�� (�� )

�� : ��

��

��

�� .

��

�� DHR264

�� (�� )

�� : ��

��

��

��

�� .

�� . ��

��

�� (�� )

�� : ��

��

��

��

��, � �� ,

�� , ��

��