D-Link DIR Series Configuration Manual
Text of the manual
HOW TO ACCESS THE DEVICE
HOW TO CONFIGURE INTERNET
WIRELESS SETUP
Configuration Guide
for DIR series routers
HOW TO ACCESS THE DEVICE:-
Connect the power adapter to the
power socket and other end to the
device and power on the device.
2)
1)
Once the device is powered on,
power LED and the Wi-Fi LED on the
device will be green.
3)
4)
5)
Unbox the device.
Connect one end of the Ethernet
cable provided in to the box into any
of the 4 LAN port of the device at the
back side and connect other end to
the LAN port of your Desktop/Laptop.
Or you can connect to the device
wirelessly. Go to wireless utility of
your laptop. You will be able to view
the available wireless networks. By
Default wireless network name of
the device i.e. SSID is “dlink” and
there is no password in default
settings. Select the “dlink” SSID and
say “connect”, Kindly see the below
screenshot. After this you will be get
connected to the router.
HOW TO ACCESS THE DEVICE:-
6)
7)
8)
Then go to the web browser and type
http://192.168.0.1 in the address bar.
You will get the login page of the
router, the default username is
admin and there is no password in
default settings, leave the password
field blank.
You will get the current network
settings page of the device, which
will show you the status of internet,
wireless and mydlink.
