jablotron 100 Operation & User’s Manual

indication button. You need to authorize yourself using the keypad in order to terminate the alarm. The section remains set, a rapidly flashing red segment button indicates the alarm memory. Indication will keep on flashing even after the system has been unset. If the alarm memory indication was activated during your absence, search for the cause of the alarm in the event history and be very careful when entering and checking the premises or wait until the security agency arrives (provided your ...

It is possible to configure calendar events (unsetting / setting / partial setting, controlling or blocking PG outputs). The calendar events can be set up via the J-Link software in the Calendar tab. For each calendar event, action, section or PG output and event time can be set. Day can be defined by a day of week, month or year. For the selected day you can set up to 4 times to perform an action or to set repeating at regular intervals. Therefore, calendar events can be customized not only for sections control but also for controlling various technologies in t ...

Statuses of individual sections are indicated by status indicators A, B, C, D above the LCD display and by the functions buttons. The control panel can be operated directly (setting or unsetting the alarm and other automation functions) using function buttons on the keypad. The function buttons and the status indicators A, B, C, D are colourfully backlit in order to clearly indicate the section status. a GREEN – Unset a YELLOW – Partially Unset a RED – Set Authorization can be done by entering an access code on the keypad or usin ...

Ways to improve protection against guessing the valid code: a Using a code with more digits (6 or 8-digit codes), a More advanced types of authorization (such as “Card confirmation with a code” or “Double authorization”). Ways of operating the JABLOTRON 100+: On-site: a System keypad a System keyfob a Computer using a USB cable and the J-Link software Remotely: a MyJABLOTRON smartphone application a Computer via the MyJABLOTRON web interface a Telephone using the voice menu a Telephone via SMS a Computer via the inter ...

This function provides unsetting of the system in a special mode. The system seemingly unsets, however it triggers a silent panic alarm, which is then reported to selected users (including ARC). Unsetting under duress is executed by adding 1 to the last number in a valid code. Example for a code with the prefix: Valid code: 2*9999 Code for unsetting under duress: 2*9990 Example for a code without the prefix: Valid code: 9999 Code for unsetting under duress: 9990 2.1.2.4 PARTIAL ALARM SETTING The system can also be configured to be partially set which allows ...

1. INTRODUCTION 3 2. OPERATING THE JABLOTRON 100+ SYSTEM 3 2.1 ON-SITE OPERATING 5 2.1.1 USING THE SYSTEM KEYPAD 5 2.1.2 KEYPAD CODE AUTHORIZATION 7 2.1.2.1 ALARM SETTING 9 2.1.2.2 ALARM UNSETTING 9 2.1.2.3 DURESS ACCESS CONTROL 10 2.1.2.4 PARTIAL ALARM SETTING 10 2.1.2.5 TERMINATING A TRIGGERED ALARM 10 2.1.2.6 SECTION CONTROL FROM THE MENU OF THE KEYPAD WITH AN LCD DISPLAY 11 2.2.1 USING THE JA-110E AND JA-150E SYSTEM KEYPADS 12 2.2.1.1 ALARM SETTING 14 2.2.1.2 ALARM UNSETTING 14 2.2.1.3 PARTIAL ALARM SETTING 15 2.2.1.4 DURESS ACCESS CONTROL 16 2.2.1.5 TERMINATING A T ...