AVProEdge AC-DAC-CO2 Quick Start Manual

AC-DAC-CO2 Quick Start Guide The AC-DAC-CO2 is the second iteration of the Digital to Analog converter available from AVPro Edge. This DAC provides a new, industrial-style chassis with an improved locking barrel plug for a secure installation. It can accept digital (L)PCM signals up to 96KHz 24Bit, converting them to an analog 20-20,000Hz PCM signal. This quick start guide will be going through: • Installation • Product breakdown • Troubleshooting Installation: 1. Connect the digital audio Input source to the desired input on the AC-DAC-CO2. 2. SET the Input Source switch to the desired input on the AC-DAC-CO2. 3. Connect the analog RCA output to the desired Audio Playback device. 4. Connect power to the AC-DAC-CO2. Product Breakdown: Input side 1. Toslink Input: Connect to the Optical audio source 2. Optical and Coax LEDs: These Leds will illuminate according to which input is Currently selected 3. Coax/Optical Switch: Select which digital audio input is active and will be converted to analog stereo (L/R) audio 4. Coaxial INPUT: Connect to the Coaxial digital audio source

output side 1. l/r RCA output: ANalog Stereo output. used to Connect to the input of your audio device or display 2. DC 5V 1a: Connect the 5V DC power supply to the unit and plug the adapter into an AC wall outlet Troubleshooting: • No Audio – Ensure desired input is selected. • No Audio – Ensure multichannel audio is not selected. • No Audio – Ensure encoded bitstream audio is not selected (Dolby/DTS). • No Power – Use Multimeter to Test 5V PSU. Have a question or need assistance? Don’t hesitate to contact us! SUPPORT: +1 605-274-6055 USA TOLL FREE: 877-886-5112 EMAIL: [email protected]