D-Link DVC-1100 Quick Installation Manual

Check Your Package Contents Standalone Wireless Videoconferencing Over Broadband IP 5V DC, 2A Power Adapter i2eye DVC-1100 Wireless VideoPhone Includes Detachable Antenna Quick Installation Guide and Instruction Manual Ethernet (CAT5 UTP/Straight Through) Cable Standard Composite RCA Audio/Video Cable Remote Control Patent Pending different voltage rating will damage this product and void the warranty. Using a power supply with a 1. Using the D-Link i2eyeTM DVC-1100 Wireless VideoPhone requires a connection to the Internet over a Broadband connection (e.g., a Cable modem or a DSL modem with a router). 2. Attaching a telephone to the DVC-1100 is optional, but highly recommended for optimal sound quality. 3. If you are sharing the Internet connection with another device (such as a PC) you will also need a wireless broadband router or wireless residential gateway. Wireless VideoPhone

VideoPhone A. Place the DVC-1100 Wireless VideoPhone directly on top of a television. To obtain the best viewing experience, the VideoPhone should be 5 to 10 feet away from the intended subject. B. Attach the supplied audio/video cable to the DVC-1100 and to the matching audio/video jacks on the television or VCR. C. To connect to a network using an Ethernet cable, attach the supplied Ethernet cable to the DVC-1100 and to the Cable or DSL modem or Ethernet network device (hub, switch or router). D. To connect using a wireless network, attach the supplied antenna to the DVC-1100. E. Attaching a telephone is optional, but recommended for optimal sound quality. Attach a standard telephone cable to the telephone and directly to the DVC-1100. Do NOT attach the telephone to a wall telephone outlet. F. Plug the supplied AC power cable into an AC outlet and then into the DVC-1100. G. Attaching an external microphone is optional, but recommended for optimal sound for a group videoconference. F F B E G C i 2 e y e i 2 e y e i 2 e y e i 2 e y e i 2 e y e

With the DVC-1100 When you have completed the steps in this Quick Installation Guide, your connected VideoPhone should look similar to this: Before using your D-Link DVC-1100 Wireless VideoPhone, you will want to understand the network requirements for this device. If you are using a residential gateway or router and sharing the broadband connection with your DVC-1100, please read the section starting on Page 47 of the manual included with the DVC-1100.

The DVC-1100 Wireless VideoPhone needs to be setup before use. There is an easy to use Setup Wizard built into the DVC-1100 to accomplish the setup. You will use the Setup Wizard along with the remote control included with the DVC-1100. The remote control is used to enter numbers, characters and to make selections from a keyboard that is displayed on the TV screen. Mute Video Mute Audio Cancel ENTER key Number sign Adjust Contrast Speakerphone Mode The * (asterisk--sometimes called a “star” key) is used to enter a “.” (period also called a “dot”.) When entering alphanumeric information the left arrow key performs a backspace, deleting the character to the left of the on-screen cursor. When a numeric input is required, (e.g., a telephone number or IP address) enter it directly by pressing the number keys. Use the arrow keys to move the position of the on-screen cursor. i 2 e y e i 2 e y e i 2 e y e i 2 e y e i 2 e y e

Using the On-Screen Keyboard Whenever you need to enter numbers or letters into a Setup screen, press ENTER on the remote control and the on-screen keyboard appears: After entering characters or numbers, and to execute a selection, press ENTER on the remote. Use the arrow keys to move the cursor on the screen to the desired character. The cursor can wrap around on the right and left side of the keyboard to assist you in “typing” a character quickly. To remove the keyboard from the screen, highlight the OK key and press ENTER on the remote. Also, the CANCEL key on the remote removes the keyboard from the screen, leaving what you typed on the screen. You cannot use a telephone plugged into the i2eye VideoPhone to place regular phone calls as the phone would not be con- nected to a standard phone line. Only VideoPhone calls over the Internet can be made with a telephone connected to the DVC-1100. Shift Key for UPPER, lower case or shift lock In addition to providing optimal sound quality, a telephone: • Can be used to start a videoconference similar to the way you would place a regular telephone call. • Lets you receive a videconference call similar to the way you would receive a regular telephone call.

Personal Information Screen Enter your name and phone number (consisting of a Country code, Area code and Phone number.) The phone number you enter is one you create for family, friends and others to call you. You can use your regular phone number or make up a new one. The Caller ID function displays this name at the other end of the connection. Your number willl not be visible to anyone else. Click Next Click Next Press the power switch on the back of the DVC-1100 and the Welcome Screen appears. Note: The Country code for the United States and Canada is “1”. See Page 71 of the DVC-1100 manual for Country codes of other countries.

Connect to a Wireless Network Configure Your Wireless Settings Note: The number next to the SSID indicates the sig- nal strength of the available access point on the wireless network. Highlight the SSID of the de- vice you wish to connect to and press Enter on the re- mote control. (Only if using DVC-1100 in wireless mode. Wireless mode is enabled by default.) Press Enter to choose the Authentication Type be- tween Open System and Shared Key. Press Enter to choose the appropriate WEP Type be- tween 64, 128 or 256 bits. Press Enter to select the Key ID you wish to use. Enter the your encryption keys here. Note: If you have any questions regarding using wireless encryption on the DVC-1100, please refer to DVC-1100 manual on page 12. Click OK Note: The wireless settings must match your existing wireless network settings.

The Setup Wizard (continued) Site survey box highlights the SSID you have already chosen. Once connected, the status message should say “Wireless Connection OK” Connect to an Ethernet Network Using a Cable Uncheck the “Enable Wire- less” checkbox. Click Next (Skip this step if you are connecting to a wireless network.)

If you manually entered an IP address in the Network Address screen, you will see the screen for setting DNS server addresses. Only a primary DNS is required. Click Next DNS Screen Network Address Screen To configure a router to work with the DVC-1100, please see the section on starting on page 47 of the DVC-1100 manual. Leave the Obtain an IP ad- dress automatically check- box checked to obtain an IP address and other Internet settings automatically. If you cannot automatically be assigned an IP Address (through DHCP), then uncheck the checkbox and manually enter the IP Ad- dress, Subnet mask and Gateway. Host name is rarely used and this field is not re- quired. Click Next X

Your Setup is Complete! Click Yes System Restart Select the type of broadband Internet connection you use. Click Next Network Speed Screen

D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link Technical Support through our website, or by phone. Tech Support for customers within the United States: D-Link Technical Support over the Telephone: (877) 453-5465 24 hours a day, seven days a week. D-Link Technical Support over the Internet: http://support.dlink.com email:[email protected] Tech Support for customers within Canada: D-Link Technical Support over the Telephone: (800) 361-5265 Monday to Friday 8:30am to 9:00pm EST D-Link Technical Support over the Internet: http://support.dlink.ca email:[email protected]