Furrion Vision S Instruction Manual

the first time you are using your Vision S Camera System. NOTE: Ensure both the camera and monitor have power supplied during Pairing and setting processes. (The vehicle may need to be running.) Activate the Monitor In off mode, press the Menu button on the right of the monitor to turn on the monitor and enter the menu setting page. In on mode, press the Menu button to activate the menu setting page. There are four options that allow you to set the wireless vehicle rear observation system before operating. Touch one of the four option ...

icon will appear after the device list. 4. An icon indicates pairing failed, repeat steps 2 and 3 to pair again. 5. Repeat steps 1 to 4 to pair the other cameras. 6. Refer to “General Setup” section on detail settings of the camera. ...

Though your monitor requires little care, you will still need to maintain its condition and performance by following the guidelines below. � Keep your system away from excessive moisture, extreme heat or cold. � Keep liquids away from the display. � Occasionally clean the surface of the monitor with a soft cloth moistened with water or glass cleaner. Only clean the unit with a dry cloth. Do not clean the unit with strong chemical agents or abrasive cleaners. Never spill liquid of any kind on the product. Do not allow residue or liquids to enter any part of the applia ...

INSTALLATION NOTE: We have included all of the items needed for most standard installations, but all vehicles are different. We recommend you review your vehicle completely before starting. What’s in the Box Make sure you have all the following items included in the packaging. If any item is damaged or missing, contact your dealer. � Monitor x 1 � Windshield Stand x 1 � Interior Table Stand x 1 � Monitor Power Cable x 1 � Camera (different by model) � Warranty Card x 1 � Instruction Manual x 1 NOTE: The contents included may be ...

product, please read these instructions carefully. This instruction manual contains information for safe use, installation and maintenance of the product. Please keep this instruction manual in a safe place for future reference. This will ensure safe use and reduce the risk of injury. Be sure to pass on this manual to new owners of this product. The manufacturer does not accept responsibility for any damages due to not observing these instructions. If you have any further questions regarding our ...

angle as NORMAL (0o), ROTATE (90o), FLIP (180o) or FLIP and ROTATE (270o). 4. Repeat steps 2 and 3 to set the other camera. VOLUME SETTING 1. Touch VOLUME on screen to enter the submenu. 2. Press or to decrease or increase the volume or door and rear cameras. AUTO DIM SETTING 1. Touch AUTO DIM on screen to enter the submenu. 2. Press or to enable or disable the screen brightness auto adjustment function. ...