Hercules HD83B Owner's Manual & Safety Instructions

Item 57242 Parts List and Diagram Part Description Qty 1 Left Housing 1 2 Anti-Vibration Pad 25×8×4.7 2 3 Anti-Vibration Pad 28×9.6×7 2 4 Front Cover 1 5 Gear Box 1 6 O-Ring Ø14xØ2 1 7 Bearing Bushing Ø20×Ø14×12 1 8 Washer Ø14×Ø30×0.5 1 9-1 T-Shaft 1 9-2 Impact Block 1 9-3 Gear Ø14.5×4.5 2 9-4 Cylindrical Pin Ø3.5×7.7 2 9-5 Gear Ring Ø41.8×8.2 1 9-6 Washer Ø12.5×Ø17.5×0.5 1 Part Description Qty 9-7 Gear Ø8×17.8 1 10 Bearing 1 11 Gear Box Cover 1 12 O-Ring Ø12.6 1 13 Cross Recess Pan Head Screw M3X6 2 14 Fix ...

Item 57242 Warning Symbols and Definitions This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not rela ...

Item 57242 General Instructions for Use 1. Make sure that the Trigger is in the off-position, then insert a fully charged Battery Pack into the base of the Impact Wrench, making sure that it clicks into place securely. WARNING! The tool will restart automatically if stalled. 2. Set Direction Switch. Forward: Push Switch in on right side (arrow pointing forward) for clockwise rotation. Reverse: Push Switch in on left side (arrow pointing backward) for counter-clockwise rotation. Trigger Lock: Push Switch to the center to lock the T ...

Item 57242 IMPORTANT SAFETY INFORMATION General Power Tool Safety Warnings Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Work Area Safety a. Keep work area clean and well lit. Cluttere ...

Item 57242 i. Only use safety equipment that has been approved by an appropriate standards agency. Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI-approved and breathing protection must be NIOSH-approved for the specific hazards in the work area. j. Do not lay the tool down until it has come to a complete stop. Moving parts can grab the surface and pull the tool out of your control. k. When using a handheld power tool, maintain a firm grip on the tool with both hands to resist starting to ...

Item 57242 Warning Symbols and Definitions This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not rela ...

Item 57242 MAINTENANCE AND SERVICING INSTRUCTIONS Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Trigger is in the off-position and remove its Battery Pack before performing any procedure in this section. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. Cleaning, Maintenance, and Lubrication 1. BE ...