Da-Lite DELUXE MODEL B Operating Instructions

DELUXE MODEL B EXCLUSIVE FEATURES • Built-On Hanging Brackets for Ceiling • Rugged Construction • Octagon No-Rub Flat Back Case • Seamless in All Sizes • Uniform Automatic Tensioning • Wrinkle-Free Pictures • Completely Self-Storing • Camlok Roller System Prevents Picture Surface From Pulling Off Metal Roller ADJUSTMENT NOTE NOTE: Tensioning of the Deluxe Model B picture surface was made at the factory. Should more tension be required, the screw in the channel holding the upper tension arm assembly should be moved upward in holes allotted for this purpose. For any adjustment, it is recommended that the screen be removed, placed on a flat surface and a pair of pliers and a Phillips screwdriver be used in removing the screw and nut. PROTECT YOUR SCREEN Before re-rolling surface into case, examine both front and back of surface to be sure they are free of foreign matter. Upper tension arm assembly Nut Screw Channel BACK VIEW OF SCREEN Case Upper tension arm assembly DA-LITE IS MORE THAN PROJECTION SCREENS Da-Lite Tripod, Wall and Ceiling and Electric Screens Da-Lite Lecterns Da-Lite Project-O-Stands and Easels Da-Lite Monitor Mounts Operating Instructions for Deluxe Model B® DA-LITE SCREEN COMPANY, I 3100 North Detroit Street Post Office Box 137 Warsaw, Indiana 46581-0137 Phone: 574/267-8101 800-622-3737 Fax: 574/267-7804 www.da-lite.com e-mail: [email protected] The Da-Lite Difference

the ceiling or used with extension type wall brackets to allow room for the Automatic Tensionizer. FOR WALL MOUNTING Special extension wall brackets such as Da-Lite’s No. 6, No. 11 or No.23 brackets must be used if screen is to be wall mounted. Check with your dealer to determine which best fits your needs. Brackets should be fastened securely to a solid surface such as a wooden reinforcement board and not in the plaster only. Rarely will wall studs be found to support both ends of a screen. Various types of fasteners are available from local hardware stores. FOR CEILING SUSPENSION If the screen is to be ceiling mounted, two screw hooks should be placed in a beam or other solid surface. For drop ceilings, Da-Lite’s T-Bar Clips may be purchased. SETTING UP YOUR SCREEN These illustrations (all rear views for simplification) show how easy the Deluxe Model B Screen is to operate. 1. Remove plastic protective wrap from handle and tension arm. 2. To start unrolling the picture surface, pull down on cord pull knob. Then with hand resting on the handle, pull screen down. 3. The automatic tension arm moves into position in a precision- like manner. 4. When surface is down, a simple press of contour-shaped handle locks it into position… ready for the show! 5. To re-roll picture surface–press firmly downward and counter- clockwise on flat handle to release lock. Permit surface to re-roll rapidly into case. Control upward movement by lightly holding handle or cord pull knob. PROTECT YOUR SCREEN by keeping it rolled in its case when not in use. Always examine both front and back of surface before re-rolling into case to make certain screen is free of dust, dirt or other foreign matter. Use a very soft duster to gently remove any foreign particles. YOU HAVE MADE A WISE SELECTION… Care in mounting and care in correct operation will mean a long and satisfac- tory life for your Da-Lite wall/ceiling screen. Locate the screen where the audience can best see it. SCREEN ACCESSORIES WALL BRACKETS Da-Lite No. 6 and No. 11 Non-adjustable wall brackets and No. 23 adjustable extension wall brackets are ideal for keystone elimination, chalkboard clearance, or corner mounting. The screen brackets should be fastened to the studding or other solid surface and not in the plaster only. Suspend screen from “D” rings. No. 23 ADJUSTABLE WALL BRACKETS Screen can be extende 10"-24" from wall by wing nut and bolt adjustment. No. 11 WALL BRACKETS Screen can be extende 10" or 14" from wall by changing position of bracket. No. 6 WALL BRACKETS Screen can be extende 6" from wall. T-BAR CLIP For Drop Ceilings 50 lb. max. load capacity. TILT LOCK For Keystone Eliminatio Holds back bottom of screen in tilted positi to eliminate keystoni