IAdea XDS-108 Series Quick Start Manual

This printed quick guide provides a quick walk-through of the set up process. For complete documentation, please visit http://support.IAdea.com. Box Content Mounting and Installation Standard VESA mount This smart signboard accepts a MIS-D (75 mm x 75 mm) VESA-Compliant mounting interface and the recommended screw is M3 x 7.5 mm exclud- ing bracket thickness. Use the flush mount screw provided in-box to easily install the flush mount bracket onto the smart signboard. Reseting smart signboard to factory default Factory reseting the smart signboard will result in the removal of all saved con- tents, passwords, and configurations in settings. Please refer to the steps below to complete the smart signboard factory reseting process: Please follow the instructions below to collect the player's DEBUG log: How do I provide a DEBUG log for a misbehaving signboard to the support team? Troubleshooting Press at one corner of the screen and hold for 10 seconds to exit playback and enter setup menu. How do I interrupt playback and enter setup menu? Prepare a blank USB stick in FAT-32 format. 1 Create a folder named "DEBUG" (case insensitive) in the root of USB stick. 2 Make sure the player is operating (see welcome screen or playing content). 3 Insert the USB stick into player and wait for 30 seconds. 4 Within the "DEBUG" folder, is a folder with a string of number as its name. If the string of numbers are all zero's, the debug log has not been collected properly. Repeat step 1-4 again and make sure to wait the 30 seconds. 5 Zip the"DEBUG" folder and send to IAdea Support Team. 6 Use a pen to press and hold the reset button - do not release until Step 4. 1 Insert the power cord. 2 Wait 30 seconds for the system reboot indicating your data is erased. 3 Release the reset button and your smart signboard will initialize in factory default state. 4 1 2 Flush mount 1 2 Smart signboard Power adapter with changeable plug Flush mount bracket with screw Important: Users are recommended to keep the flush mount bracket in direct contact with the to-be-mounted surface when operating the smart signboard to ensure the weight of the device is fully supported by the flush mount.

is the preferred method of connecting to network) located at the back of the smart signboard and it will power on automatically. Once the user has exited the boot up screen, users can go through system configurations in both landscape and por- trait orientations. System Setup Content Management Please consult the software documentation for information specific to your content management solution. Users can set content by clicking "Set Content" to enter the URL or use the desired content manage- ment system to upload the contents onto the smart signboard. To change smart signboard system language of the XDS-108X series, use touch or USB mouse to select “(Current Language) ....” For system con- figurations, select “Advanced.” Important recommended configurations: Port Connections Set correct time, date, and time zone for properly scheduled playback. 1 Set password to prevent unauthorized access during setup menu. 2 Set network for establishing network connection. 3 Basic settings When boot up is complete, the user will see the “Basic settings” which allows the user to make configurations or autoplay preloaded content. Please note, the smart signboard is set to autoplay preloaded content 15 seconds after boot up. This can be canceled if “Cancel autoplay in 15s” is selected which lets the user remain on the “Basic settings” and initiate playback manually. 2 Enable NFC keyboard in Wireless & networks if NFC feature is required. 4