CWSI CP-3000A Quick Start Manual
Text of the manual
Quick Start Guide
Field Reference Manual
Version 2.0
This document is intended for use as an installation and service guide by
factory certified CWSI trained personnel only and is subject to change at any
time as new products are introduced. Consult all CWSI UL listed product
manuals for proper programming and compliance listings.
This document is not
Table of Contents
Dipswitch settings, Base Code, Clearing……………………………………….……………….. 2
Terms and Definitions………………………………………………………………….……………….. 3
Serial Number assignments, Installation tips.……………………………………………….. 4
Repeater
CWSI Field Reference Guide
Reference
Dipswitches
All 6 dipswitches on your Panel should be to the left (ON position).
Under normal operation repeater dipswitches are: 1 & 6 to the right (OFF) 2-5 to the left (ON).
For doing the initial Pre-Installation Survey Procedure and setting a Repeater into survey mode dipswitches
are: 1 (OFF) 2-6 (ON).
Repea
Terms and Definitions
Tree/Layout- This refers to your Network Layout which you can download and view at any time with your CP-
3000 Suite software tool using the Network Layout option.
Log- Refers to Event Log retrieved with CP-3000 Suite using the Event Log option.
Pre-Installation Survey Procedure - This indicates placing a repeater into survey mode by
Serial Number assignments
Each type of device starts with a unique serial number. You can tell what type of device is reporting to the
panel by looking at the first one or two digits in the number.
Serial Number List:
000XXX – CP-3000A
003XXX – CP-3000DA
03XXXX – AR-3A Repeater
5XXXXX - RB-XX
100XXX- 300 Smoke
20XXXX – 301 Smoke
119XXX – 302 Smok
