ExcelTek RM-11 Programming Instructions

Please read the instructions thoroughly BEFORE you begin the installation process. This garage door opener can control up to 2 devices of most major brands including Chamberlain, Craftsman, Liftmaster, Genie, Linear and Wayne Dalton. For more details about compatibility please refer to the brand table chart on the back of this page. If you are experiencing any issues or if you are unsuccessful in programming your ExcelTek™ universal remote after a few tries, please kindly contact us through Amazon Message and we will provide additional troubleshooting steps to solve your problem. Simply go to your order page and after click on the hyperlink Sold By: ExcelTek. There you’ll find a button on the upper right of your screen “Ask a question”. ***PLEASE NOTE THAT A VIDEO TUTORIAL IS AVAILABLE ON THE PRODUCT PAGE*** Programming for devices featuring a Learn (Smart) Button. 1. Start with the garage door in a closed position. Use your thumb to slide open the remote front panel. 2. Press and hold down the program button until the LED light turns blue (about 2 seconds). This turns on the programming mode. 3. Locate the Learn (Smart) Button on the back or on the side panel of the garage door opener. Press and release it. 4. Choose what remote control button you want to program and press and release it. The LED light will flash. When the LED light stop flashing, press and release the button again. Continue to press and release up to 18 times until the garage door opener responds by doing one of the following: a. Making a clicking sound b. Blinking lights c. Opening or closing door d. Beep is heard 5. Once you have a response from your garage door opener, save the programming by clicking the program button on your ExcelTek™ remote. This turns off the programming mode. 6. You’re now done, and you should be able to open and close your garage door. If your garage door does not activate repeat the programming steps.

❖ With the original remote 1. Open up your original remote to access the Dip switches panel. 2. Set up the dip switches in your ExcelTek™ remote to match your original remote. 3. Press and hold down the program button until the LED light turns blue (about 2 seconds). 4. Choose what remote control button you want to program and press and release it. The LED light will flash. When the LED light stop flashing, press and release the button again. Continue to press and release up to 18 times until the garage door opener responds. 5. Once you have a response from your garage door opener, save the programming by clicking the program button on your ExcelTek™ remote. This turns off the programming mode. 6. Refer to your garage door opener’s installation manual for more programming instructions. Brand Table Numbers of presses on the programming button Brand Type/Color of Smart/Learn Frequency 1 Linear Mega code ‘97-Current 318 Mhz 2 Chamberlain Orange Button ‘97-‘05 390 Mhz 3 Chamberlain Purple Button ‘05-Current 315 Mhz 4 Chamberlain Green Button ‘93-‘96 390 Mhz 5 Genie Overhead door Intellicode ‘95-Current 315 Mhz 6 Genie Overhead door Intellicode ‘05-Current 390 Mhz 7 Stanley Security Code ‘97-Current 310 Mhz 8 Chamberlain Yellow button 2011-current 310/315/390 Mhz ★9 Wayne Dalton Rolling code 1999-Current 372.5 Mhz 10 Chamberlain 9 Position 1990-1992 390 Mhz 11 Chamberlain 9 Position 1983-1989 315 Mhz 12 Genie 12 Position 1985 390 Mhz 13 Linear Multi Code 10 Position 300 Mhz 14 Chamberlain 8 Position 390 Mhz 15 Stanley / Multi Code 10 Position 310 Mhz 16 Genie 9 Position 390 Mhz 17 Linear Moore-O-Matic 8 Position 310 Mhz 18 Chamberlain 7 Position 390 Mhz *Note: The columns marked with ★ of above compatible list might not applicable, please be kindly noted this before purchasing this item. The rest columns are bench tested before delivery.