Amewi AMC60 Manual 

34 Welcome to AMEWI The Amewi Trade e.K. is an international import- and wholesale company for R/C models, toys and creative items, located in Borchen near Paderborn, Germany. Our product range includes over 10,000 items. Above all, this includes remote-controlled car, helicopter, boat, and tank models as well as a wide range of accessories and all necessary spare parts. Our sales network includes over 700 specialist dealer and online retailers across Europe. The company AMEWI Trade e.K. is a pure wholesale company. We only sell our products to re ...

55 DISCHARGING OF NIMH/NICD BATTERY Set the discharge current on the left side and the final voltage on the right side. The range of the discharge current is 0.1-2.0A, the range of the final voltage is 0.1-15.0V. Press the START/ENTER button for more than 3 seconds to start the program. You can press the START/ENTER button to change the discharge current, press the START/ENTER button again to save the value, press the BATT TYPE/STOP button to end the discharge process. The end of the discharge process is indicated by an acoustic signal. CHARGE/DIS ...

28 AKKU INNENWIDERSTAND Der Benutzer kann den Innenwiderstand des Akkus überprüfen, einschließlich des Gesamtinnenwiderstands des Akkupacks und des Innenwiderstands jeder einzelnen Zelle. Wählen Sie und drücken Sie dann die Taste "START/ENTER", das Ladegerät wechselt in das Programm für den Innenwiderstand. 1. Prüfen Sie den Gesamt-Innenwiderstand des Akkupacks: Es genügt, den Akku an den Hauptanschluss des Ladegeräts anzuschließen. Wenn Sie den Akku nicht an das Ladegerät anschließen oder der Akku defekt ist, wird die folgende Meldun ...

49 If both numbers are identical, you can start charging. If not, press the BATT TYPE/STOP button to return to the previous screen and check the number of cells in the battery before continuing. This screen shows the real-time status during charging. Press the BATT TYPE/STOP button once to stop charging. FAST CHARGING LITHIUM BATTERY The charging current decreases towards the end of the charging process, a certain CV process is reduced to the earlier charging process. In fact, the charging current reaches 1/5 when the charging process comes to 1/1 ...

53 The screen displays the real-time discharge status. Press the START/ENTER button to change the discharge value. Press the START/ENTER button again to save the set parameter value. Press the BATT TYPE/STOP button to exit the program. NIMH/NICD BATTERY PROGRAM This programme is intended for charging and discharging NiMH/NiCd batteries in connection with RC models. CHARGING NIMH/NICD BATTERY You can press the Inc. or Dec. button to change the parameter value and press the START/ENTER button to save the value. The screen displays the real-time char ...

62 WARNING AND ERROR MESSAGES Incorrect polarity connected. The battery connection is interrupted. The battery connection is wrong. The balance connection is wrong. The internal temperature of the unit goes too high. The external temperature of the unit goes too high. The battery capacity is greater than the maximum capacity set by the user. The charging time is longer than the maximum charging time set by the user. The battery voltage is higher than the maximum voltage set by the user when charging in balance mode. REVERSE POLARITY CONNECTION BAE ...