Broadrack KSR Series Operation & User’s Manual

56 Figure 4-26. OSD Mouse OSD Function Key Description Enter Save ↑ / ↓ Move F1 Go to Main Menu F2 Console off F3 Back Esc Exit Table 4-14. OSD Function Key ...

54 OSD Function Key Description Enter Select →↑←↓ Move F1 Go to Main Menu F2 Console off F3 Back Esc Exit Table 4-11. OSD Function Key Only SUPERVISOR can set up the ACCESS LIST. The first column is the PC name list the following 8 column the access right of each ADMINISTRATOR use OSD MOUSE or Enter key to active / inactive the access right of each port. “X” means to disable access and “O” means to enable access. 4.9.3.6 HOTKEY Figure 4-24. Hotkey OSD Function Key Description Enter Select →↑←↓ Move F1 Go to Main Menu F2 Console off F3 Back Esc Ex ...

26 3.1.4 Replace Longer Bracket Steps (For rack depth 828~1000mm) 1. Release six screws. 2. Take rear bracket out. 2 Input rear long bracket to rear of the rail then adjust rear bracket to fit your cabinet. Tight-up 2~3 screws upon the length you need. One is forbidden. 4. Repeat step 1~3 for the other side. 5. Repeat 3.1.3 step to install console. 3.1.5 Unload Steps 1. Make sure the console is lock. 2. Release three screws in rear of the console. (Both sides) Rear long bracket Original bracket ...

5 1.2.2 KSR-11708-CF / 11716-CF Specification Model name KSR-11708-CF Number of ports 8 Dimension 590.8 x 482.0 x 44.0 mm / 23.3 x 19.0 x 1.7 inches Package Dimension 788 x 564 x 206 mm / 31.0 x 22.2 x 8.1 inches Net Weight 13.0 Kg / 28.7 lbs Gross Weight 20.5 Kg / 45.2 lbs Display Size 17 inches Panel Type Active Matrix TFT LCD Resolution Capabilities Maximum Resolution up to 1280 x 1024 (SXGA) Pixel Pitch Supports 0.264 mm x 0.264 mm Viewing Angle (CR>10) Right-Left View 170°(Typ) Up-Down View 160°(Typ) Contrast Ratio 1000:1 Brightness White 250 cd/m² (Center 1 poi ...

53 Figure 4-22. User Security OSD Function Key Description Enter Enter user name →↑←↓ Move F1 Go to Main Menu F2 Console off F3 Back Esc Exit Table 4-10. OSD Function Key Press “ENTER” key to get USERS list. The left column “S” means SUPERVISOR and “1”, “2”,“3”,…., “8” mean ADMINISTRATOR. The maximum NAME is eight characters maximum (A~Z and 0~9) and PASSWORD is eight characters maximum (A~Z and 0~9). 4.9.3.5 ACCESS LIST Figure 4-23. Access List ...

49 4.9.2 Port Name Figure 4-17. Port Name OSD Function Key Description F1 Go to Main Menu F2 CONSOLE OFF F3 Previous Menu Enter Switch to Selected Port ↑ / ↓ Move Select PgUp Previous Bank PgDn Next bank Esc Quit 1 Show port 01 ~ 08 2 Show port 09 ~ 16 3 Show port 17 ~ 24 4 Show port 25 ~ 32 Table 4-6. OSD Function Key CONSOLE OFF – logout so the next person needs to enter user name and password in order to do operation on this KVM system USER: There are two type of user SUPERVISOR and USER. SUPERVISOR can setup the change the OSD settings at Main Menu. USER can d ...

53 Figure 4-22. User Security OSD Function Key Description Enter Enter user name →↑←↓ Move F1 Go to Main Menu F2 Console off F3 Back Esc Exit Table 4-10. OSD Function Key Press “ENTER” key to get USERS list. The left column “S” means SUPERVISOR and “1”, “2”,“3”,…., “8” mean ADMINISTRATOR. The maximum NAME is eight characters maximum (A~Z and 0~9) and PASSWORD is eight characters maximum (A~Z and 0~9). 4.9.3.5 ACCESS LIST Figure 4-23. Access List ...