Costway 202392 Manual 

F Umbrella Holder G Sliding Lock H Upper Bracket I Joint J Main Frame Tube K Right Weight Stabilizer K1 Left Weight Stabilizer L Leg Bracket M Beverage Holder N Rear Wheel O Anti-Splay Wire P Lower Bracket Q Front Wheel R 2 Holes Leg Frame S 3 Holes Leg Frame T Seat Fixed Bar U Right Wheel Locking Mechanism U1 Left Wheel Locking Mechanism V Footbrake W Seat X Basket Warning: For your own safety,please read and understand these warnings and keep this user guide for future reference. Always make sure the cart is fully extended and locked before use. Always make sure the cart is folded and locked properly before lifting or transporting. Do not run while using this product. Do not use accessories other than those designed for use with your carts. Keep all packing materials away from children and recycle where possible or where required by law. Warning:Keep hands and fingers away from moving or sliding parts! Always keep control of the buggy - Do not let it run down hills without full control. MAINTENANCE To clean, wipe cart with a soft,dry cloth. Car polish may be used to maintain finish. Lubricate moving parts every 6 months. 202392

front wheel, then fold until the pin inserts in the hole as Fig.8 and 9. Move the slide lock downside and lock to upper bracket as Fig.2. Lift the handle to level position as Fig.1. Fig.1 Fig.12 Fig.14 Adjustable handle with 4 positions height as Fig.13. Press the red button and adjust the slide lock to required handle height as Fig.12. Fig.9 Fig.7 Fig.4 Fig.5 Fig.10 Press the button on the wheel lock mechanism to assembly rear wheel as Fig.3. Fig.11 shows the folded position. Assembly the seat as Fig.6. Fig.6 Fig.11 Move the slide lock up to release the handle as Fig.10. Assembly front wheel set into the lower frame by 1pc M6*40mm screw and nut as Fig.4,then rotate until the pin inserts in the hole as Fig.5. Umbrella Holder Assembly To Put In Use: Simply attach the umbrella holder onto the cart in fig. 15. Foot Brake Mechanism Slide Lock Mechanism Folding Steps Assembly Details Pin Hole hole button Fig.15 Fig.8 Release the seat as Fig.7. Push on the brake pedal to stop the rear wheel and pull off to release as Fig.14.

1.If during use, you find the cart veers to the right or left please see the instructions below to correct this problem.(Fig.1) 2.If the cart veers to the left, face the front wheel of the cart and use the Allen wrench provided to screw the right bolt counterclockwise or the left bolt clockwise until the front wheel is centered between the front 3.If the cart veers to the right, face the front wheel of the cart and use the Allen wrench provided to screw the left bolt counterclockwise or the right bolt clockwise until the front wheel is centered between the front fork.(Fig.3) Left Right Fig .1 Fig .2 Fig .3 Left Left Right Right