Copernicus Tech Tub TEC600 Assembly Manual

Please Recycle Ÿ This product is meant to be assembled by an adult. Ÿ In its unassembled state, small parts present a hazard. Ÿ To be used under direct supervision of an adult. WARNING TEC600 Don’t throw these instructions away! Positioning template printed inside! Assembly Guide TEC600_2017_A Check out our other products online at www.copernicused.com For assistance, please contact us: 1-800-267-8494 Email [email protected] Have your packing slip ready for reference ® Tech Tub

Frame Dear Educator, ® Thank you for purchasing one of our products. I hope that the Tech Tub is useful in your classroom. If you have any questions, concerns, or ideas please contact us by telephone at 1-800-267-8494 or email at [email protected]. Enjoy using your new product and happy teaching. Jim Phillips Chief Cook and Bottle Washer ® Tech Tub We do not inherit the earth from our ancestors, we borrow it from our children. NORTH AMERICAN PROVERB Change is the end result of all true learning. LEO BUSCAGLIA What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others. PERICLES Education is the most powerful weapon which you can use to change the world. NELSON MANDELA 2 Assembly Guide TEC600_2017_A Check out our other products online at www.copernicused.com For assistance, please contact us: 1-800-267-8494 Email [email protected] Have your packing slip ready for reference TEC600 Life Tub and Lid Warranty Time To validate your warranty, submit the ON-LINE form at www.copernicused.com Enter a draw to win a Copernicus Product for your classroom at the same time! Validate Your Warranty Component Warranty 1 Year Frame

3 Warning! Hazard Risks! This product is to be used under the supervision of an adult. Indoor Use Only This product is intended for indoor use only. To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The internal components are not sealed from the environment. Read your power strip electrical specifications. Only plug in devices that are approved for use with this power strip. Connect the supplied power strip directly to a wall outlet. Do not connect to another power strip or use an extension cord. Unplug when not in use. Do not leave this product plugged in for more than 72 consecutive hours. Turn off power strip before unplugging. Power Strip Specifications Do not install or use the electrical components of this unit during a lightning storm. Electrical Shock In its unassembled state, this product contains parts that can be hazardous to small children. This product should be assembled by an adult. Small Parts Ensure that any cables extending across the floor to your product are properly bundled and marked to avoid tripping or falling which may lead to personal injury. Cable Trip Hazard Climb Hazard Do not climb on, hang from or suspend objects from any components of your product unless otherwise specified. Read the electrical specifications of any electronic equipment you are using with your Copernicus products. Failure to read these specifications and follow their instructions could result in damage to your equipment or personal injury. Electronic Equipment Adult Supervision Please read the warnings below for important safety information regarding your product. Failure to read these warnings or to follow the instructions below could result in personal injury or damage to your product that could void your warranty.

Lid (1) Tub (1) Locking Pin (1) Padlock (2) Locking Block (1) Cable Hook (2) Spacer (2) Cable Management Pocket (1) Divider (6) Power Strip (1) Power Strip Bracket (2) Rail (2) Items not shown: Bottom Foam Pad (1) Padlock Keys (6) 4 TEC600 ® Tech Tub

Before beginning, you should have: Additional tools required: Adjustable wrench x2 OR 11mm Wrench x2 ® Tech Tub x1 Divider x6 (23229) Locking Block x1 (31078) Locking Pin x1 (31079) Padlock x2 Power Strip x1 (25515) M4 x 14mm Carriage Screw x4 C M4 Wing Nut x8 A Hook & Loop Straps x6 Key x6 M6 x 70mm Screw x2 G M6 Lock Nut x2 M6 Washer x6 Power Strip Bracket x2 (232281) Cable Hook x2 Allen Key 4mm 1x M4 Flat Washer x4 D E F M4 Lock Washer x8 B 5 TEC600 In Box 1 Hardware Actual Size Contents - Box 1 Foam x1

6 TEC600 This symbol denotes a 2- or 3- Person Task. For safety, please ensure that there are the suggested number of people working on steps displaying this symbol. Watch for this symbol throughout the Assembly Guide. Wherever you see it, pay close attention. The symbol denotes a step needing extra attention to ensure it is done correctly. The star symbol highlights an advisory note. Watch for These Helpful Symbols Before You Begin As You Assemble the Unit Lay out and identify all of the included parts. The hardware has been packed according to step. Read the assembly guide over once to familiarize yourself with them. Please note that in its unassembled state, this product contains parts that can be hazardous to small children. This product should be assembled by an adult. Follow the steps in sequence. Before beginning each step, find the part(s) that you need for that step. Pay attention to the labels on the parts; they are there to help direct you at certain stages. The title of each step states what you will be doing. Review the text and the pictures as you build the unit. ? ? ? 2-Person Task 3-Person Task Tips for Assembly Customer Service - FAQ’s For missing parts and other issues regarding this product: Please call Copernicus Customer Service, where we will be happy to help. 1-800-267-8494. Monday - Friday 8:30am - 4:30 pm EST. OR Email our Tech Support Service at [email protected] Need Tech Support? Have a Question? Email our Tech Support Service www.copernicused.com Check out some of our other great products!

Power Strip x1 C 2 You will need: (Not to Scale) Actual Size: Power Strip Bracket x2 Install Carriage Bolts on Power Strip and Mount to Power Strip Brackets 1 You will need: (Not to Scale) Actual Size: ® Tech Tub x1 Cable Hook x2 M4 Wing Nut x4 A Install Cable Hooks A A Tighten fully Note orientation of cable hooks 1 M4 x 14mm Carriage Screw x4 C M4 Flat Washer x4 D 2 D B A B B M4 Lock Washer x4 B Hold bracket in place while tightening hardware. Tighten fully. Keep your power strip upside down as shown. This will make the assembly easier! Power strip cord end Pay close attention to orientation of power strip. 7 M4 Lock Washer x4 B M4 Wing Nut x4 A

3 You will need: (Not to Scale) Assemble Power Strip on Divider 1 2 Actual Size: Divider x1 Make sure snaps (x4) are fully connected Bracket hooks fit into recess. Do not hook brackets below second rail. Install Power Strip Run power strip cable out of the bottom back hole. Use the 5th slot when positioning your power strip. Make sure divider tab is pushed down fully. Pull power strip cable out of the Tech Tub® completely. This will make the installation of the power strip easier! 8 4

Wrap Power Strip Cable 6 Note: Padlock will not lock without key 1 2 Lock Lid with Padlock You will need: (Not to Scale) Padlock x1 Plug cable directly into wall outlet. DO NOT PLUG THIS POWER STRIP INTO ANOTHER POWER STRIP. Install Dividers 5 You will need: (Not to Scale) Divider x5 Make sure divider tabs are pushed down fully. Use your devices to setup the spacing in between your dividers. Using a smaller storage space for your device will minimize your device’s movement during transport. Don’t forget to leave extra room if you have a case! 9 Small or No Case 1 Groove Between Dividers Large Case 2 Grooves Between Dividers 7

Use Template and Drill Holes into Surface 8 You will need: (Not to Scale) 9 You will need: (Not to Scale) Actual Size: Locking Block x1 M6 x 70mm x2 G M6 Lock Nut x2 F OPTIONAL: Positioning Template (found at back of this guide) x1 Allen Key 4mm x1 ® Follow Steps 8 to 10 to install the Tech Tub Locking Block and Locking Pin System Mount Locking Block Drilled holes from Step 6 G E F Underside Label facing upwards E Table or Countertop Section View F G E Washer goes INSIDE tube E Washer goes UNDER tube E E Use positioning template found at back of these Assembly Instructions Use 1/4” or 6mm drill bit Maximum thickness of surface is 2-1/2” (63mm) Table or Countertop Use tape to secure the positioning template This system allows you to lock your Tech Tub® to a table or countertop. This is a really good idea if you leave your devices out in the open or your room doesn’t lock. Once the Tech Tub® is secured in place you can lock the tub lid to secure your devices. 10 E M6 Washer x6

Block and Locking Pin System TEC600 - Version A - Released May 5, 2017 - Copernicus Educational Products Inc. You will need: (Not to Scale) Lock the Tech Tub with Locking Pin ® 10 Locking Pin x1 1 2 3 4 Secure Locking Pin with Padlock on other side. Key x3 11 Padlock x1 Push Tech Tub onto Locking Block ® Push Tech Tub all the way back until the ® Locking Block is completely in channel. Slide Locking Pin through hole on Tech Tub® OPTIONAL: ® Follow Steps 8 to 10 to install the Tech Tub Locking Block and Locking Pin System

Cable Management Charging port of device should be facing upwards or near the top. 1 Arrange your Tech Tub with all of your devices and adapters. ® 2 Start with the device at the back. Plug cable into power adapter and first device. Insert cable into aligned slot Make sure it snaps into place. Run cable through side recess 12

Cable Management Store excess cable into Cable Management Pocket. 13 1 Repeat Steps 1-3 for the remaining devices. 5 Repeat Steps 1-3 for the second device. 14 Once you have your cables set up, close the lid of your Cable Management Pocket 13

Tips for Use Device Management Keeping track of your devices can be made even easier by creating a sign-out program. There are many automated software solutions available that make setting up and running a device check-out program very easy. Here is a list of some companies and their products: ® ResourceMate - www.resourcemate.com Neuton Data Systems - www.neuton.net IntelliScanner - www.intelliscanner.com Does your school already use an automated system to keep track of books? You could use this system to also keep track of your devices! Use a barcode and scanner for identifying your devices. ® Carrying your Tech Tub ® Use the Handles along the sides of the Tech Tub for easy lifting and carrying. Handle Handle Handle Handle 14

Hinge Side Snap Side Drill here Drill here ® Snap Side of Tech Tub Hinge Side of Tech Tub Leave a minimum of 15-1/2” (395mm) of space from Locking Block Leave a minimum of 15-1/2” (395mm) of space from Locking Block Leave a minimum of 11” (280mm) of space from Locking Block Leave a minimum of 4” (102mm) of space from Locking Block 15 Mounting Template ® Tech Tub