Copernicus BTHC2 Assembly Manual

Please Recycle Chart Caddy Center Premium Assembly Guide BTHC2_2013_A Check out our other products online at www.copernicused.com ? This product is meant to be assembled by an adult. ? In its unassembled state, small parts present a hazard. ? To be used under direct supervision of an adult. WARNING For assistance, please contact us: 1-800-267-8494 Email [email protected] Have your packing slip ready for reference Don’t forget to check out our tips for your whiteboard at: www.copernicused.com Page Paw (2) Not Shown Loop Hook (2) Front Frame With Whiteboard (1) Ultra Safe Book Ledge (1) #PABL30 2” Twin Wheel Caster with Brake (4) Book Display Rack (1) #31041 Needs Assembly Telescoping Arms (left & right) (1 each) Open Tub (4) Chart Caddy (10) Pencil Basket (1) Bottom Rack (2) Hidden Hang Tags (100) Not Shown Knob (2) “S” Hook (2) BTHC2 BTHC3 Chart Caddy Stretcher (1) Short Bend Arm (2) Back Frame (1) Long Bend Arm (2) Bottom Stretcher (1)

Bottom Whiteboard Stretcher 1x F M6 Acorn Nut 10x Contents - Box 1 M6x35mm Bolt 8x Allen Key (Not to Scale) 1x Before beginning, you should have: Additional tools required: Rubber Mallet Contents - Box 2 Pencil Basket (#1607) 1x Book Display Rack (#31041) needs assembly 1x Open Tub 4x (CC4068) 10 lbs Weight Limit M6 Lock Washer 22x M6x45mm Bolt 4x Chart Caddy Center - Premium Parts Front Frame with Whiteboard 1x Back Frame 1x Long Bend Arm 2x Short Bend Arm 2x 2” Twin Wheel Caster with brake 4x Chart Caddy Stretcher 1x Knob 2x M6x15mm Bolt 10x M6x20mm Bolt 8x Bottom Rack 2x Ultra Safe Book Ledge 1x (PABL30) Loop Hook 2x “S” Hook 2x Page Paw 2x A B C D E M6 Lock Nut 8x G BTHC2 Hardware Actual Size Chart Caddy 10x Hang Tags 100x Telescoping Arms 1x Right 1x Left M6 Nut 4x H

l This symbol denotes a 2 Person Task. For safety, please ensure that there are two people working on steps displaying this symbol l Watch for this symbol throughout the Assembly Instructions. Wherever you see it, pay close attention. The symbol denotes a step needing extra attention to ensure it is done correctly. l The Star symbol highlights an advisory note Tips for Assembly - Using this Manual 2 Person Watch for These Helpful Symbols Before You Begin As You Assemble the Unit Layout and identify all of the included parts l The hardware has been packed by step l Read the assembly instructions over once to familiarize yourself with them l Please note that in its unassembled state, this product contains parts that can be a hazard l to small children; it should be assembled by an adult. l Follow the steps in sequence l Before beginning each step, find the part(s) that you need for that step l Pay attention to the labeling on the parts, they are there to help direct you at certain stages l The title of each step states what you will be doing. Review the text and the pictures as you build the unit. After Assembly; Before Use l Remove the plastic film from the Whiteboard before writing on it To validate your warranty submit the ON-LINE form at www.copernicused.com Validate Your Warranty On-Line Don’t forget to check out our tips for your whiteboard at: www.copernicused.com Life Time Parts Warranty Life Time Frame Warranty

1 Secure Whiteboard in Place You will need: (Not to Scale) Actual Size: 2 Install Short & Long Bend Arms You will need: (Not to Scale) Actual Size: Front Frame with Whiteboard 1x Short Bend Arm 2x M6x35mm Bolt x 2 M6 Lock Washer x 2 Long Bend Arm 2x H E D M6x45mm Bolt x 4 M6 Lock Washer x 4 M6 Nut x 4 C E For easy assembly build the unit on its side D E H 1 2 E C Bottom Whiteboard Stretcher 1x

3 Install Back Frame You will need: (Not to Scale) Actual Size: 4 You will need: (Not to Scale) Actual Size: Back Frame 1x M6 Lock Washer x 4 M6x35mm Bolt x 4 2” Twin Wheel Caster with Brake 4x C E C E Install Casters Press Casters firmly into the Base: ? Casters will click into place ? If necessary, tap the caster in using a rubber mallet.

5 You will need: (Not to Scale) Actual Size: 6 You will need: (Not to Scale) Actual Size: Chart Caddy Stretcher 1x M6x35mm Bolt x 2 M6 Lock Washer x 2 Telescoping Arms (left & right) 1x Knob 2x Install Telescoping Arms & Knobs Note the hooks face the back of unit Tightening the knobs will stop the arms from sliding. Loosen knobs to adjust. C E Install Chart Caddy Stretcher E C C E Note the orientation of bend is toward the front of unit TIGHTEN ALL FASTENERS.

7 Assemble Book Display Rack You will need: (Not to Scale) Actual Size: Rack 1 Rack 2 Rack 3 Rack 4 Rack 5 Top Rack Main Rack A F Tip, work from largest to smallest rack 1 2 3 4 5 M6x15mm Bolt x 10 A M6 Acorn Nut x 10 F Bolt is threaded through the rear of the back frame. Tighten bolts securely. x 10 M6 Lock Washer E E Hook bottom first then bolt.

8 You will need: (Not to Scale) Actual Size: 9 You will need: (Not to Scale) Actual Size: Install Book Display Rack Book Display Rack 1x B G M6x20mm Bolt x 8 M6 Lock Nut x 8 Bottom Rack 2x Install Bottom Racks Top of Rack Bottom of Rack Note wire is on top B G

10 You will need: (Not to Scale) Actual Size: 11 You will need: (Not to Scale) Actual Size: Install Tubs 10 lbs Weight Limit Open Tub 4x Ultra Safe Book Ledge 1x Install Book Ledge Please note that the spring tension is designed to discourage children from unhooking Book Ledge. There are a number of positions to choose from.

12 You will need: (Not to Scale) Actual Size: Install Loop Hook & “S” Hooks Tip, to avoid scratching the frame place an empty hardware bag over the frame. Simply remove when finished. 13 You will need: (Not to Scale) Actual Size: Attach Page Paws, Chary Caddies, & Pencil Basket Loop Hook 2x “S” Hook 2x Chart Caddy 10x Pencil Basket 1x Page Paw 2x Don’t forget to check out our tips for your whiteboard at: www.copernicused.com Don’t forget to peel off your protective film from your whiteboard.

For assistance, please contact us: 1-800-267-8494 Email [email protected] Have your packing slip ready for reference Chart Caddy Center Premium Assembly Guide BTHC2_2013_A Check out our other products online at www.copernicused.com BTHC2 BTHC3 Dear Educator, Thank you for purchasing one of our products. I hope the assembly of your Chart Caddy Center went well. If you have any questions, or concerns, or ideas for how we can improve, please call us at 1-800-267-8494, where someone will be happy to help. Enjoy using your new product, and happy teaching, Quality school are the result of quality teachers going above and beyond the call of duty. VICKI CARUANA In everyone’s life at some time our inner fire goes out. It is then burst into flame by an encounter with another human being. We should all be thankful for those people who rekindle the inner spirit. ALBERT SCHWEITZER My idea of education is to unsettle the minds of the young and inflame their intellects. ROBERT MAYNARD HUTCHINS Nothing has a better effect upon children than praise. SIR PHILLIP SIDNEY Jim Phillips President