Daikin DCM601A51 Operation & User’s Manual

intelligent Touch Manager 76 •• Creating the Schedule for Special Days Set up the schedule only for the 3rd Saturday of every month (special day).  Touch the Special Day Pattern tab on the Schedule Edit screen. 1. Setting up the name of the special day (17) (19) (18) Select Ex1 in (17). Touch the Rename button (18) to display the Name Input dialog. Enter “Working day” for name and touch the OK button to rename the special day. 2. Setting up the operation start/stop times, operation mode, and setpoint Touch the Edit button (19) and set up the event detai ...

intelligent Touch Manager 103 (7) Setpoint Restriction setup field Sets up the setpoint restriction.  Respectively enable or disable the setpoint restrictions for cooling and heating using the combo boxes. Touch the respective Modify buttons and enter the maximum and minimum values in the Numerical Input dialog that appears.  The range of values you can enter is the same as that for the Setpoint (2) but the entered values should be such that they do not invert the upper and lower limits. •• The Setpoint Restriction does not apply to the following items; AHU, ...

intelligent Touch Manager 341 [Chiller] Output D3Chiller data items The data is rounded to within the output effective range if it is outside the range. No. Item Collection method Unit Valid output range 1 Operation time of heating (Total) Accumulated operating time (in minutes) of the DIII Chiller in heating mode Minutes 0≤Value≤60 2 Operation time of cooling (Total) Accumulated operating time (in minutes) of the DIII Chiller in cooling mode Minutes 0≤Value≤60 3 Start/Stop count Number of times DIII Chiller has been in operation. Times 0≤Value≤9999 4 ...

intelligent Touch Manager 275 iTM integrator Explanation 12. iTM integrator 12-1 iTM integrator An iTM integrator can control a maximum of five intelligent Touch Managers. In this way, you can monitor, operate, and set up a system with up to 2560 management points from a single screen.  You can also set a manager password to the iTM integrator as in the iTM to restrict unwanted operations by outsiders. Furthermore, similarly to the iTM, you can also remotely operate the iTM integrator from a PC via a network. By connecting the iTM integrator to each iTM, you can ...

intelligent Touch Manager 266 Failure to turn off Tab (Equipment operation management Screen) (2) (3) (4) (5) (6) (8) (7) (1) The sampling period is displayed in (1). The sampling period is a period of 31 days or less, starting from the 1st day of the same month of the last year to today of this month. Set the Data target in (2). Touching the Modify button displays the list of registered areas on the Data Target Setup screen. Select the targets from the screen and touch the OK button.  In the Oper. Rule combo box (3), select an operation rule from those registered ...

intelligent Touch Manager 61 (8) Screensaver Changes the screensaver as well as cancels the screensaver in the event of an error. (9) Hardware Sets up the brightness for the screen as well as the volume for the touch panel tone and buzzer. (10) Touch Panel Calibration Corrects the contact points of the touch panel. (11) Time/DST Sets up the current time and the daylight saving time. (12) Regional Sets up the language to use, date and time format, unit of temperature, icon color, etc. (13) Confirmation Dialog Enables or disables the display of a confirmation dialog ...

intelligent Touch Manager 123 2. Select the destination area (for example, 1F North) on the Area Move screen and touch the OK button. 1F North 1F South Aisle Lighting A Lavatory Building A Top All Indoor Ventilator Fig. 6 Office Meeting Room Room A Room B 3. The moved area (for example, Meeting Room) is displayed under the area selected in step 2 (for example, 1F North). Top, All and areas immediately under All cannot be moved. You cannot move an area into these areas either. NOTE ...

intelligent Touch Manager 245 •• Setting up the Actual Energy Consumption (34) To set up the actual energy consumption, touch the Modify button (34) to display the Actual Energy Consumption Setup screen. (35) (37) (38) (36) (39) (40) Register the actual energy consumption for the Energy Group selected in the Energy budget/ actual management screen. In the Energy Type combo box (35), select the energy type for which to enter the actual energy consumption from Power, Gas and Water. You can select from the energy types included in the selected Energy Group. By sw ...