dji 1345s Quick Start Manual

桨，全新设计提高飞行可靠性，确保飞行安全。 相关物品 弹片 快拆式螺旋桨 M3×5.5 螺丝 底座 1 卡勾 螺旋桨安全使用注意事项 1.  螺旋桨安装方向有区分。务必严格按照安装 步骤，正确安装螺旋桨至相应电机，否则将 导致飞行器不能正常飞行。安装、拆卸过程 请谨慎小心，避免因用力过度而损坏螺旋桨。 2.  螺旋桨为易耗品，每次安装前请检查桨帽内 侧卡勾以及底座是否磨损。如果凭目测不能 判断磨损情况，请按照安装步骤4 提及的方 法确认螺旋桨是否磨损。若发现严重磨损请 更换新桨或底座。 manuals and user guides at all-guides.co

桨的实际磨损情况来决定是否需要更换新桨、 弹片或底座。 6.  请妥善保存螺旋桨，以防破损。 安  装 请自备适用于M3×5.5 螺丝的扳手，并按照以 下步骤安装快拆式螺旋桨到Inspire 1。 1.  将弹片、带白点的底座、电机上的安装孔对齐， 安装到银色电机轴的电机上，拧紧螺丝。 manuals and user guides at all-guides.co

4.  安装完成后请务必手动确认四只螺旋桨均被 锁紧：一只手握紧电机，另一只手抓住桨叶 靠近电机位置反向旋转，确保螺旋桨不会松 脱。若稍用力螺旋桨即会松脱，说明螺旋桨 与底座磨损严重，请更换新的螺旋桨和底座， 否则将有很大的安全隐患。 拆  卸 用力按压桨帽到底，然后沿螺旋桨所示解锁方 向 旋转螺旋桨，即可拆卸。 本说明如有更新，恕不另行通知。 您可以在DJI官方网站查询最新版本安装说明 http://www.dji.com/cn/product/inspire-1 DJI 一直努力为用户提供更好的说明书。如果您对说明书有任何疑问 或建议，请通过以下电子邮箱联系我们：[email protected]。 manuals and user guides at all-guides.co

Quick Start Guide manuals and user guides at all-guides.co

propeller set for the Inspire 1, which enhances reliability during flight. Parts 1 Securing Spring Quick-Release Propeller pair M3×5.5 Screw Mounting Plate Propeller Safety 1.  Always be sure to install the propellers onto the correct motors, as indicated in this guide. Rotation indicators are found on both the motors and propellers, ensuring that the correct orientation can be clearly determined. Be careful when installing and removing the propellers. 2. The propeller set may show wear after continuous use. Inspect the hooks inside the propeller nut and mounting plate for wear, as shown below. If you have trouble identifying signs of wear, refer to Step 4 of the Installation section for more information. Be sure to replace the propeller and the mounting plate if they have become worn. Hook manuals and user guides at all-guides.co

mounting plates (without a white dot) with the holes on the motors with black axes. Insert the M3×5.5 screws and tighten to secure. Be sure that the securing spring is facing upward, as shown below. 2 3.  Ensure that the mounting plate and securing spring are firmly attached to the motor before every flight. 4.  Propellers should never be used after they have been involved in a crash or collision. If such an event occurs, replace the propellers before flying again. 5. The propellers, securing springs, and mounting plates have an approximate lifespan of 200 flights. Inspect them regularly to determine if they should be replaced sooner. 6.  Always follow the prescribed storage procedures to avoid damaging the propellers. Installation Assembly requires a M3×5.5 compatible wrench. Follow the steps below to install the 1345s Quick- Release Propellers on the Inspire 1. 1. Align the holes of the securing springs and the mounting plates (with a white dot) with the holes on the motors with gray axes. Insert the M3×5.5 screws and tighten to secure. Be sure that the securing spring is facing upward, as shown below. White dot Grey axes Black axes Without white dot manuals and user guides at all-guides.co

mounting plates that have a white dot, and install the propellers without a white dot onto the mounting plates that do not have a white dot. Align the part, labeled A in the diagram below, with the upper side of the securing spring, labeled B, then press the propeller down onto the mounting plate and rotate in the lock direction until secure. White dot White dot Without white dot Without white dot Check the M3×5.5 screws and tighten if necessary. manuals and user guides at all-guides.co

4. Installation is complete. Remember to always match the axis colors and direction indicators, thus ensuring that the propellers are properly attached and secured. To ensure that the propellers have been properly secured, hold the motor in place with one hand and use your other hand to try to rotate the propeller in the unlock direction without pressing down. If the propeller can be removed this way, the propeller and/or the mounting plate have become worn and should be replaced before flying the Inspire 1 again. Removal Press the propeller down firmly and, while doing so, rotate the propeller in the unlock direction until it can be easily removed. The content is subject to change. Download the latest version from http://www.dji.com/product/inspire-1 If you have any questions about this document, please contact DJI by sending a message to [email protected]. manuals and user guides at all-guides.co