DIR Chale Instruction Manual

Please put the operation manual in the place easy for you to read and you can read it at any time. Product Information Part Instruction 1 2 3 Control Panel Cautions Operation Order Assembly Instructions 9 12 14 Modes-Application & Reference Work State 10

Product Code: H182W/P02W Chale hair processor features the infrared temperature test module to test hair temperature. Our product can test temperature of hair instantly and precisely without damaging hair.

defects in material and/or workmanship attributable to manufacture for one year from date of buyer′s receipt of product. Damage resulting from improper handling after merchandise is received, or from exposure to weather or extreme atmospheric conditions is not covered by the warranty. For any other information please contact our support team: 66 Rea Street South Birmingham B5 6LB UK ----------------------------- Tel: +44(0)121 6434777 ----------------------------- Email: [email protected] DIR BIRMINGHAM Unit 1 River Road Business Park 33 River Road, Barking Greater London IG11 0DA UK ------------------- ---------- Tel: +44(0)20 8591 9310 --------- -------------------- Email: [email protected] DIR LONDON 24 Woodward Ave. Suite C Queens, NY 11385 USA ------------------- ---------- Tel: +1 (718)628-6668 +1 (800)728-2008 -------- --------------------- Email: [email protected] DIR NEW YORK Konrad-Adenauer-Straße 25 50996 Köln Germany ------------------------------ Tel: + 49 (0) 221 4678 0417 ------------------------------ Email: [email protected] DIR COLOGNE Unit 5 Block E, Riverview Business Park, Nangor Road, Dublin 12 Republic of Ireland ------------------------------ Tel: +353 (01) 429 7969 全国统一热线： +400 865 5603 ------------------------------ Email: [email protected] DIR IRELAND ------------------------------ ------------------------------ DIR CHINA 广东伊众健康科技有限公司 Guangdong Yizhong technology co Ltd 地址： 广东顺德龙江龙峰大道38号 邮箱: [email protected]

Machine Head Control Panel Power Switch Circular Heater Product Name: Chale Product Code: W182 Infrared Heat Sensor Air Outlet Grip Support Lever Heater Refector Guard Net Laser Pointer Inner sliding pipe Pole Pole base Knob

Notice:Make the slot of sliding pipe and the adjusting handle are in the same direction. Base Assembly Instructions

screw of head assembly. Notice: please make sure the machine head towards the longer side of the base.

up and down, set the distance from the rotating point to the head at about 12cm and 12cm to the to the front point of the infrared sensor. The distance between the neck and the support lever is roughly 5cm. Pressing the Infrared Orientation Indicator Key will make the infrared eradicate the centre of the customers head. Infrared heal sensor Laser Pointer 12cm 5cm Air outlet

The chart below shows the various temperature settings. There are 7 levels in total. Level 1 Level 2 Level 3 Level 4 Level 5 Level 6 Level 7 40C 45C 50C 55C 60C 65C 70C 2. Time Digital Display It shows the working time. It can also display the angle if you press the Swing Program Selection Key, it will show the angle from 180 – 40. 3. Temperature Level Key Pressing this key can change the temperature levels. 4. Time Setting Key Pressing this key can change the setting time. Pressing up or down once can lengthen or shorten time by 1 minute. By holding the key you can lengthen or shorten time by 5 minutes. 5. Infrared Orientation Indicator Key The Infrared temperature test position is irradiated for 10 seconds. It can use to be the orientation standard after confrmation. 6. Operation Program Selection Key For diferent requirements, diferent programs are available. During operation time and temperature can be changed at your will. 7. Swing Program Selection Key If you don’t need the infrared convoluting or if you want to swing at diferent angles, you can press this key. If you press this key twice the angle can be adjusted at your will. 8. Start/Stop Key Press this key to start every program. Once you have fnished the treatment please key stop after every cycle. 9. Power Switch The main power switch: Press – to turn on or Press O to turn of. Temperature Level Indicator Light Time Digital Display Temperature Level Key Time Setting Key Infrared Orientation Indicator Key Operation Program Selection Key Operation Program Selection Key Swing Program Selection Key Start/Stop Key Power Switch

If the circular heater is not at the correct position then the hair processor will not perform at is optimum performance. 2. Turn on the Power Switch After one minute of turning on the power, the temperature indicator light and the time digital display will illuminate 3. Select a Program Choose diferent programs according to the customer’s requirements. The program selected will illuminate and the setting time and temperature will also be shown. After starting and during the operation, the time and temperature can be altered. 4. Start/Stop Key After starting, press this key, the circular heater starts rotation and all indicators will illuminate; including the indicator light, power indicator and the selected program light. During operation, press this key, the circular heater will stop heating and rotation immediately. 5. During Operation During operation the time digital display shows the remaining time. The radix point will coruscate at a frequency of one second alternation During operation, the time and temperature can be alternated. Press the Start/Stop key to stop operation, you can change to another program and begin next treatment. 6. Time Up When the treatment time is over, the timer will show as “0” the electronic beep will sound and it will stop heating; however, the circular heater will take a little longer to come to a full stop, after two minutes of cooling time the machine will sound again and the circular heater will stop rotation. 7. Turn of the Power Switch After Finishing Work Operation Order

electric shock. 7. The infrared does not have any bad efects on the human body; however, if any customers feel unwell or any discomfort caused by the temperature, than please stop the machine im- mediately. 8. If the machine causes any malfunction, please contact the technical support team as soon as possible. Do not attempt to repair yourself. 9. If the power cord has any damage, to avoid danger, please contact the technical support team. 10. Please keep children away from the machine at all times when in operation Cautions

heater. Do please keep the machine dry at all times. 1. Please avoid exposing and working the machine at extreme hot, cold or damp conditions. It is best to use this machine between 10c – 25c. Diagram 1 2. Please connect the machine with a sustainable outlet and do not share with other appliances. Diagram 2 Diagram 3 Diagram 4 3. Do not disconnect the power plug by pulling the cable. Hold the plug and then pull. 4. Do not move the machine by pulling the power cord or garbing the circular heater. Diagram 5

Chale can be adjusted freely so it won’t be too close to the customers head or in the way of the user. 2. Swing Selection After turning on the power, press the Swing Program Selection Key to confrm the set temperature and time press this key again and the time display will be alternated to show the rotation angle. 3. The Setting Alteration of Time, Temperature & Angle According to the customers’ hair and the type of lotion, alternate the time, temperature and angle Using the Time Setting Key to alternate the time and using the Temperature Level Adjusting Key to alternate the temperature Using the Time Setting Key to alternate the angle by pressing the keys. Key Key A2 A3 A4 A5 A6 A7 A8 A9 40° 60° 80° 100° 120° 140° 160° 180° 40° 60° 80° 100° 120° 140° 160° 180° How to Set Program at Your Will After you press the Operation Program Selection Key, the standard fxed value can be alternated. Then turn of the power, the newly set value will be saved in memory. 1. Select the program to be reset. 2. Alternate the time setting and temperature. 3. Then press the Operation Program Selection Key and hold for 3 seconds, the electronic chime will sound, the indicator light will illuminate and the optional settings are set. 4. When your hand moves away from Operation Program Selection Key, all the settings will be complete. 5. Restart the power switch and confrm whether the program has been set at your specifcations.

Both the temperature and time in the following table are the value fxed before leaving factory. N.B. 1. Computerised infrared rays can ensure the temperature of customers’ hair is always controlled at the set temperature. 2. After operation is fnished, the circular heater will stop heating up and slow down rotation for 2 minutes. 3. After a program is fnished, the machine will cool down for 2 minutes. Operation Modes Colouring 1 Colouring 2 Perm Treatment Swing Application Time Temperature Angle Temperature Control Way 10 mins 10 mins 10 mins 10 mins 10 mins 50℃ 55℃ 50℃ 55℃ 55℃ Rotation Rotation Rotation Rotation Angle swing Rondom setting Rondom setting Rondom setting Rondom setting Rondom setting Adjust time and temperature to suit to type of dye, quality of hair. Adjust time and temperature to suit to type of dye, quality of hair. It is used for heating perm lotion. Adjust time and temperature to suit to the hair condition. Adjust time and temperature to suit to type of shampoo and quality of customer’s hair. Do partial adjustment when colour- ing and perm. Infrared computer control Operating by programmed time controlling

CONTACT PERSON: CONTACT TELEPHONE: CONTACT ADDRESS: REPAIR ITEM: DATE: MODEL: H010 Serial NO: CONTACT PERSON: CONTACT TELEPHONE: CONTACT ADDRESS: DATE OF PURCHASE: Dear customer, Thank you for using our products. Ensuring you are pleased and assured to use our products, please fill in the GUARANTEE CARD carefully when you buy our products. From the date of purchase, you will have 12 months of free repair after-sales service due to quality problem, but not due to man-made damage. Special attention! When selling the goods, customers and distribulators shall fill in the guarantee card, giving the Serial No, and sales date. After confirmation by both parties, customers will have this free repair after-sales service. GUARANTEE CARD GUARANTEE CARD DATE PROBLEMS CAUSE REPAIR DATE REPAIRMAN SIGNATURE

66 Rea Street South Birmingham B5 6LB UK Sales: +44(0)800 085 3667 Customer Service: +44(0)121 6433877 Fax: +44(0)121 6333291 Email: [email protected] Website: www.dirsalonfurniture.uk Unit 1 River Road Business Park 33 River Road, Barking Greater London IG11 0DA UK Sales: +44(0)20 8591 9310 Fax: +44(0)20 8594 4147 Email: [email protected] Website: www.dirsalonfurniture.uk DIR BIRMINGHAM (HEADQUATERS) DIR LONDON 24 Woodward Ave. Suite C Queens, NY 11385 USA Sales: +1 (718)628-6668 +1 (800)728-2008 Fax: +1 855-628-5168 Email: [email protected] Website: www.dirsalonfurniture.com Konrad-Adenauer-Straße 25 50996 Köln Germany Sales: + 49 (0) 221 / 88888.128 Fax: + 49 (0) 221 / 88888.122 Email: [email protected] Website: www.dirgroup.de DIR NEW YORK DIR COLOGNE DIR IRELAND Unit 5 Block E Riverview Business Park Nangor Road Dublin 12 Republic of Ireland Sales: +353 (01) 429 7969 Email: [email protected] Website: www.dirgroup.ie DIR CHINA 全国统一热线： +400 865 5603 广东顺德龙江龙峰大道38号 邮箱: [email protected] 广东伊众健康科技有限公司 Guangdong Yizhong technology co Ltd 官网：www.dirchina.cn