Yamaha DVD-S559MK2 Owner's Manual
Read Online
Read the Yamaha DVD-S559MK2 Owner's Manual online using the built-in PDF viewer.
Text of the manual
LECTEUR DE DVD
G
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
GEBRUIKSAANWIJZING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
2
Install this unit in a well ventilated, cool, dry, clean
place — away from direct sunlight, heat sources,
vibration, dust, moisture, or cold. In a cabinet,
allow about 2.5cm (1 inch) of free space all
around this unit for adequate ventilation.
3
Locate this unit away from other electrical
appliances, motors, or transformers to avoid
humming sounds.
4
Do not expose this unit to sudden temperature
changes from cold to hot, nor locate this unit in
an environment with high humidity (i.e., a room
with a humidifier) to prevent condensation inside
this unit, which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
5
Avoid installing this unit in a location where
foreign objects may fall onto this unit or where
this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
– Other components, as they may cause damage
and/or discoloration on the surface of this unit.
– Burning objects (i.e., candles), as they may
cause fire, damage to this unit, and/or personal
injury.
– Containers with liquid in them, as they may fall,
spilling the liquid and causing an electrical
shock to the user and/or damage to this unit.
6
Do not cover this unit with a newspaper,
tablecloth, curtain, etc. in order not to obstruct
heat radiation. If the temperature inside this unit
rises, it may cause fire, damage to this unit, and/or
personal injury.
7
Do not plug in this unit to a wall outlet until all
connections are complete.
8
Do not operate this unit upside-down. It may
overheat, possibly causing damage.
9
Do not use excessive force on switches, knobs
and/or cords.
10
When disconnecting the power cord from the
wall outlet, grasp the plug; do not pull the cord.
11
Do not clean this unit with chemical solvents; this
might damage the finish. Use a clean, dry cloth.
12
Use only the voltage specified on this unit. Using
this unit with a higher voltage than specified is
dangerous and may cause fire, damage to this
unit, and/or personal injury. YAMAHA will not be
held responsible for any damage resulting from
use of this unit with a voltage other than as
specified.
13
Do not attempt to modify or fix this unit. Contact
qualified YAMAHA service personnel when any
service is needed. The cabinet should never be
opened for any reason.
14
When not planning to use this unit for long
periods of time (i.e., vacation), disconnect the AC
power plug from the wall outlet.
15
Be sure to read the “Troubleshooting” section on
common operating errors before concluding that
this unit is faulty.
16
Before moving this unit, press STANDBY/ON to
set the unit in standby mode, then disconnect the
AC power plug from the wall outlet.
17
Install this unit near the AC outlet and where the
AC power plug can be reached easily.
LASER SAFETY
This unit employs a laser. Due to possible eye injury,
only a qualified service person should remove the
cover or attempt to service this device.
DANGER
This unit emits visible laser radiation when open.
Avoid direct eye exposure to beam.
When this unit is plugged into a wall outlet, do not
place your eyes close to the opening of the disc tray
and other openings or look inside.
The unit is not disconnected from the AC power
source as long as it is connected to the wall outlet,
even if this unit itself is turned off. This state is called
the standby mode. In this state, this unit is designed
to consume a very small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
LASER
Type
Semiconductor laser GaAlAs
Wave length
650 nm (DVD)
780 nm (VCD/CD)
Output Power
7 mW (DVD)
10 mW (VCD/CD)
Beam divergence
60 degree
Notes about discs/content format.........................3
Cleaning discs..............................................................4
Patent information.....................................................4
Functional Overview
Front panel ..................................................................5
Rear panel....................................................................5
Remote control..........................................................6
Connections
General notes on connections................................7
Audio connections.....................................................7
Digital connection ................................................................7
Analog connection...............................................................7
Video connections .....................................................8
Component video jacks .......................................8
S-video jack ..................................................................8
Composite video jack ...........................................8
SCART terminal .......................................................8
Getting Started
Inserting batteries into the remote control.........9
Using the remote control................................................9
Turning on the power............................................ 10
Setting a TV type and display ............................... 10
Setting a color system for your TV.........................10
Setting an aspect ratio for your TV.........................11
Setting a language preference............................... 11
Setting the OSD Language...........................................11
Setting the audio, subtitle and disc menu
languages (DVD-Video only)......................................12
Disc Operations
Basic playback...........................................................13
General operation...................................................13
Pausing playback.................................................................13
Selecting track/chapter ...................................................13
Searching backward/forward.......................................13
Stopping playback..............................................................13
Selecting the various repeat/shuffle functions....14
Repeat and shuffle.............................................................14
Repeating a section within a chapter/track.........14
Operations for video playback (DVD/VCD/SVCD) ...14
Using the disc menu.........................................................14
Slow motion.........................................................................14
Zooming in............................................................................15
Resuming playback from the last stopped point....15
On-screen display (OSD).............................................15
Special DVD features .............................................16
Playing by title......................................................................16
Camera angle.......................................................................16
Audio........................................................................................17
Subtitles...................................................................................17
Special VCD/SVCD features.................................17
Playback control (PBC)..................................................17
Preview function ................................................................17
Playing data discs (MP3/WMA/JPEG/DivX).......... 18
General operation.............................................................18
Selecting a folder and track/file..................................19
Repeat and shuffle.............................................................19
Special picture disc features..................................19
Preview function ................................................................19
Zooming pictures..............................................................19
Playback with multi-angles............................................20
Scan effect..............................................................................20
Playing MP3 music and JPEG picture
simultaneously .....................................................................20
Special DivX features .............................................20
Interactive menu ................................................................20
Multiple audio and subtitle languages ....................20
General setup menu............................................... 21
Locking/Unlocking the disc for viewing.................21
Dimming the front panel display...............................21
Programming disc tracks (except MP3/WMA/
JPEG/DivX)............................................................................21
OSD language .....................................................................22
Screen saver .........................................................................22
Sleep timer............................................................................22
Auto standby........................................................................23
DivX
®
VOD registration code..................................23
Audio setup menu................................................... 23
Setting the analog output..............................................23
Setting the digital output...............................................24
CD upsampling...................................................................24
Night mode...........................................................................25
Lip synchronization...........................................................25
Video setup menu................................................... 25
TV type....................................................................................26
Setting the TV display.....................................................26
Progressive ............................................................................27
Picture setting......................................................................27
Switching the YUV/RGB................................................28
Preference setup menu.......................................... 28
Audio, subtitle and disc menu....................................28
Restricting playback with parental control..........29
Playback of VR format....................................................29
MP3/JPEG menu.................................................................30
Displaying DivX external subtitle files ...................31
Changing the password..................................................31
PBC (Playback control)..................................................32
Resetting the system........................................................32
Language Codes......................... 33
Troubleshooting ........................ 35
Glossary ...................................... 37
Specifications ............................. 39
Thank you for purchasing this unit. This
Owner’s Manual explains the basic
operation of this unit.
DVD discs must be labeled ALL
regions or Region 2 in order to
play on this unit.
You cannot play discs labeled for
other regions.
– Remote control
– Two batteries (AA, R06, UM-3) for the
remote control
– Audio pin cable
– Video pin cable
– Owner’s Manual
– This unit can play the disc types
associated with the logos shown below.
Do not attempt to load any other type
of disc into this unit. Doing so may
damage this unit.
– This unit can play DVD+R/RW/R DL and
DVD-R/RW/R DL discs recorded in
DVD-Video compatible format.
– This unit can play DVD-RW discs
recorded in VR format (compatible with
CPRM).
– This unit can play the following data
discs (For MP3 and WMA files, the
parenthetic words represent the
compatible sampling rate and bit rate):
– MP3 files recorded on CD-R/RW,
DVD+R/RW and DVD-R/RW
(fs 32, 44.1, 48 kHz / 96
–
320 kbps
(CBR only))
– WMA files recorded on CD-R/RW,
DVD+R/RW and DVD-R/RW
(When in fs 44.1 kHz: 64
–
192 kbps /
When in fs 48 kHz: 128
–
192 kbps
(CBR only))
– JPEG (except Progressive JPEG) files
recorded on CD-R/RW, DVD+R/
RW and DVD-R/RW (compatible
resolution: 3072 x 2048 or less)
– KODAK Picture CD
– FUJICOLOR CD
– DivX Video files recorded on CD-R/
RW, DVD+R/RW and DVD-R/RW
– Official DivX
®
Ultra Certified
product
– Plays all versions of DivX
®
video
(including DivX
®
6) with enhanced
playback of DivX
®
media files and
the DivX
®
Media Format
– ISO 9660 Level1/Level2 for CD-R/RW
– Up to 298 folders per disc and up to
648 files per folder with up to 8
hierarchies
– CD-R/RW, DVD+R/RW/R DL and
DVD-R/RW/R DL cannot be played
unless finalized.
– Only the first session of DVD+R/R DL
and DVD-R/RW/R DL can be played.
– Some discs cannot be played depending
on disc characteristics or recording
conditions.
– Do not use any non-standard shaped
discs (heart-shaped, etc.).
– Do not use discs with tape, seals, or
paste on their surface.
– Do not use discs with many scratches
on their surface.
Region codes
Supplied accessories
Notes about discs/content format
ALL
2
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center
out. Do not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic
spray intended for analog records.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
”DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license.
Cleaning discs
Patent information
This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation,
and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Turns on this unit or sets it to the standby
mode.
2 Disc tray
Loads a disc in the disc tray.
3 OPEN/CLOSE (/)
Opens or closes the disc tray.
4 PROGRESSIVE indicator
Lights up when this unit enters the progressive
mode.
5 Front panel display
Shows the current status of this unit.
6 PLAY (B)
Starts playback.
7 PAUSE (;)
Pauses playback.
8 STOP (9)
Stops playback.
1 AC power cord
Connect to a standard AC outlet.
2 AUDIO OUT (L, R) jacks
Connect to the audio input jacks of your AV
receiver or stereo system.
3 DIGITAL OUT - COAXIAL jack
Connect to the coaxial input jack of your AV
receiver.
4 VIDEO OUT - COMPONENT (Y, PB/CB,
PR/CR) jacks
Connect to the component input jacks of your
AV receiver.
5 VIDEO OUT - S VIDEO jack
Connect to the S-video input jack of your AV
receiver.
6 VIDEO OUT - VIDEO jack
Connect to the composite video input jack of
your AV receiver.
7 AV terminal
Connect to SCART input terminal of your TV.
Caution: Do not touch the inner pins of the jacks on the rear panel of this unit.
Electrostatic discharge may cause permanent damage to this unit.
Front panel
1
2
3
4
5
6 7 8
Rear panel
7
1
2
3
4 5 6
Turns on this unit or sets it to the
standby mode.
2 TOP MENU/RETURN
Displays the top-level disc menu (DVD).
Moves back to the previous menu (DVD*/
VCD).
3 MENU
Accesses the menu of a disc (DVD).
Switches PBC on or off (VCD).
4 1 / 2/3 / 4
Selects an item in the currently displayed
menu. Search or slow playback.
ENTER/OK
Confirms the menu selection.
5 S
Searches backward.*
Moves to the previous chapter or track.
6 STOP (9)
Stops playback.
7 SUBTITLE
Selects the subtitle language.
8 ANGLE
Selects the DVD camera angle.
9 REPEAT
Repeats the chapter, track, title or disc.
Shuffles the chapter or track.
0 A-B
Repeats a specific segment.
q Numeric buttons (0-9)
Selects numbered items in the currently
displayed menu.
w ON SCREEN
Accesses or exits from the on-screen
display (OSD) menu of this unit.
e SETUP
Accesses or exits from the setup menu
of this unit.
r T
Searches forward.*
Moves to the next chapter or track.
t PLAY (B)
Starts playback.
y PAUSE (;)
Pauses playback temporarily.
Frame-by-frame playback.
u AUDIO
Selects the audio language or format.
i ZOOM
Enlarges the video image.
o MUTE
Mutes the audio output. Press again to restore
the audio output to previous volume level.
p SCAN
Previews the content of a track or whole disc
(VCD).
Plays the first 6 seconds or less of each track
(CD).
* Press and hold the button for about two
seconds.
Remote control
MENU
SETUP
ENTER
OK
STOP
ANGLE
A B
PAUSE
PLAY
1
2
3
4
5
6
7
8
0
9
TOP MENU RETURN
ON SCREEN
DVD13
ZOOM
AUDIO
SUBTITLE
REPEAT
SCAN
MUTE
1
2
3
4
7
8
9
0
5
6
q
w
e
r
t
y
u
i
o
p
Be sure to turn off this unit and unplug the
power supply cable, before you make or
change connections.
• Depending on the equipment you wish
to connect, there are various ways to
make connections. Possible connections
are described below.
• Refer to the manuals of your other
components as necessary to make the
best connections.
• Do not connect this unit via your VCR.
The video quality could be distorted by
the copy protection system.
• Do not connect the audio out jack of
this unit to the phono in jack of your
audio system.
Digital connection
This unit has a coaxial digital out jack.
Connect DIGITAL OUT - COAXIAL jack
of this unit to your AV receiver equipped
with Dolby Digital, DTS, or MPEG
decoder using a commercially available
coaxial cable.
You need to set “DIGITAL OUTPUT” to
“ALL” (see “DIGITAL OUTPUT” on
page 24).
Notes:
– If the audio format of the digital output
does not match the capabilities of your
receiver, the receiver produces a distorted
sound or no sound at all. Make sure to
select the appropriate audio format from
the menu screen on the disc.
Pressing AUDIO on the remote control once
or more may change not only the audio
languages but also the audio format. The
selected format appears in the front panel
display for several seconds.
– If you wish to enjoy Dolby Digital, DTS and
MPEG formats, you must connect this unit
to an AV receiver that supports these
formats.
Analog connection
This unit has analog output jacks.
Connect AUDIO OUT (L, R) jacks of this
unit to the corresponding input jacks of
your audio component (such as a stereo
amplifier) using the supplied audio pin
cable.
General notes on connections
Audio connections
COAXIAL
IN
C
AV receiver
Left front
speaker
Right surround
speaker
Center
speaker
Subwoofer
Right front
speaker
Left surround
speaker
Surround
back speaker
This unit
CD/DVD
L
R
L
R
R
L
Right
speaker
Left
speaker
Audio pin cable
(supplied)
This unit
Stereo
amplifier
If your AV receiver has video output jacks,
connect your receiver and then your TV
so that you can use one TV for several
different video sources (LD, VCR, etc.) by
simply switching the input source selector
of your receiver.
This unit has four types of video output
jacks. Use the one that corresponds to the
input jacks of the component to be
connected.
Component video jacks
Component video connections achieve
high fidelity color reproduction than S-
video connections by transmitting video
signals on separate wires for luminance (Y:
green) and chrominance (PB: blue, PR: red).
Connect VIDEO OUT - COMPONENT
(Y, PB/CB, PR/CR) jacks of this unit to
component input jacks of your AV receiver
and then to those of your TV using a
commercially available component cable.
Observe the color of each jack when you
make connections.
If your receiver does not have component
output jacks, you can achieve a better
video image by connecting the component
output jacks of this unit directly to the
component input jacks of your TV.
Note:
– You need to set “COMPONENT” to “YUV”
(see “Switching the YUV/RGB” on
page 28).
S-video jack
S-video connections achieve a clearer
picture than composite video connections
by transmitting video signals on separate
wires for luminance (Y) and chrominance
(C).
Connect VIDEO OUT - S VIDEO jack of
this unit to S-video input jack of your AV
receiver and then to that of your TV using
a commercially available S-video cable.
Composite video jack
Connect VIDEO OUT - VIDEO jack of this
unit to video input jack of your AV
receiver and then to that of your TV using
the supplied video pin cable.
SCART terminal
If your TV has only a terminal for video
input, you can connect the TV directly to
this unit.
Connect AV terminal of this unit to
SCART input terminal of your TV using a
commercially available SCART cable.
Note:
– Ensure that the “TV” indication on SCART
cable is connected to the TV set and “DVD”
indication on SCART cable is connected to
this unit.
Video connections
VIDEO
OUT
VIDEO
IN
COMPONENT
VIDEO OUT
COMPONENT
VIDEO IN
S VIDEO
OUT
S VIDEO
IN
COMPONENT
VIDEO IN
S VIDEO
INPUT
VIDEO
INPUT
Y
PB/CB
PR/CR
PR
Y
PB
PR
Y
PB
S
V
AV receiver
Video pin cable
(supplied)
This unit
Open the battery compartment.
2
Insert the two supplied batteries (AA, R06,
UM-3) following the indications (+/–)
inside the compartment.
3
Close the cover.
Notes:
– Insert batteries correctly according to the
polarity markings (+/–). The batteries
inserted in the opposite direction may leak.
– Replace the exhausted batteries
immediately with new ones to prevent a
leakage.
– Remove the batteries from the
compartment if the remote control is not
used for more than a month.
– If the batteries have leaked, dispose of
them immediately. Avoid touching the
leaked material or letting it come into
contact with clothing, etc. Clean the battery
compartment thoroughly before installing
new batteries.
– Do not use old batteries together with new
ones.
– Do not use different types of batteries (such
as alkaline and manganese batteries)
together. Read the packaging carefully as
these different types of batteries may have
the same shape and color.
– Dispose of the batteries correctly in
accordance with your local regulations.
Using the remote control
Handling the remote control
• Do not spill water or other liquids on
the remote control.
• Do not drop the remote control.
• Do not leave or store the remote
control in the following types of
conditions:
– places of high humidity, such as near a
bath
– places of high temperature, such as near
a heater or stove
– places of extremely low temperature
– dusty places
Step1: Inserting batteries
into the remote control
2
1
3
2
30°
30°
Point the remote control at
the remote control sensor,
within approximately 6 m
(20 feet) from this unit.
Remote control
sensor
Connect the AC power cord to the power
outlet.
2
Turn on your TV and AV receiver.
3
Select the appropriate input source of the
AV receiver connected to this unit. Refer
to the manual supplied with your AV
receiver for details.
4
Turn on this unit.
5
Set the TV to the correct Video IN channel
(e.g. EXT1, EXT2, AV1, AV2, AUDIO/
VIDEO, etc. Refer to the manual supplied
with your TV for details).
➜The front panel display lights up and the
default screen appears on the TV.
Setting a color system for your
TV
This unit is compatible with both NTSC
and PAL video formats. Select the color
system that matches your TV.
1
Press SETUP.
2
Press 2 repeatedly to select “VIDEO
SETUP PAGE”.
3
Press 3 / 4 to highlight [TV TYPE], and
then press 2.
4
Press 3 / 4 to highlight one of the following
options.
PAL
Select this if the connected TV is a PAL
system TV. It will change the video signals
of NTSC discs and output them in PAL
format.
NTSC
Select this if the connected TV is an NTSC
system TV. It will change the video signals
of PAL discs and output them in NTSC
format.
MULTI
Select this if the connected TV is
compatible with both NTSC and PAL
formats (such as a multi-system TV).
The output format will be in accordance
with the video signals of the disc.
5
Select an item, and then press
ENTER/OK to confirm your selection.
Notes:
– Before changing the current TV standard
setting, ensure that your TV supports the
selected TV type.
– If the picture is not displayed properly on
your TV, wait for 15 seconds for this unit to
activate automatic recovery.
Step2: Turning on the power
Step3: Setting a TV type and
display
VIDEO SETUP PAGE
TV TYPE
PAL
TV DISPLAY
NTSC
PROGRESSIVE
MULTI
PICTURE SETTING
COMPONENT
TIPS:
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
CANCEL
OK
CHANGING PAL TO NTSC:
1. ENSURE THAT YOUR TV SUPPORTS
NTSC STANDARD.
2. IF THERE IS A DISTORTED PICTURE
DISPLAYED ON THE TV, WAIT 15
SECONDS FOR AUTO RECOVER.
Setting an aspect ratio for your
TV
You can set the aspect ratio of this unit to
match your TV. If the aspect ratio of your
TV is 4:3, you do not need to change this
setting. If you have a widescreen TV,
change this setting according to the
following procedure.
For details, see “Setting the TV display” on
page 26.
1
Press SETUP.
2
Press 2 repeatedly to select “VIDEO
SETUP PAGE”.
3
Press 3 / 4 to highlight [TV DISPLAY], and
then press 2.
4
Press 3 / 4 to highlight [16:9], and then
press ENTER/OK to confirm the
selection.
You can select your own preferred
language settings.This unit automatically
switches to your preferred language
whenever you load a disc. If the selected
language is not available on the disc, the
default language of the disc will be used
instead. The OSD language in the system
menu remains once selected.
Setting the OSD Language
1
Press SETUP.
2
Press 1 / 2 to select “GENERAL SETUP
PAGE”.
3
Press 3 / 4 to highlight [OSD
LANGUAGE], and then press 2.
4
Press 3 / 4 to select a language, and then
press ENTER/OK to confirm your
selection.
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
4:3 PAN SCAN
PROGRESSIVE
4:3 LETTER BOX
PICTURE SETTING
16:9
COMPONENT
TIPS:
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
Step4: Setting a language
preference
GENERAL SETUP PAGE
DISC LOCK
ENGLISH
DISPLAY DIM
DANSK
PROGRAM
DEUTSCH
OSD LANGUAGE
ESPAÑOL
SCREEN SAVER
FRANÇAIS
SLEEP
ITALIANO
AUTO STANDBY
NEDERLANDS
DIVX(R) VOD CODE
NORSK
Setting the audio, subtitle and
disc menu languages
(DVD-Video only)
1
Press STOP (9) twice, and then press
SETUP.
2
Press 2 repeatedly to select
“PREFERENCE PAGE”.
3
Press 3 / 4 to highlight one of the options
below at a time, and then press 2.
– AUDIO (audio language)
– SUBTITLE (subtitle language)
– DISC MENU (disc menu language)
4
Press 3 / 4 to select a language, and then
press ENTER/OK to confirm your
selection.
If the language you want is not in the
list, select [OTHERS],
and then use the numeric buttons (0-9)
on the remote control to enter the 4-digit
language code (see “Language Codes” on
page 33), and then press ENTER/OK to
confirm the code.
5
Repeat steps 3–4 for other language
settings.
PREFERENCE PAGE
AUDIO
ENGLISH
SUBTITLE
CHINESE (SIMP)
DISC MENU
FRENCH
PARENTAL
SPANISH
VR LIST
PORTUGUESE
MP3/JPEG NAV
POLISH
DIVX SUBTITLE
ITALIAN
PASSWORD
TURKISH
TIPS:
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
– If the inhibition icon (
or X)
appears on the TV screen when a
button is pressed, the function for
that button is not available on the
current disc or at the current time.
– Depending on the DVD or VIDEO
CD disc, some operations may
operate differently or be
restricted.
– Do not push on the disc tray or put
any objects other than discs on the
disc tray. Doing so may cause the
disc player to malfunction.
1
Press STANDBY/ON on the front panel
or
on the remote control to turn on
this unit.
2
Press OPEN/CLOSE (/) on the front
panel to open the disc tray.
3
Place the disc in the disc tray with the
printed side up.
4
Press OPEN/CLOSE (/) again to close
the disc tray.
➜After recognizing the disc, this unit
begins to play back automatically.
• If you press PLAY (B) when the disc
tray is open, the disc tray closes and
playback starts automatically.
Unless stated otherwise, all operations
described here are carried out using the
supplied remote control.
Pausing playback
1
During playback, press PAUSE (;).
➜Playback is paused and the sound is
muted.
2
Press PAUSE (;) again to select the next
picture frame.
3
To resume normal playback, press
PLAY (B).
Selecting track/chapter
• Press S / T or use the numeric
buttons (0-9) to select a track/chapter
number.
• During repeated playback, press S /
T to replay the same track/chapter.
Searching backward/forward
1
Press and hold S / T or press 1 / 2.
2
While searching, press S / T or
1 / 2 repeatedly to select the desired
speed.
3
To resume normal playback, press
PLAY (B).
Notes:
– 1 / 2 key may not be available with some
discs.
– For MP3 and WMA, the search function
allows you to search the track currently
being played.
Stopping playback
• Press STOP (9).
Basic playback
General operation
TIPS:
The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
Repeat and shuffle
• Each time you press REPEAT during
playback, the front panel display changes
as follows:
DVD
➔ RPT ONE (repeat chapter)
➔ RPT TT (repeat title)
➔ SHUFFLE (shuffle)
➔ RPT SHF (shuffle repeat)
➔ RPT OFF (repeat off)
VCD/SVCD/CD
➔ RPT ONE (repeat track)
➔ RPT ALL (repeat disc)
➔ SHUFFLE (shuffle)
➔ RPT SHF (shuffle repeat)
➔ RPT OFF (repeat off)
MP3/WMA/DivX
➔ RPT ONE (repeat track)
➔ RPT FLD (repeat folder)
➔ SHUFFLE (shuffle)
➔ RPT OFF (repeat off)
Note:
– For VCD, repeat playback is not possible
when the PBC mode is selected.
Repeating a section within a
chapter/track
1
While playing a disc, press A-B at the
desired starting point.
2
Press A-B again at the desired end point.
• A and B can only be set within the same
chapter/track.
➜The selected section repeats
continuously.
3
To exit from the sequence, press A-B.
Using the disc menu
Depending on the disc, a menu may appear
on the TV screen once you load the disc.
To select a playback feature or item
• Use 1 / 2/3 / 4 or the numeric buttons
(0-9), and then press ENTER/OK to
start playback.
To access or exit from the menu
• Press MENU.
Slow motion
You can play back in slow motion.
1
Press 3 for reverse slow motion or 4 for
forward slow motion.
2
During slow motion, press 3 / 4
repeatedly to select the desired speed.
3
To resume normal playback, press
PLAY (B).
Note:
– Reverse slow motion is not available for
VCDs and SVCDs.
Selecting the various repeat/
shuffle functions
TIPS:
The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
Operations for video playback
(DVD/VCD/SVCD)
This function allows you to enlarge or
lessen the picture on the TV screen and to
pan through the enlarged picture.
1
During playback, press ZOOM repeatedly
to display the picture at different scales.
• Use 1 / 2/3 / 4 to pan through the
enlarged picture.
➜Playback continues.
2
Press ZOOM repeatedly to return to the
original size.
Resuming playback from the last
stopped point
You can resume playback of the last 10
discs, even if the discs were ejected or the
power of this unit was turned off.
1
Load one of the last 10 discs.
➜“LOADING” appears on the TV screen.
2
Press PLAY (B) while “LOADING” is
displayed on the TV screen.
➜“RESUME PLAY” appears on the TV
screen and the disc is played back from
the last point.
To cancel the resume mode
• When playback is stopped, press
STOP (9) again.
On-screen display (OSD)
The OSD menu shows disc playback
information (e.g., the title or chapter
number, elapsed playing time or audio/
subtitle language). A number of operations
are possible without interrupting disc
playback.
1
During playback, press ON SCREEN.
➜A list of available disc information
appears on the TV screen.
DVD
VCD/SVCD
2
Press 3 / 4 to view the information, and
then press ENTER/OK to access the
selected item.
3
Use the numeric buttons (0-9) to input
the number/time or press 3 / 4 to make a
selection, and then press ENTER/OK to
confirm the selection.
➜Playback changes to the selected time
or to the selected title/chapter/track.
TIPS:
The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
MENU
TITLE
02/14
CHAPTER
02/14
AUDIO
5.1CH
SUBTITLE
ENG
BITRATE 16
TITLE ELAPSED 0:02:25
MENU
TRACK
02/14
DISC TIME
0:49:17
TRACK TIME
0:03:43
REPEAT
OFF
BITRATE 16
TOTAL ELAPSED 0:02:25
Press 3 / 4 to select [TITLE] or
[CHAPTER] (DVD) or [TRACK] (VCD).
2
Press ENTER/OK to confirm the
selection.
3
Select a title, chapter or track number
using the numeric buttons (0-9).
Time search (DVD/VCD)
1
Press 3 / 4 to select [TT TIME] or [CH
TIME] (DVD) or [TRACK TIME] or [DISC
TIME] (VCD).
• [TT TIME] refers to the total time of the
current title, and [CH TIME] refers to
the total time of the current chapter.
2
Press ENTER/OK to confirm the
selection.
3
Enter hours, minutes and seconds from left
to right using the numeric buttons (0-9)
(e.g. 0:34:27).
Audio/Subtitle/Angle (DVD)
You can change [AUDIO], [SUBTITLE] or
[ANGLE] if these functions are available on
the disc you are playing.
1
Press 3 / 4 to select [AUDIO],
[SUBTITLE] or [ANGLE].
2
Press ENTER/OK to confirm the
selection.
3
For Audio and Subtitle:
Press 3 / 4 to highlight your selection, and
then press ENTER/OK.
OR
For Angle:
Select an angle using the numeric
buttons (0-9).
Repeat/Time Display (DVD/VCD)
1
Press 3 / 4 to select [REPEAT] or [TIME
DISP.].
2
Press ENTER/OK to confirm the
selection.
3
Press 3 / 4 to highlight your selection, and
then press ENTER/OK.
Time display (CD)
Each time you press ON SCREEN, the
time display changes as follows:
Playing by title
1
Press MENU.
➜The disc title menu appears on the TV
screen.
2
Use 1 / 2/3 / 4 or the numeric buttons
(0-9) to select a playback option.
3
Press ENTER/OK to confirm your
selection.
Camera angle
• Press ANGLE repeatedly to select the
desired angle.
Special DVD features
TOTAL ELAPSED
TOTAL REMAIN
SINGLE REMAIN
SINGLE ELAPSED
TIPS:
The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
Changing the audio language and/or
format
• Press AUDIO repeatedly to select an
audio language.
Subtitles
• Press SUBTITLE repeatedly to select
a subtitle language.
Playback control (PBC)
For VCD with playback control
(PBC) feature (version 2.0 only)
Press MENU to toggle between “PBC
ON” and “PBC OFF”.
➜If you select “PBC ON”, the disc menu
(if available) appears on the TV screen.
• Use S / T or the numeric
buttons (0-9) to select a playback
option.
• During playback, press TOP
MENU/RETURN to return to the
menu screen.
If you want to skip the index menu
and play back a disc directly from the
beginning,
• Press MENU on the remote control to
turn off PBC.
Preview function
1
Press SCAN.
➜A list appears on the TV screen.
2
Press 3 / 4 to highlight [TRACK DIGEST],
[DISC INTERVAL] or [TRACK
INTERVAL].
TRACK DIGEST
This function minimizes the picture for
every track and displays six at a time on the
screen to help you view the tracks on the
disc.
DISC INTERVAL
This function is used to divide a disc into
six parts at regular intervals, and display
them on one page to help you preview the
entire disc.
TRACK INTERVAL
This function is used to divide a single track
into six parts at regular intervals, and
display them on one page to help you
preview the selected track.
Note:
– You can only select [TRACK INTERVAL]
during playback when PBC is turned off.
3
Press ENTER/OK.
➜Thumbnail pictures appear on the TV
screen.
Special VCD/SVCD features
TIPS:
The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
SELECT DIGEST TYPE:
TRACK DIGEST
DISC INTERVAL
TRACK INTERVAL
Use 1 / 2/3 / 4 to select a track or use the
numeric buttons (0-9) to input the
selected track number next to [SELECT].
5
Press S / T to open the previous or
next page.
6
Press ENTER/OK to confirm the
selection.
To quit the preview function
• Use 1 / 2/3 / 4 to highlight [EXIT] and
press ENTER/OK.
To return to the preview menu
• Use 1 / 2/3 / 4 to highlight [MENU] and
press ENTER/OK.
For CD:
• When playback is stopped, press SCAN.
➜Each track is played for a few seconds.
General operation
1
Load a disc.
• The disc reading time may exceed 30
seconds due to the complexity of the
directory/file configuration.
➜The data disc menu appears on the TV
screen.
2
Playback starts automatically. If not, press
PLAY (B).
During playback, you can:
• Press S / T to select another
track/file in the current folder.
• Press PAUSE (;) to pause playback.
Note:
– It may not be possible to play certain MP3/
WMA/JPEG/DivX discs due to the
configuration and characteristics of the
discs or the recording conditions.
(Example of 6 thumbnails in the display)
TYPE:TITLE
SELECT(01-06):- -
EXIT
MENU
NEXT
TIPS:
The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
Playing data discs (MP3/WMA/
JPEG/DivX)
00:00 00:00
001/020
Piano
Cello
Jazz
Live
Favorite
MP3
MP3
MP3
MP3
Selecting a folder and track/file
1
Press 3 / 4 to select a folder, and then
press ENTER/OK to open the folder.
2
Press 3 / 4 to select a track/file.
3
Press ENTER/OK to confirm your
selection.
➜Playback starts from the selected file to
the end of the folder.
Repeat and shuffle
When the MP3 disc/WMA disc/picture
disc menu is shown on the screen;
• Press REPEAT repeatedly to select a
“Play Mode”.
➜FOLDER: files are played back once.
➜REPEAT ONE: one file is played
repeatedly.
➜REPEAT FOLDER: all files in one folder
are played repeatedly.
➜SHUFFLE: all files in the current folder
are played in random order.
1
Load a picture disc (JPEG, Kodak Picture
CD and Fujicolor CD).
➜For JPEG discs, the picture menu
appears on the TV screen.
➜For Kodak Picture CDs and Fujicolor
CDs, the slideshow begins.
2
Press PLAY (B) to start the slideshow.
Preview function
This function displays the content of the
current folder or the entire disc.
1
Press STOP (9) during playback.
➜12 thumbnail pictures appear on the TV
screen.
2
Press S / T to display the other
pictures on the previous/next page.
3
Use 1 / 2/3 / 4 to highlight one of the
pictures, and then press ENTER/OK to
start playback.
OR
Move the cursor to highlight
on the
bottom of the page to start playback from
the first picture on the current page.
For JPEG discs:
4
Press MENU to return to JPEG disc
menu.
Zooming pictures
1
During playback, press ZOOM repeatedly
to display the picture at different scales.
2
Use 1 / 2/3 / 4 to view the zoomed picture.
Special picture disc features
TIPS:
The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
Playback with multi-angles
• During playback, press 1 / 2/3 / 4 to
rotate the picture on the TV screen.
1: rotates the picture counter-clockwise
2: rotates the picture clockwise
3: flips the picture vertically
4: flips the picture horizontally
Scan effect
• Press ANGLE repeatedly to choose a
scan effect.
➜Various scan effects appear in the top
left corner of the TV screen.
Playing MP3 music and JPEG
picture simultaneously
1
Load a disc that contains both MP3 music
and JPEG picture data.
➜The disc menu appears on the TV
screen.
2
Select an MP3 music track.
3
During MP3 music playback, select a JPEG
picture file from the TV screen, and then
press PLAY (B).
➜The picture files are played back one
after another until the end of the folder.
4
To quit simultaneous playback, press
MENU, and then press STOP (9).
Note:
– Some files cannot be played correctly
depending on disc characteristics or
recording conditions.
DivX files including DMF (DivX
Media Format) features only
Interactive menu
1
Load a disc.
➜The interactive menu appears on the TV
screen.
2
Use 1 / 2/3 / 4 to select a chapter.
3
Press ENTER/OK or PLAY (B) to start
playback of the selected chapter.
To access the interactive menu
• During playback, press MENU.
To return to the data disc menu
screen
• When the interactive menu is displayed,
press STOP (9).
Multiple audio and subtitle
languages
To select an audio language
• During playback, press AUDIO to
switch the audio language recorded on
the contents.
To select a subtitle language
• During playback, press SUBTITLE to
switch or turn on/off the subtitle
language recorded on the contents.
Note:
– For information about external subtitle files,
see “Displaying DivX external subtitle files”
on page 31.
Special DivX features
TIPS:
The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.
Setup is carried out on the TV screen,
enabling you to customize this unit to suit
your own particular requirements.
1
Press SETUP.
2
Press 1 / 2 to select the “General Setup”
icon.
3
Press ENTER/OK to confirm your
selection.
Locking/Unlocking the disc for
viewing
Not all discs are rated or coded by the
manufacturer of the disc. You can prevent
playback of a specific disc by locking the
disc. You can lock up to 40 discs on this
unit.
1
In “GENERAL SETUP PAGE”, press 3 / 4
to highlight [DISC LOCK], and then
press 2.
LOCK
Select this to lock playback of the current
disc. Subsequent access to a locked disc
requires six-digit password.
The default password is “000 000” (see
“Changing the password” on page 31).
UNLOCK
Select this to unlock the disc and allow
future playback.
2
Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
Dimming the front panel display
You can select different levels of
brightness for the front panel display.
1
In “GENERAL SETUP PAGE”, press 3 / 4
to highlight [DISPLAY DIM], and then
press 2.
100%
Select this for full brightness.
70%
Select this for medium brightness.
40%
Select this for dimming display.
2
Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
Programming disc tracks
(except MP3/WMA/JPEG/DivX)
You can play back the contents of a disc in
the desired order by programming the
tracks to be played. You can store up to 20
tracks per disc with a maximum of 10
discs.
1
In “GENERAL SETUP PAGE”, press 3 / 4
to highlight [PROGRAM], and then press 2
to select [INPUT MENU].
2
Press ENTER/OK to confirm your
selection.
➜The input menu appears on the TV
screen.
General setup menu
GENERAL SETUP PAGE
DISC LOCK
DISPLAY DIM
PROGRAM
OSD LANGUAGE
SCREEN SAVER
SLEEP
AUTO STANDBY
DIVX(R) VOD CODE
TIPS:
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
To input your favorite tracks/chapters
3
Use the numeric buttons (0-9) to enter
a valid track/chapter number.
4
Use 1 / 2/3 / 4 to move the cursor to the
next position.
• If the track/chapter number is more
than ten, press T to move to the
next page, and then proceed with
programming.
OR
• Use 1 / 2/3 / 4 to highlight [NEXT] on
the program menu, and then press
ENTER/OK.
5
Repeat steps 3–4 to input another track/
chapter number.
To remove a track
6
Use 1 / 2/3 / 4 to move the cursor to the
track you want to remove.
7
Press ENTER/OK to remove this track
from the program menu.
To start program playback
8
Use 1 / 2/3 / 4 to highlight [START] on the
program menu, and then press
ENTER/OK.
➜Playback starts for the selected tracks in
the programmed sequence.
To exit from program playback
9
Use 1 / 2/3 / 4 to highlight [EXIT] on the
program menu, and then press
ENTER/OK.
OSD language
This menu contains various options for the
on-screen display (OSD) language. For
details, see “Setting the OSD Language” on
page 11.
Screen saver
This function is used to turn on or off the
screen saver.
1
In “GENERAL SETUP PAGE”, press 3 / 4
to highlight [SCREEN SAVER], and then
press 2.
ON
Select this if you wish to turn off the TV
screen when disc playback is stopped or
paused for more than 15 minutes.
OFF
Select this to disable the screen saver
function.
2
Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
Sleep timer
This feature automatically sets this unit to
the standby mode after a certain elapsed
period.
1
In “GENERAL SETUP PAGE”, press 3 / 4
to highlight [SLEEP], and then press 2.
1 04
2 10
3 _ _
4 _ _
5 _ _
6 _ _
7 _ _
8 _ _
9 _ _
10 _ _
PROGRAM: TRACK (01-17)
EXIT
START
NEXT
TIPS:
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
Press 3 / 4 to select a setting.
• You can select from 30, 60, 90, 120 and
150 minutes. Select [OFF] to cancel the
sleep timer function.
3
Press ENTER/OK to confirm your
selection.
Auto standby
This function is used to turn the auto
standby mode on or off when disc playback
is stopped for more than 30 minutes.
1
In “GENERAL SETUP PAGE”, press 3 / 4
to highlight [AUTO STANDBY], and then
press 2.
ON
Select this if you wish to set this unit to the
standby mode automatically when disc
playback is stopped or paused for more
than 30 minutes.
OFF
Select this to disable the auto standby
function.
2
Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
DivX® VOD registration code
Yamaha provides you with a DivX® VOD
(Video On Demand) registration code that
allows you to rent and purchase videos
using the DivX® VOD service.
For more information, visit at
www.divx.com/vod.
1
In “GENERAL SETUP PAGE”, press 3 / 4
to highlight [DIVX(R) VOD CODE], and
then press 2.
➜The registration code appears.
2
Press ENTER/OK to exit.
3
Use the registration code to purchase or
rent the videos from DivX® VOD service
at www.divx.com/vod. Follow the
instructions and download the video onto
a CD-R for playback on this unit.
Notes:
– All the downloaded videos from DivX®
VOD can only be played back on this unit.
– Time search feature is not available during
DivX movie playback.
1
Press SETUP.
2
Press 1 / 2 to select the “Audio Setup”
icon.
3
Press ENTER/OK to confirm your
selection.
Setting the analog output
Set the analog output to match the
playback capability of this unit.
1
In “AUDIO SETUP PAGE”, press 3 / 4 to
highlight [ANALOG OUTPUT], and then
press 2.
TIPS:
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
Audio setup menu
AUDIO SETUP PAGE
ANALOG OUTPUT
DIGITAL AUDIO
CD UPSAMPLING
NIGHT MODE
LIP SYNC
Select this to change channel output to
stereo, which only delivers sound from the
two front speakers.
LT/RT
Select this if this unit is connected to a
Dolby Pro Logic decoder.
VIRTUAL SURR
Select this to virtually reproduce the
surround channels.
2
Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
Setting the digital output
The [DIGITAL AUDIO]options are:
“DIGITAL OUTPUT” and “LPCM
OUTPUT”.
1
In “AUDIO SETUP PAGE”, press 3 / 4 to
highlight [DIGITAL AUDIO], and then
press 2.
2
Press 3 / 4 to highlight an option.
3
Press 2 to enter a submenu.
DIGITAL OUTPUT
Set the digital output according to your
optional audio component connections.
OFF
Select this to turn off the digital output.
ALL
Select this if you have connected the digital
audio output jack to a multi-channel
decoder/receiver.
PCM ONLY
Select this only if your receiver is not
capable of decoding multi-channel audio
signals.
LPCM OUTPUT
Select this if you have connected this unit
to a PCM-compatible receiver via a digital
terminal, such as the coaxial terminal. In
this case, you may need to adjust “LPCM
OUTPUT”.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
48KHz
Select this to play back discs recorded at
the sampling rate of 48 kHz. All 96 kHz
PCM data streams (if available) are
converted to the sampling rate of 48 kHz.
96KHz
Select this to play back discs recorded at
the sampling rate of 96 kHz. If the 96 kHz
disc is copy protected, the digital output is
automatically converted to the sampling
rate of 48 kHz.
4
Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
CD upsampling
This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality. If you activate the
upsampling function, this unit automatically
switches to the stereo mode.
1
In “AUDIO SETUP PAGE”, press 3 / 4 to
highlight [CD UPSAMPLING], and then
press 2.
TIPS:
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
Select this to disable CD-upsampling.
88.2kHz (X2)
Select this to convert the sampling rate of
CDs to twice that of the original.
176.4kHz (X4)
Select this to convert the sampling rate of
CDs to four times that of the original.
2
Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
Note:
– This setting is only valid for the signals
output at the analog jacks.
Night mode
In the night mode, high volume output is
softened and low volume output is brought
upward to an audible level. It is useful when
you watch your favorite action movie
without disturbing others at night.
1
In “AUDIO SETUP PAGE”, press 3 / 4
to highlight [NIGHT MODE], and then
press 2.
ON
Select this to level out the volume. This
feature is only available for movies with the
Dolby Digital mode.
OFF
Select this when you want to enjoy the full
dynamic range of surround sound.
2
Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
Lip synchronization
This feature allows you to delay the sound
output in order to synchronize it with the
video image. This may be necessary when
you use certain LCD monitors or
projectors.
1
In “AUDIO SETUP PAGE”, press 1 / 2
to highlight [LIP SYNC], and then
press 2.
2
Press 1 / 2 to adjust the delay time
(between 00 ms and 200 ms), and then
press ENTER/OK to confirm your
selection.
1
Press SETUP.
2
Press 1 / 2 to select the “Video Setup”
icon.
3
Press ENTER/OK to confirm your
selection.
TIPS:
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
Video setup menu
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
COMPONENT
This menu contains the options for
selecting the color system that matches
your TV. For details, see “Setting a TV type
and display” on page 10.
Setting the TV display
Set the aspect ratio of this unit to match
your TV. The format you select must be
available on the disc. Otherwise, the TV
display setting will not affect the picture
during playback.
1
In “VIDEO SETUP PAGE”, press 3 / 4 to
highlight [TV DISPLAY], and then press 2.
2
Press 3 / 4 to highlight one of the following
options.
4:3 PAN SCAN
Select this if the aspect ratio of your TV is
4:3 and you want both sides of the picture
to be trimmed or formatted to fit your TV
screen.
4:3 LETTER BOX
Select this if the aspect ratio of your TV is
4:3. In this case, a wide picture with black
bands on the upper and lower portions of
the TV screen are displayed.
16:9
Select this if you have a widescreen TV.
3
Select an item, and then press
ENTER/OK to confirm your selection.
The relationship between the setting of
this unit and the TV display
When the aspect ratio of your TV is 4:3:
When the aspect ratio of your TV is 16:9
(widescreen):
*1: If the disc is not assigned to playback
with panscan, it is played with
letterbox.
*2: The side of the picture may be
stretched depending on the TV. In this
case, check the screen size and aspect
ratio of your TV.
TIPS:
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
Setting
Playback
disc
TV display
4:3 PAN
SCAN
4:3 LETTER
BOX
16:9
4:3
16:9
4:3
*1
16:9
16:9
4:3
Setting
Playback
disc
TV display
*2
Press 3 / 4 to select one of the following
options.
BRIGHTNESS
Increase the value to brighten the picture
or vice versa. Zero (0) is the average
brightness setting value.
CONTRAST
Increase the value to sharpen the picture
or vice versa. Zero (0) is the average
contrast setting value.
TINT
Increase the value to darken the picture or
vice versa. Zero (0) is the average tint
setting value.
COLOR
Increase the value to enhance the color in
your picture or vice versa. Zero (0) is the
average color setting value.
5
Press 1 / 2 to adjust the setting that best
suits your personal preference.
6
Repeat steps 4–5 to adjust other color
features.
7
Press ENTER/OK to confirm your
selection.
Switching the YUV/RGB
This setting allows you to toggle the
output of the video signal between RGB
(on SCART) and YUV (Y PB PR).
1
In “VIDEO SETUP PAGE”, press 3 / 4 to
highlight [COMPONENT], and then
press 2.
YUV
Select this for the component video
connection.
RGB
Select this for SCART connection.
2
Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
1
Press STOP (9) twice to stop playback
(if necessary), and then press SETUP.
2
Press 1 / 2 to select the “Preference
Setup” icon.
3
Press ENTER/OK to confirm your
selection.
Audio, subtitle and disc menu
These menus contain various language
options for the audio, subtitles and disc
menus recorded on the DVD-Video. For
details, see “Setting the audio, subtitle and
disc menu languages (DVD-Video only)”
on page 12.
TIPS:
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
Preference setup menu
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
VR LIST
MP3/JPEG NAV
DIVX SUBTITLE
PASSWORD
Restricting playback with
parental control
Some DVDs may have a parental level
assigned to the complete disc or to certain
scenes on the disc. This feature lets you set
a playback limitation level.
The rating levels are from 1 to 8 and are
country dependent. You can prohibit
playback of certain discs that are not
suitable for your children or play certain
discs in alternative scenes.
1
In “PREFERENCE PAGE”, press 3 / 4 to
highlight [PARENTAL], and then press 2.
2
Press 3 / 4 to highlight a rating level for the
inserted disc, and then press ENTER/OK.
• To disable parental controls and have all
discs play, select [8 ADULT].
3
Use the numeric buttons (0-9) to enter
the six-digit password (see “Changing the
password” on page 31).
➜DVDs that are rated above the level you
selected do not play unless you enter
your six-digit password.
Note:
– Some DVDs are not encoded with a rating
though the movie rating may be printed on
the disc cover. The rating level feature does
not work for such discs.
Playback of VR format
There are two ways to play back a disc in
VR (Video Recording) format: ORIGINAL
and PLAY LIST. This feature is not available
with non-VR format discs.
1
In “PREFERENCE PAGE”, press 3 / 4 to
highlight [VR LIST], and then press 2.
ORIGINAL LIST
Select this to play the originally recorded
titles on the disc.
PLAY LIST
Select this to play the edited version of the
disc. This feature is only available when a
play list has been created.
2
Press 3 / 4 to highlight a setting, and then
press ENTER/OK to confirm your
selection.
To play back a disc in VR format
3
Press SETUP to close the setup menu.
4
Press PLAY (B) to begin to play back the
setting you selected.
Previewing VR format
5
During playback, press SCAN.
➜A list appears on the TV screen.
PREFERENCE PAGE
AUDIO
1 KID SAFE
SUBTITLE
2 G
DISC MENU
3 PG
PARENTAL
4 PG 13
VR LIST
5 PGR
MP3/JPEG NAV
6 R
DIVX SUBTITLE
7 NC 17
PASSWORD
8 ADULT
TIPS:
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
SELECT DIGEST TYPE:
TITLE DIGEST
TITLE INTERVAL
Press 3 / 4 to highlight either [TITLE
DIGEST] or [TITLE INTERVAL].
TITLE DIGEST
This function displays thumbnail pictures of
titles on the screen. Up to six thumbnail
pictures per page are displayed.
• In ORIGINAL LIST mode, the originally
recorded titles on the disc are
displayed.
• In PLAY LIST mode, every title in the
play list is displayed.
TITLE INTERVAL
This function is used to divide and display
the contents of each title being played back
in regular intervals, making it easy to
preview the recording. Up to six thumbnail
pictures per page are displayed.
• If the title being played back is short, the
TITLE DIGEST function is performed
instead.
7
Press ENTER/OK to confirm the
selection.
➜Thumbnail pictures appear on the TV
screen.
8
Use 1 / 2/3 / 4 to select a title or use the
numeric buttons (0-9) to input the title
number next to [SELECT].
• Press S / T to access the
previous/next page.
9
Press ENTER/OK to confirm the
selection.
To quit the preview function
• Use 1 / 2/3 / 4 to highlight [EXIT] and
press ENTER/OK.
To return to the preview menu
• Use 1 / 2/3 / 4 to highlight [MENU] and
press ENTER/OK.
MP3/JPEG menu
MP3/JPEG Navigator can be set only if the
disc was recorded with a menu. It allows
you to select different display menus for
easy navigation.
1
In “PREFERENCE PAGE”, press 3 / 4 to
highlight [MP3/JPEG NAV], and then
press 2.
WITHOUT MENU
Select this to display all the files contained
in the MP3/Picture CD.
WITH MENU
Select this to display only the folder menu
of the MP3/Picture CD.
2
Press 3 / 4 to select a setting, and then
press ENTER/OK to confirm your
selection.
(Example of 6 thumbnails in the display)
TYPE:TITLE
SELECT(01-06):- -
EXIT
MENU
NEXT
TIPS:
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
Displaying DivX external subtitle
files
The font sets listed below are available for
DivX external subtitle files. This setting
allows you to see the proper font set on-
screen to match the subtitle file.
1
In “PREFERENCE PAGE”, press 3 / 4 to
highlight [DIVX SUBTITLE], and then
press 2.
2
Press 3 / 4 to highlight one of the following
language groups.
GROUP1:
Albanian (sq), Basque (eu), Catalan (ca),
Danish (da), Dutch (nl), English (en),
Faroese (fo), Finnish (fi), French (fr),
German (de), Icelandic (is), Irish (ga),
Italian (it), Norwegian (no), Portuguese
(pt), Rhaeto-Romanic (rm), Scottish (gd),
Spanish (es), Swedish (sv)
GROUP2:
Albanian (sq), Croatian (hr), Czech (cs),
Hungarian (hu), Polish (pl), Romanian (ro),
Slovak (sk), Slovenian (sl)
GROUP3:
Bulgarian (bg), Byelorussian (be),
Macedonian (mk), Russian (ru), Serbian
(sr), Ukrainian (uk)
GROUP4:
Hebrew (iw), Yiddish (ji)
GROUP5:
Turkish (tr)
3
Select a group, and then press
ENTER/OK to confirm your selection.
Notes:
– Some discs cannot be played depending on
disc characteristics or recording conditions.
– Some external subtitle files may be
displayed incorrectly or not at all.
– For external subtitle files, the following
subtitle format filename extensions are
supported (note that these files are not
shown within the disc navigation menu):
.srt, .sub, .ssa, .smi
– The filename of the movie file has to be
repeated at the beginning of the filename
for the external subtitle file.
– The number of external subtitle files which
can be switched for the same movie file is
limited to a maximum of 10.
Changing the password
The same password is used for both
parental control and disc lock. Enter your
six-digit password when prompted on the
screen. The default password is 000 000.
1
In “PREFERENCE PAGE”, press 3 / 4 to
highlight [PASSWORD], and then press 2
to select [CHANGE].
TIPS:
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
VR LIST
MP3/JPEG NAV
DIVX SUBTITLE
PASSWORD
CHANGE
Press ENTER/OK to enter the
“Password Change Page”.
3
Use the numeric buttons (0-9) to enter
your old six-digit password.
• When doing this for the first time, enter
“000 000”.
• If you forget your old six-digit
password, enter “000 000”.
4
Enter the new six-digit password.
5
Enter the new six-digit password again to
confirm the password.
6
Press ENTER/OK to confirm your new
password.
➜The new six-digit password is now valid.
PBC (Playback control)
You can turn on or off PBC. This feature is
available only on Video CD 2.0 with the
playback control (PBC) feature. For
details, see “Playback control (PBC)” on
page 17.
Resetting the system
Setting the DEFAULT function resets all
options and your personal settings to the
initial factory settings, except your
password for PARENTAL and DISC
LOCK.
1
In “PREFERENCE PAGE”, press 3 / 4 to
highlight [DEFAULT], and then press 2 to
select [RESET].
2
Press ENTER/OK to confirm your
selection.
➜All settings are reset to the initial
factory settings.
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
OK
TIPS:
To return to the previous menu, press 1.
To exit from the menu, press SETUP.
These codes can be used to select other languages. This does not affect the options
in “AUDIO”, “SUBTITLE” or “DISC MENU”.
Abkhazian
6566
German
6869
Afar
6565
Gikuyu; Kikuyu
7573
Afrikaans
6570
Greek,
6976
Albanian
8381
Guarani
7178
Amharic
6577
Gujarati
7185
Arabic
6582
Hausa
7265
Armenian
7289
Hebrew
7269
Assamese
6583
Herero
7290
Avestan
6569
Hindi
7273
Aymara
6589
Hiri Motu
7279
Azerbaijani
6590
Hungarian
7285
Bashkir
6665
Icelandic
7383
Basque
6985
Ido
7379
Belarusian
6669
Indonesian
7368
Bengali
6678
Interlingua (International)
7365
Bihari
6672
Interlingue
7369
Bislama
6673
Inuktitut
7385
Bokmål, Norwegian
7866
Inupiaq
7375
Bosnian
6683
Irish
7165
Breton
6682
Italian
7384
Bulgarian
6671
Japanese
7465
Burmese
7789
Javanese
7486
Castilian, Spanish
6983
Kalaallisut
7576
Catalan
6765
Kannada
7578
Chamorro
6772
Kashmiri
7583
Chechen
6769
Kazakh
7575
Chewa; Chichewa; Nyanja
7889
Khmer
7577
Chichewa; Chewa; Nyanja
7889
Kikuyu; Gikuyu
7573
Chinese
9072
Kinyarwanda
8287
Chuang; Zhuang
9065
Kirghiz
7589
Church Slavic; Slavonic;
6785
Komi
7586
Church Slavonic; Church
6785
Korean
7579
Chuvash
6786
Kuanyama; Kwanyama
7574
Cornish
7587
Kurdish
7585
Corsican
6779
Kwanyama; Kuanyama
7574
Croatian
7282
Lao
7679
Czech
6783
Latin
7665
Danish
6865
Latvian
7686
Dutch
7876
Letzeburgesch;
7666
Dzongkha
6890
Limburgan; Limburger;
7673
English
6978
Limburger; Limburgan;
7673
Esperanto
6979
Limburgish; Limburger;
7673
Estonian
6984
Lingala
7678
Faroese
7079
Lithuanian
7684
Fijian
7074
Luxembourgish;
7666
Finnish
7073
Macedonian
7775
French
7082
Malagasy
7771
Frisian
7089
Malay
7783
Gaelic; Scottish Gaelic
7168
Malayalam
7776
Gallegan
7176
Maltese
7784
Georgian
7565
Manx
7186
These codes can be used to select other languages. This does not affect the options
in “AUDIO”, “SUBTITLE” or “DISC MENU”.
Maori
7773
Sotho, Southem
8384
Marathi
7782
South Ndebele
7882
Marshallese
7772
Spanish; Castilian
6983
Moldavian
7779
Sundanese
8385
Mongolian
7778
Swahili
8387
Nauru
7865
Swati
8383
Navaho, Navajo
7886
Swedish
8386
Navajo; Navaho
7886
Tagalog
8476
Ndebele, North
7868
Tahitian
8489
Ndebele, South
7882
Tajik
8471
Ndonga
7871
Tamil
8465
Nepali
7869
Tatar
8484
Northern Sami
8369
Telugu
8469
North Ndebele
7868
Thai
8472
Norwegian
7879
Tibetan
6679
Norwegian Bokmål; Bokmål,
7866
Tigrinya
8473
Norwegian Nynorsk;
7878
Tonga (Tonga Islands)
8479
Nyanja; Chichewa; Chewa
7889
Tsonga
8483
Nynorsk, Norwegian;
7878
Tswana
8478
Occitan (post 1500); Proven
7967
Turkish
8482
Old Bulgarian; Old Slavonic;
6785
Turkmen
8475
Old Church Slavonic; Old
6785
Twi
8487
Old Slavonic; Church
6785
Uighur
8571
Oriya
7982
Ukrainian
8575
Oromo
7977
Urdu
8582
Ossetian; Ossetic
7983
Uzbek
8590
Ossetic; Ossetian
7983
Vietnamese
8673
Pali
8073
Volapük
8679
Panjabi
8065
Walloon
8765
Persian
7065
Welsh
6789
Polish
8076
Wolof
8779
Portuguese
8084
Xhosa
8872
Provençal; Occitan (post)
7967
Yiddish
8973
Pushto
8083
Yoruba
8979
Quechua
8185
Zhuang; Chuang
9065
Raeto-Romance
8277
Zulu
9085
Romanian
8279
Rundi
8278
Russian
8285
Samoan
8377
Sango
8371
Sanskrit
8365
Sardinian
8367
Scottish Gaelic; Gaelic
7168
Serbian
8382
Shona
8378
Sindhi
8368
Sinhalese
8373
Slovak
8375
Slovenian
8376
Somali
8379
Refer to the chart below when this unit does not function properly. If the problem
you are experiencing is not listed below or if the instruction below does not help,
set this unit to the standby mode, disconnect the power cord, and contact the
nearest authorized YAMAHA dealer or service center.
Problem
Solution
No power
– Connect the AC power cord properly.
– Press STANDBY/ON on the front panel to turn on the power.
No picture
– Refer to the manual supplied with your TV for correct Video In
channel selection. Change the TV channel until you see the DVD
screen.
– Turn on your TV.
– Check that the video signal output setting matches the video
connection (see “Switching the YUV/RGB” on page 28).
No picture or distorted
picture is displayed on the
TV of NTSC system
– The default setting of [TV TYPE] is PAL. Follow the steps below to
change the setting of [TV TYPE] to NTSC;
1. Press OPEN/CLOSE (/) on the front panel or press and hold
STOP (9) on the remote control to open the disc tray.
2. Press 2 on the remote control.
3. Press AUDIO on the remote control.
No picture is displayed
when you do not use
progressive scan
connections (using the
component video jacks)
– Follow the steps below to turn off the progressive scan;
1. Press OPEN/CLOSE (/) on the front panel or press and hold
STOP (9) on the remote control to open the disc tray.
2. Press 1 on the remote control.
3. Press MUTE on the remote control to deactivate progressive scan.
This unit is set to Component/Interlaced video.
Distorted picture
– Occasionally, a small amount of picture distortion may appear
depending on the disc being played back. This is not a malfunction.
Completely distorted
picture or black/white
picture with DVD
– Check that the disc is compatible with this unit (see “Notes about
discs/content format” on page 3).
– Check that the TV Type of this unit is set to match that of the disc
and your TV (see “Setting a color system for your TV” on page 10).
The screen size looks
unnatural, or the caption is
displayed only partially on
the TV monitor or is not
displayed at all
– Check that the TV setting of this unit matches the screen size of your
TV (see “Setting the TV display” on page 26).
– Change the screen size and the aspect ratio of your TV.
No sound or distorted
sound
– Adjust the volume.
– Check that the speakers are connected correctly.
– For MP3/WMA files, check that the sampling rate and bit rate are
compatible with this unit (see “Notes about discs/content format” on
page 3).
No sound and picture
– Check that the RGB/SCART cable is connected to the correct device
(see “Video connections” on page 8).
No audio at digital output
– Check the digital connections.
– If you are playing a DTS source, check that your receiver can decode
DTS and “DIGITAL OUTPUT” is set to “ALL” (see page 24).
– If you are playing an MPEG-2 source, check that your receiver can
decode MPEG-2. Otherwise, make sure “DIGITAL OUTPUT” is set
to “PCM ONLY” (see page 24).
– Check that the audio format of the selected audio language matches
your receiver capabilities.
Disc does not play
– The CD-R/RW, DVD+R/RW/R DL and DVD-R/RW/R DL must be
finalized.
– Check that the disc label is facing up.
– Check that the disc is defective by trying another disc.
– If you have recorded a JPEG, MP3 or WMA disc yourself, check that
your disc contains at least 10 JPEG picture files or 5 MP3/WMA music
tracks.
– For MP3/WMA files, check that the sampling rate and bit rate are
compatible. For JPEG files, check that the resolution is compatible
(see “Notes about discs/content format” on page 3).
– Check the region code (see “Region codes” on page 3).
Picture freezes
momentarily during
playback
– Check the disc for fingerprints/scratches and clean it with a soft cloth
wiping from center to edge.
This unit does not respond
to the remote control
– Aim the remote control directly at the remote control sensor on the
front panel.
– Reduce the distance of the remote control from this unit.
– Replace the batteries in the remote control.
– Reinsert the batteries with their polarities (+/– signs) as indicated.
Buttons do not work
– To completely reset this unit, unplug the AC cord from the AC outlet
for 5-10 seconds.
This unit does not respond
to some operating
commands during playback
– Operations may not be permitted by the disc. Refer to the
instructions of the disc jacket.
This unit cannot read CDs/
DVDs
– Use a commonly available CD/DVD lens cleaner to clean the lens
before sending this unit for repair.
Menu items cannot be
selected
– Press STOP (9) twice on the remote control before selecting Setup
Menu.
– Depending on the disc availability, some menu items cannot be
selected.
Unable to turn on or off a
progressive scan
– Check that the output of the video signal is switch to “YUV” (see
“Switching the YUV/RGB” on page 28).
No sound during DivX
movies playback
– The audio code may not be supported by this unit.
Problem
Solution
Analog: Sound that has not been turned into
numbers. Analog sound varies, while digital sound
has specific numerical values. These jacks send
audio through two channels, the left and right.
Aspect ratio: The ratio of vertical and
horizontal sizes of a displayed image. The
horizontal vs. vertical ratio of conventional TVs.
is 4:3, and that of widescreens is 16:9.
Audio output jacks: Jacks on the back of the
DVD System that send audio to another system
(TV, Stereo, etc.).
Bit rate: The amount of data used to hold a given
length of music; measured in kilobits per seconds,
or kbps. Or, the speed at which you record.
Generally, the higher the bit rate, or the higher the
recording speed, the better the sound quality.
However, higher bit rates use more space on a Disc.
Chapter: Sections of a picture or a music piece
on a DVD that are smaller than titles. A title is
composed of several chapters. Each chapter is
assigned a chapter number enabling you to locate
the chapter you want.
Component video output jacks: Jacks on the
back of the DVD System that send high-quality
video to a TV that has Component Video In jacks
(R/G/B, Y/Pb/Pr, etc.).
Disc menu: A screen display prepared for
allowing selection of images, sounds, subtitles,
multi-angles, etc. recorded on a DVD.
Digital: Sound that has been converted into
numerical values. Digital sound is available when
you use the digital audio output jacks. These
jacks send audio through multiple channels,
instead of just two channels as analog does.
DivX: DivX is a popular media technology
created by DivX, Inc. DivX media files contain
highly compressed video with high visual quality
that maintains a relatively small file size. DivX files
can also include advanced media features like
menus, subtitles, and alternate audio tracks. Many
DivX media files are available for download online,
and you can create your own using your personal
content and easy-to-use tools from DivX.com.
DivX Ultra: DivX Ultra Certified products
provide enhanced playback of advanced media
features supported by the DivX Media Format.
Key features include interactive video menus,
subtitles, alternate audio tracks, video tags and
chapter points.
DMF (DivX Media Format): The DivX Media
Format supports advanced media features,
adding controls for an interactive media
experience: interactive video menus, chapter
points, multi-language subtitles and alternate
audio tracks.
Dolby Digital: A surround sound system
developed by Dolby Laboratories containing up to
six channels of digital audio (front left and right,
surround left and right, center and subwoofer).
DTS: Digital Theatre Systems. This is a surround
sound system, but it is different from Dolby
Digital. The formats were developed by different
companies.
Interactive menu: Interactive video menus
offer unprecedented convenience and control so
you can quickly navigate between various scenes
or bonus features, and select from audio track
and subtitle options.
JPEG: A very common digital still picture
format. A still-picture data compression system
proposed by the Joint Photographic Expert
Group, which features small decrease in image
quality in spite of its high compression ratio.
MP3: A file format with a sound data
compression system. “MP3” is the abbreviation
of Motion Picture Experts Group 1 (or MPEG-1)
Audio Layer 3. By using MP3 format, one CD-R
or CD-RW can contain about 10 times as much
data volume as a regular CD can.
Parental control: A function of the DVD to
limit playback of the disc by the age of the users
according to the limitation level in each country.
The limitation varies from disc to disc; when it is
activated, playback will be prohibited if the
software’s level is higher than the user-set level.
PCM (Pulse Code Modulation): A system for
converting analog sound signal to digital signal for
later processing, with no data compression used
in conversion.
Playback control (PBC): Refers to the signal
recorded on video CDs or SVCDs for
controlling reproduction. By using menu screens
recorded on a Video CD or SVCD that supports
PBC, you can enjoy interactive-type software as
well as software having a search function.
Play list: A list of selected titles to be played back
in a specific order. This option is only available
with VR format and must be created beforehand.
Progressive scan: It displays all the horizontal
lines of a picture at one time, as a signal frame.
This system can convert the interlaced video
from DVD into progressive format for
connection to a progressive display. It
dramatically increases the vertical resolution.
Region code: A system for allowing discs to be
played back only in the region designated
beforehand. This unit will only play discs that
have compatible region codes. You can find the
region code of your unit by looking on the
product label. Some discs are compatible with
more than one region (or ALL regions).
S-video: Produces a clear picture by sending
separate signals for the luminance and the color.
You can use S-video only if your TV has S-video
input jack.
Surround: A system for creating realistic three
dimensional sound fields full of realism by
arranging multiple speakers around the listener.
Title: The longest section of a picture or music
feature on DVD, music, etc., in video software,
or the entire album in audio software. Each title
is assigned a title number enabling you to locate
the title you want.
Video output jack: Jack on the back of the
DVD System that sends video to a TV.
VR (Video Recording) format: A format
which enables you to create a DVD disc that can
be extensively re-edited.
Video CD & SVCD
CD
PICTURE CD
CD-R, CD-RW
DVD+R, DVD+RW, DVD+R DL
DVD-R, DVD-RW, DVD-R DL
VIDEO PERFORMANCE
Video (CVBS) Output
1 Vpp into 75 ohm
S-Video output
Y: 1 Vpp into 75 ohm
C: 0.3 Vpp into 75 ohm
RGB (SCART) output
0.7 Vpp into 75 ohm
Component video output
Y: 1 Vpp into 75 ohm
PB/CB PR/CR: 0.7 Vpp into
75 ohm
AUDIO FORMAT
Digital
Mpeg/Dolby Digital/Compressed Digital
DTS
PCM
16, 20, 24 bits
fs, 44.1, 48, 96 kHz
MP3 (ISO 9660)
96, 128, 256, 320 kbps
fs, 32, 44.1, 48 kHz
WMA
64 kbps–192 kbps
fs, 44.1, 48 kHz
Analog Sound
Stereo
AUDIO PERFORMANCE
DA Converter
24 bit
Signal-Noise (1 kHz)
105 dB
Dynamic range (1 kHz)
97 dB
DVD
fs 96 kHz
2 Hz-44 kHz
fs 48 kHz
2 Hz-22 kHz
SVCD
fs 48 kHz
2 Hz-22 kHz
fs 44.1 kHz
2 Hz-20 kHz
CD/VCD
fs 44.1 kHz
2 Hz-20 kHz
Distortion and Noise (1 kHz)
0.0035%
TV STANDARD (PAL/50 Hz) (NTSC/60 Hz)
Number of lines
625
525
Playback
Multistandard
(PAL/NTSC)
CONNECTIONS
SCART
Euroconnector
Y Output
Cinch (green)
Pb/Cb Output
Cinch (blue)
Pr/Cr Output
Cinch (red)
S-Video Output
Mini DIN, 4 pins
Video Output
Cinch
Audio Output (L+R)
Cinch
Digital Output
1 coaxial
IEC60958 for CDDA/LPCM
IEC61937 for MPEG 1/2, Dolby
Digital and DTS
CABINET
Dimensions (w x d x h)
435 x 310 x 51 mm
Weight
Approx. 2.6 Kg
POWER SUPPLY
Power inlet
230 V, 50 Hz
Power usage
Approx. 12 W
Power usage standby
< 1 W
Specifications are subject to change without
prior notice.
