Beta Three T4.6 Operation & User’s Manual

User Manual 4 x 6 line array full range column speaker

first before using this product. Pay attention to all warnings. Obey all operating instructions. Do not expose this product to rain or moisture. Do not block any ventilation openings. Install according to instructions . Do not install this product near any heat source, such as , heater, burner, or any other equipment with heat radiation . Only use spare parts by manufacturer. Pay attention to the safety symbol on the of the cover. manual Please keep this manual for future reference Clean this equipment with a dry cloth. manufacturer's a supplied the outside SAFETY INSTRUCTIONS PLEASE READ THIS MANUAL FIRST Thank you for a buying product. Read this manual first as it will help you operate the system properly. Please keep this manual for future reference. WARNING: This product must be installed by professionals. When using hanging brackets or rigging other than those supplied with the product, please ensure they comply with the local safety codes. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and servicing instructions. ATTENTION: Don't refit the system or spare parts without being authorized as this will . void the warranty WARNING: Don't (such as candles) the equipment. place naked flames close to

Installation Options TECHNICAL SPECIFICATIONS Specifications Frequency Response and Impedance Curve CONTENT Dimensions T series full range speaker line array column Product information updated without notification, please visit www.elderaudio.com for latest update. may be Push Terminals System Reference Diagram

T4.6 T4.6 3 Frequency response 90Hz-16KHz(-3dB). Sensitivity 92dB, Max SPL 115dB. Dispersion 180° x 25°. Rated power 180w, max power 720w. Plywood cabinet with durable textured paint finish. optional accessories.Suitable for many venues including inside and outside undercover environments. Can be installed alone or stacked in multiples using the Patents pending for central diffuser plate. A vertical line array of 6 x 4" full range transducers providing high fidelity sound. Designed for high speech intelligibility and natural sounding music. Main Features Adding the optional line transformer accessory makes the T4.6 line array speaker very versatile in 70/100v systems. To enhance the already great performance of the T4.6 you can use the EQ filters provided. Product Description A diffuser plate (patent pending) is fitted to the centre drivers to assist with the vertical pattern control. The T4.6 speaker can either be used in singles, multiples or stacked using the optional accessories in many indoor applications such as Houses of Worship, Shopping Malls, Transport Terminals, Theme Parks, Meeting Rooms, Schools, Small Auditoriums. When stacking the T4.6 end on end to create a taller line array the height of the line array must correspond to the ear height range of the listeners in both seated or standing positions. The T4.6 is manufactured from 15 mm plywood meeting a tensile strength of 3500N and is finished in either black or white using a very durable textured paint. The metal speaker grill is powder coated and passes all rust resistance tests. The T4.6 is shipped with a quick install U bracket. o three speakers in the T Series. This attractively designed, f 180W RMS, innovative speaker delivers high speech intelligibility and natural sounding music in a wide range of applications through its 4" full range drivers. A vertical line array of 6 drivers provides control over a horizontal and vertical pattern of 180° x 25° and reproduces the critical vocal range 90Hz-16kHz without requiring a processor. Applications churches/temples small auditoriums multifunction halls meeting rooms schools shopping malls transport terminals theme parks PRODUCT INTRODUCTION T series full range speaker line array column 4 x 6 line array full range column speaker Quick install U bracket included.

CHA : PIN1+ : SIGNAL GND CHA: PIN 1+ : PIN 1 - : PIN 2+ : PIN 2 - : CHA SIGNAL CHA GND CHB SIGNAL CHB GND CHB: PIN 1+ : PIN 1 - : PIN 2+ : PIN 2 - : CHB SIGNAL CHB GND PIN2+ : ! Serial no: Special design for big power！ RISK OF ELECTRIC SHOCK DO NOT OPEN MODE LF FILTER GROUND CLIPLIMITER INPUT PIN1: PIN2: PIN3: T4.6 1+ 1- INPUT OUTPUT INPUT MUTE DOWN UP DISPLAY RECALL /ENTER MUTE MUTE MUTE MUTE MUTE MUTE MUTE -6 -10 -20 -40 COMP OVER LOCK IN-1 IN-2 HF MF LF SLF LIMITER OVER -6 -10 -20 -40 SLF LF MF HF IN-2 IN-1 -40 -20 -10 OVER LIMITER IN-1 IN-2 HF MF LF SLF LIMITER OVER -6 -10 -20 -40 SLF LF MF HF IN-2 IN-1 -40 -20 -10 -6 OVER LIMITER IN-1 IN-2 HF MF LF SLF LIMITER OVER -6 -10 -20 -40 SLF LF MF HF IN-2 IN-1 -40 -20 -10 -6 OVER LIMITER -6 PROGRAM STATUS REMOTE/ID 2 1 C B A D E F POWER T4.6 1+ 2+ 1- 2- LOW LOW +- + + + + + - - - - - LOW LOW LOW LOW NL4 1- 1+ 1+ 2+ 1- 2- Speakon NL4 CONNECTION The T4.6 rear panel has two input connectors. You can choose to use either the 4 way push terminal connector or the NL4 speakon connector. The two connectors are paralleled for through connection. Push Terminals System Reference Diagram Processor (Optional EQ curves available on CD) Warning: Please make sure the speaker impedance and polarity match the amplifiers. T series full range speaker line array column

The T4.6 cabinet has 3 flying points, plus a stand mount adaptor to ensure fast and easy installation. To install stacked speakers there are an optional coupling brackets. 3.Stand mount adaptor 4.Tripod Installation Options Extension mount 2. Stand mount 3. Speaker coupling Warning: Always ensure the mounting accessories safety factor is not less than 5:1 or that it meets the local standards. T series full range speaker line array column 2.Speaker coupling brackets Ceiling mount Wall mount

Frequency response curve (without control) Impedance curve Sensitivity(1W@1m): Frequency Response(-3dB): Frequency Response(-10dB): 1 2 3 Product: Transducer: Power: Rated Impedance: Cabinet: Installation: Grill: Connector: Net Weight: Gross Weight: Optional Accessories: 90Hz-16kHz 92dB 8 ohms 180° x 25° 135x169x800mm (5.3x6.7x31.5in) 115dB/121dB( ) PEAK 80Hz-17kHz 9kg (19.8 lbs) 10kg (22.0 lbs) 240x205x900mm (9.4x8.1x35.4in) Passive Wooden Speaker 4 180W (RMS) 360W (MUSIC) 720W (PEAK) TECHNICAL SPECIFICATIONS Specifications Technical Specifications Speaker Testing Method 1. Frequency Response Use Pink noise to test the speaker in the anechoic chamber, adjust the level to make the speaker work at its rated impedance and set the output power at 1W, then test the frequency response 1m away from the speaker. 2. Sensitivity Use full range Pink noise which has been modified using an EQ curve to test the speaker in the anechoic chamber, increasing the signal to make the speaker work at its rated impedance and set the power output at 1W, then test the sensitivity 1m away from the speaker. 3. MAX.SPL Use full range Pink noise which has been modified using an EQ curve to test the speaker in the anechoic chamber , increase the signal to make the speaker work at its maximum power output level, then test the SPL1m away from the speaker. 4. Rated Power Use Pink noise to the IEC#268-5 standard to test the speaker, increase the signal for a continuous period of 100 hours, the rated power is the power whenthe speaker will show no visible or measurable damage. T series full range speaker line array column 6 x 4'' Full range transducers 15mm plywood construction White powder coated , 0.8mm steel mesh. Screw terminal and 1 NL4 Speakon Packing Dimension(WxDxH): Dispersion Angle（HxV）: Dimension(WxDxH): Maximum. SPL(1m): Mounting U bracket included and optional mounting points provided. Paint: White durable textured finish Coupling bracket, Stand adaptor, Tripod

T4.6 7 135mm [5.32in] 169mm [6.65in] 800mm [31.50in] 300mm [11.81in] 100 mm [3.94in] 52mm [2.05in] 93mm [3.66in] Top view Front view Side view Back view Bottom view Dimensions TECHNICAL SPECIFICATIONS T series full range speaker line array column