Emax E8 Quick Start Manual
Text of the manual
EMAX E8 Transmitter
E8 Transmitter is a new wireless controller released by EMAX. It has a built-in 2.4GHz dual-
band antenna and 2.4GHz RF module. The RF module supports 8 channels. The channel
range is configurable and compatible with most receivers on the market. It is equipped with
a wired trainer interface and simulation. The Mode of the device can swit
Product model: EMAX E8 Transmitter
Weight: 260g (without battery)
Size: L*W*H=150x140x45mm
Working voltage: 3.3V-4.2V
Channel: 8 channels, all channels can be configured
External interface: Micro USB interface, 3.5mm audio interface (wired trainer interface)
Transmitting module: built-in 2.4GHz dual-frequency FPC antenna, 2.4GHz RF
transmitt
2. Key operation instructions
Trim Buttons
When in left-hand mode (left-hand throttle):
1. L1+, L2- are the parameters "+, -" of the throttle [T]
2. L3-, L4+ are the parameters "-, +" of the direction [R]
3. R1+, R2- are the parameters "+, -" of the pitch [E]
4. R3 -, R4+ are the parameters "-, +" of the roll [A]
Mode switching
D8 mode: press the power switc
Note: It can be turned on and charged only when the battery polarity is correct, it will not
turn on or charge.
Instructor port and simulator operation
Trainer Port for Simulators
Insert one end of 3.5mm male to male into the trainer port (3.5mm audio interface), and
plug the other end into the simulator (sold separately) to output the corresponding channel
Left-handed mode: the left-hand joystick, up and down for throttle adjustment, left and
right for direction adjustment; the right joystick, up and down for pitch adjustment, and left
and right for roll adjustment.
Right-handed mode: the left joystick, up and down for pitch adjustment, left and right for
roll adjustment; the right joystick, up and down for th
