Getac F110 Operation & User’s Manual

respective companies. NOTE NOTE NOTE NOTE The information in this manual is subject to change without notice. For the latest version of the manual, please visit the Getac website at www.getac.com.

Table of Contents Table of Contents Table of Contents Chapter 1 Getting Started .......................................................................... 1 Getting the Tablet PC Running ................................................... 2 Unpacking ............................................................................... 2 Installing the SIM Card (Optional) and Battery Packs ............ 3 Connecting to AC Power ......................................................... 5 Using the Tether...................................................................... 6 Turning On and Off the Tablet PC .......................................... 7 Taking a Look at the Tablet PC ................................................... 8 Front Components .................................................................. 8 Rear Components ................................................................. 10 Left-Side Components .......................................................... 12 Top Components................................................................... 13 Bottom Components ............................................................. 14 Chapter 2 Operating Your Tablet PC....................................................... 15 Navigating on the Screen .......................................................... 16 Using the Touchscreen ......................................................... 16 Using the Dual Mode Display (Optional) ............................... 19 Using Network and Wireless Connections ................................ 20 Using the LAN (Optional) ...................................................... 20 Using the WLAN.................................................................... 21 Using the BT Feature ............................................................ 22 Using the WWAN Feature (Optional) .................................... 22 Using the Fingerprint Scanner (Optional).................................. 24 Chapter 3 Managing Power ...................................................................... 26 AC Adapter ................................................................................ 27 Battery Pack .............................................................................. 28 Charging the Battery Pac ...................................................... 28 Initializing the Battery Pack ................................................... 29 Checking the Battery Level ................................................... 29 Battery Low Signals and Actions .......................................... 30 Replacing the Battery Pack ................................................... 30 Power-Saving Tips .................................................................... 33

Anti-Explosion Protective Covers .............................................. 35 Chapter 5 Expanding Your Tablet PC ..................................................... 36 Connecting a USB Device ......................................................... 37 Connecting an Audio Device ..................................................... 38 Connecting an HDMI Display Monitor ....................................... 39 Connecting a Serial Device (Optional) ...................................... 40 Using Smart Cards (Optional) ................................................... 41 Using the NFC/RFID Reader (Optional) .................................... 42 Using MicroSD Cards (Optional) ............................................... 43 Replacing the SSD (Optional) ................................................... 44 Chapter 6 Using BIOS Setup .................................................................... 45 When and How to Use .............................................................. 46 Menu Descriptions ..................................................................... 47 Information Menu .................................................................. 47 Main Menu ............................................................................ 47 Advanced Menu .................................................................... 47 Security Menu ....................................................................... 49 Boot Menu ............................................................................. 50 Exit Menu .............................................................................. 51 Chapter 7 Using Getac Software ............................................................. 52 OSD Control Panel .................................................................... 53 G-Manager ................................................................................ 54 G-Camera (Optional) ................................................................. 55 Using the Barcode Reader (Optional) ....................................... 56 Chapter 8 Care and Maintenance ............................................................ 58 Protecting the Tablet PC ........................................................... 59 Using an Anti-Virus Strategy ................................................. 59 Using the Cable Lock ............................................................ 59 Taking Care of the Tablet PC .................................................... 60 Location Guidelines .............................................................. 60 General Guidelines ............................................................... 60 Cleaning Guidelines .............................................................. 61 Battery Pack Guidelines ........................................................ 61 Touchscreen Guidelines ....................................................... 62 When Traveling ......................................................................... 64 Chapter 9 Troubleshooting ...................................................................... 65 Preliminary Checklist ................................................................. 66 Solving Common Problems ....................................................... 67 Battery Problems................................................................... 67

Display Problems .................................................................. 68 Hardware Device Problems .................................................. 68 Power Management Problems .............................................. 69 Sensor Problems................................................................... 69 Software Problems ................................................................ 70 Sound Problems.................................................................... 70 Startup Problems .................................................................. 71 WLAN Problems.................................................................... 71 Other Problems ..................................................................... 73 Resetting the Tablet PC ............................................................ 74 System Recovery ...................................................................... 75 Using Windows RE ............................................................... 75 Using Recovery Partition ...................................................... 76 Using the Driver Disc (Optional) ................................................ 77 Appendix A Specifications .......................................................................... 78 Appendix B Regulatory Information ........................................................... 80 On the Use of the System ......................................................... 81 Class B Regulations .............................................................. 81 ANSI Warning ....................................................................... 82 Safety Notices ....................................................................... 83 On the Use of the RF Device .................................................... 86 USA and Canada Safety Requirements and Notices ........... 86 European Union CE Marking and Compliance Notices ........ 88 User Notification of Take-back Service ..................................... 91 ENERGY STAR 7.0 ................................................................... 92 Battery Recycling ...................................................................... 94 About Battery and External Enclosure Replacement ................ 95 Battery ................................................................................... 95 External Enclosure ................................................................ 95

Then, you will find a section briefly introducing the external components of the Tablet PC.

Tablet PC Tablet PC Tablet PC Running Running Running Running Unpacking Unpacking Unpacking Unpacking After unpacking the shipping carton, you should find these standard items:  F110_G5 Tablet PC  AC adapter  AC power cord  Battery pack x 2  Screen cleaning cloth  Stylus  Document(s)  Tether  Driver disc (optional) Inspect all the items. If any item is damage or missing, notify your dealer immediately.

SIM Card SIM Card SIM Card (Optional) and (Optional) and (Optional) and (Optional) and Battery Battery Battery Battery Pack Pack Pack Packssss 1. Locate the battery cover. Slide the two small locks outward to the unlocked position ( ) () and then release the latch ( ) () to open the battery cover. 2. Select models only: With the SIM card’s chip side facing up and the beveled corner pointing to the slot, insert the card all the way into the slot. NOTE:  To remove the SIM card, just push in the SIM card to pop-out and remove the card.  The slot still exists but cannot be used for models without the WWAN module.

insert its small tabs to the corresponding notches in the battery compartment. Then, lift the yellow protection sheet in the battery compartment and plug the battery connector. 4. Proceed with the other battery pack. 5. Hold the battery cover at an angle and insert the cover’s small tabs to the corresponding notches on the Tablet PC; then close the cover. Press the four small dots () so that the cover clicks into place. Engage the cover latch ( ) () and slide the two small locks inward to the locked position ( ) (). Battery 1 Battery 2

Connecting to AC Power Connecting to AC Power Connecting to AC Power CAUTION: Use only the AC adapter included with your Tablet PC. Using other AC adapters may damage the Tablet PC. NOTE:  The battery pack is shipped to you in power saving mode that protects it from charging/discharging. It will get out of the mode to be ready for use when you install the battery pack and connect AC power to the Tablet PC for the very first time.  When the AC adapter is connected, it also charges the battery pack. For information on using battery power, see Chapter 3. You must use AC power when starting up the Tablet PC for the very first time. 1. Plug the DC cord of the AC adapter to the power connector of the Tablet PC (). 2. Plug the female end of the AC power cord to the AC adapter and the male end to an electrical outlet (). 3. Power is being supplied from the electrical outlet to the AC adapter and onto your Tablet PC. Now, you are ready to turn on the Tablet PC.

Using the Tether Using the Tether Using the Tether A tether is provided for attaching the stylus to your Tablet PC. 1. Insert one of the tether’s loop ends through the hole of the stylus (as indicated by  below). Then, insert the other end through the first loop (as indicated by  below) and pull it tight. 2. Insert the other loop end to the tether hole on the Tablet PC (as indicated by  below). Then, insert the stylus end through the loop (as indicated by  below) and pull it tight.

Turning On and Off the Tablet PC Turning On and Off the Tablet PC Turning On and Off the Tablet PC Turning On Turning On Turning On Turning On Press the power button ( ). The Windows operating systemshould start. NOTE: Tapping the screen during startup may invoke a pre-boot menu (unless the default settings have been changed). If the menu appears, simply select Continue. Turning Off Turning Off Turning Off Turning Off When you finish a working session, you can stop the system by turning off the power or leaving it in Sleep or Hibernation mode: To... To... To... To... Do this... Do this... Do this... Do this... Power off (Shutdown) Tap  Power  Shut down. Sleep Press the power button.* -or- Tap  Power  Sleep. Hibernate By default, this option is not shown in the Start menu. If you want to use the feature, set up accordingly in Windows settings. * “Sleep” is the default setting of the power button. You may change what the power button does in Windows settings.

Taking a Look at the Tablet PC Taking a Look at the Tablet PC Taking a Look at the Tablet PC NOTE: Depending on the model you purchased, the appearance of your Tablet PC may not be exactly the same as those shown in this manual. CAUTION: You need to open the protective covers to access the connectors. When not using a connector, make sure to close the cover completely for water- and dust-proof integrity. (Engage the locking mechanism if existing.) Front Front Front Front Components Components Components Components Ref Ref Ref Ref Component Component Component Component Description Description Description Description  IR sensor IR sensor IR sensor IR sensor (optional) Detects the infrared energy of objects to form an image. The sensor flashes red light when in use. The near infrared (IR) imaging capability allows you to use Windows Hello face authentication.  Camera lens Camera lens Camera lens Camera lens (optional) Allows you to use the camera function. When the camera lens is in use, the indicator beside it lights up.  Light Light Light Light ssssensor ensor ensor ensor Senses the ambient light for automatic adjustments of the display backlight.

Blinks blue when the system is in Sleep mode. Battery Battery Battery Battery Charge Charge Charge Charge Lights amber when the battery is being charged. Lights green when battery charging is completed. Blinks green to indicate the battery’s built-in high temperature protection mechanism is activated. CAUTION: Do not remove the battery during this period. Blinks red (once per second) when the battery’s capacity is below 10%. Blinks red rapidly (once per 0.5 second) when there is a thermal protection problem. Ask for repair service in case this happens. Blinks amber when the battery charging is in an abnormal state. Replace the battery in case this happens. RF (Radio RF (Radio RF (Radio RF (Radio Frequency) Frequency) Frequency) Frequency) Lights blue when the RF radio of any RF feature (WLAN/BT/WWAN) is on.  Power Power Power Power bbbbutton utton utton utton Turns the power on or off. (The default “off” state is “Sleep mode.”)  Extra button The default function is Camera or Trigger depending on your model. Camera Starts the G-Camera application. Trigger Serves as the trigger button for the barcode reader if your model has the module.  P1 button Opens or closes the OSD Control Panel. When pressed longer: Serves as the Ctrl Ctrl Ctrl Ctrl+Alt Alt Alt Alt+Del Del Del Del keyboard keys.  Up/Down Up/Down Up/Down Up/Down bbbbutton utton utton utton increases the sound volume. decreases the sound volume.  Microphone Microphone Microphone Microphone Receives sound and voice to record voice.

Windows Logo Windows Logo Windows Logo Windows Logo bbbbutton utton utton utton Opens or closes the Start menu. NOTE:  The hardware buttons (except the power button) can be re-defined using G-Manager.  Some of the hardware buttons provide keyboard key functions on “POST/BIOS Setup/Non-ACPI” occasions. (See “Button Functions on Special Occasions” in Appendix A for information.) Rear Components Rear Components Rear Components Rear Components

 Stylus/ Stylus/ Stylus/ Stylus/ ddddigitizer pen igitizer pen igitizer pen igitizer pen Serves as the input device by tapping on the touchscreen to make selections and enter information. Ref Ref Ref Ref Component Component Component Component Description Description Description Description  Battery Battery Battery Battery ppppack ack ack ack ccccover over over over Inside are two battery packs. Inside is the SIM card slot (optional). NOTE: The SIM card slot still exists but cannot be used for models without the WWAN module.  Camera i Camera i Camera i Camera indicator ndicator ndicator ndicator (optional) Lights up when the camera lens beside it is in use.  Flash Flash Flash Flash (optional) Provides extra light when taking pictures.  Camera l Camera l Camera l Camera lens ens ens ens (optional) Allows you to use the camera function.  Speaker Speaker Speaker Speaker Sends out sound and voice from your Tablet PC.  RJ RJ RJ RJ----45 45 45 45 cccconnector onnector onnector onnector (optional) Connects the LAN cable.  Select models have one of the below components.

b Smart Smart Smart Smart ccccard ard ard ard rrrreader ader ader ader Accepts a smart card for additional security feature. c Fingerprint Fingerprint Fingerprint Fingerprint sssscanner canner canner canner Serves as the fingerprint verification, preventing unauthorized access to your Tablet PC. d Smart card Smart card Smart card Smart card reader and reader and reader and reader and removable SSD removable SSD removable SSD removable SSD module module module module Accepts a smart card for additional security feature. Contains the solid-state drive, which is the mass storage device of your Tablet PC. NOTE: The removable SSD is for the US and specific market sectors only. CAUTION: The SSD is not hot-swappable. Do not remove it without turning off the system first. Left Left Left Left----Side Components Side Components Side Components Side Components Ref Ref Ref Ref Component Component Component Component Description Description Description Description  Combo Combo Combo Combo aaaaudio udio udio udio cccconnector onnector onnector onnector Connects a set of headphones or external speakers with amplifier. Supports a headset microphone with 4-pole TRRS 3.5mm jack.  HDMI HDMI HDMI HDMI cccconnector onnector onnector onnector Connects a HDMI monitor or TV set.

USB 3.1 Gen 2 USB 3.1 Gen 2 USB 3.1 Gen 2 pppport ort ort ort Connects a USB device. Top Top Top Top Components Components Components Components Ref Ref Ref Ref Component Component Component Component Description Description Description Description  a None None None None Or can be one of the below components depending on your model: b Serial Serial Serial Serial pppport ort ort ort Connects a serial device. c MicroSD MicroSD MicroSD MicroSD ccccard ard ard ard sssslot lot lot lot Accepts a microSD card for removable storage media. d RJ-45 connector Connects the LAN cable. e USB 2.0 USB 2.0 USB 2.0 USB 2.0 pppport ort ort ort Connects a USB device. f Barcode reader lens Scans and reads barcodes.

 Antenna Antenna Antenna Antenna ppppass ass ass ass---- through through through through (optional) Connects to the docking station for using external GPS /WWAN/WLAN antenna.  Docking Docking Docking Docking cccconnector onnector onnector onnector Connects to the docking station (available as an option).  Kensington Kensington Kensington Kensington llllock ock ock ock Locks the Tablet PC to a stationary object for security. WLAN WWAN GPS

If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user, you may choose to read only the parts containing information unique to your Tablet PC. CAUTION:  Do not expose your skin to the Tablet PC when operating it in a very hot or cold environment.  The Tablet PC can get uncomfortably warm when you use it in high temperatures. As a safety precaution in such a circumstance, do not place the Tablet PC on your lap or touch it with your bare hands for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn.

Navigating on the Screen Navigating on the Screen Navigating on the Screen The screen of your Tablet PC is touch-sensitive. You can control the location of the cursor/pointer on the screen using the included stylus or your finger to communicate with the Tablet PC. CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the touchscreen. Doing so may damage the touchscreen surface. Use the included stylus or your finger. NOTE: An optical film has been attached to the screen before shipment. The film is a consumable, which will be worn out by possible scratches. You can purchase a new one when replacement is required. Using the Touchscreen Using the Touchscreen Using the Touchscreen Using the Touchscreen Your Tablet PC has a capacitive touchscreen. This type of touchscreen responds to objects that have conductive properties, such as fingertips and a capacitive-tipped stylus. You can change the touchscreen sensitivity settings to suit your scenario. Double-tap the Touch Screen Mode shortcut on Windows desktop to open the settings menu and select one of the options (as shown below). NOTE:  In high temperatures (above 60 oC / 140 °F), set the mode to Touch instead of Glove or Pen mode.  If liquid is spilled on the touchscreen causing a wet area, the area will stop responding to any inputs. For the area to function again, you must dry it. Select this if you are using the stylus. (You must use the one supplied with your model.) Select this if you are wearing gloves (referring to warm gloves or work gloves, not referring to touchscreen-capable gloves). Select this if you prefer using fingertips. Also, select this when raindrops are falling on the screen and should be rejected as input.

mouse functions. Term/ Term/ Term/ Term/Action Action Action Action EEEEquivalent quivalent quivalent quivalent Mouse Mouse Mouse Mouse Function Function Function Function Tap: Touch the screen once. Click/Point Double-tap: Touch the screen twice rapidly. Double-click Tap and hold: Tap and hold until a popup menu appears. Right-click Drag: Hold the stylus (or finger) on the screen and drag across the screen until reaching your destination. Drag Using Using Using Using Multi Multi Multi Multi----touch Gestures touch Gestures touch Gestures touch Gestures You can interact with your Tablet PC by placing two fingers on the screen. The movement of the fingers across the screen creates “gestures,” which send commands to the Tablet PC. Here are the multi-touch gestures that you can use: Gestures Gestures Gestures Gestures Action Action Action Actionssss ( = finger down; = finger up) ( = finger down; = finger up) ( = finger down; = finger up) ( = finger down; = finger up) Descriptions Descriptions Descriptions Descriptions Pan (Scroll) or Drag 1 or 2 fingers up or down. Use panning to see another part of a page that has scroll bars. Zoom (Pinch) Move two fingers apart/toward each other. Use zooming to make an item (a photo for example) on the screen larger or smaller. The gesture works in applications that support mouse wheel zooming.

( = finger down; = finger up) ( = finger down; = finger up) ( = finger down; = finger up) Descriptions Descriptions Descriptions Descriptions Rotate or Move two fingers in opposing directions. -or- Use one finger to pivot around another. Use rotating to move a picture or other item on the screen in a circular direction (clockwise or counter- clockwise). The gesture works in applications that support the specific gesture. Press and Tap Press on target and tap using a second finger. Use press and tap to access the shortcut menu. Two- finger Tap Tap two fingers at the same time (where the target is in the midpoint between the fingers). The function is defined by applications that support the specific gesture. Flicks Make quick drag gestures in the desired direction. Flick left or right to navigate back and forward in a browser and other applications. The gesture works in most applications that support back and forward.

Dual Mode Display (Optional) Dual Mode Display (Optional) Dual Mode Display (Optional) Dual mode display (if your model has the feature) incorporates both touchscreen and digitizer functions. The display is set to Touchscreen mode by default. Touchscreen mode provides all the functionalities that an ordinary touchscreen has. When the Tablet PC receives signals from the digitizer pen, the display automatically switches to Digitizer mode. You can move the cursor by bringing the digitizer pen close to the screen, without actually touching the screen’s surface.

and Wireless and Wireless and Wireless Connections Connections Connections Connections Using the LAN Using the LAN Using the LAN Using the LAN (Optional) (Optional) (Optional) (Optional) To connect the network cable to the LAN module (if your model has the feature, connect one end of the LAN cable to the RJ-45 connector on the Tablet PC and the other end to the network hub. The location of the connector depends on your model. or

WLAN WLAN WLAN The WLAN (Wireless Local Area Network) module supports IEEE 802.11ac, compatible with 802.11a/b/g/n. Turning O Turning O Turning O Turning Onnnn/O /O /O /Offffffff the WLAN the WLAN the WLAN the WLAN Radio Radio Radio Radio To turn on the WLAN radio: Tap  Settings  Network & Internet  Wi-Fi. Slide the Wi-Fi switch to the On position. To turn off the WLAN radio: You can turn off the WLAN radio the same way you turn it on. If you want to quickly turn off all wireless radio, simply switch on Airplane mode. Tap  Settings  Network & Internet  Airplane mode. Slide the Airplane mode switch to the On position. Connecting to a WLAN Network Connecting to a WLAN Network Connecting to a WLAN Network Connecting to a WLAN Network 1. Make sure that the WLAN function is enabled (as described above). 2. Tap the network icon in the lower right of the task bar. 3. In the list of available wireless networks, tap a network, and then tap Connect Connect Connect Connect. 4. Some networks require a network security key or passphrase. To connect to one of those networks, ask your network administrator or Internet service provider (ISP) for the security key or passphrase. For more information on setting a wireless network connection, refer to Windows online help.

BT Feature BT Feature BT Feature The BT technology allows short-range wireless communications between devices without requiring a cable connection. Data can be transmitted through walls, pockets and briefcases as long as two devices are within range. Turning Turning Turning Turning On/Off On/Off On/Off On/Off the the the the BT Radio BT Radio BT Radio BT Radio To turn on the BT radio: Tap  Settings  Devices  BT. Slide the BT switch to the On position. To turn off the BT radio: You can turn off the BT radio the same way you turn it on. If you want to quickly turn off all wireless radio, simply switch on Airplane mode. Tap  Settings  Network & Internet  Airplane mode. Slide the Airplane mode switch to the On position. Connecting to another BT Device Connecting to another BT Device Connecting to another BT Device Connecting to another BT Device 1. Make sure that the BT function is enabled (as described above). 2. Make sure that the target BT device is turned on, discoverable and within close range. (See the documentation that came with the BT device.) 3. Tap  Settings  Devices BT. 4. Select the device you want to connect from the search results. 5. Depending on the type of BT device that you want to connect to, you will need to enter the pertinent information. For detailed information on using the BT feature, see Windows’ online Help. Using the Using the Using the Using the WWAN Feature (Optional) WWAN Feature (Optional) WWAN Feature (Optional) WWAN Feature (Optional) A WWAN (Wireless Wide Area Network) uses mobile telecommunication cellular network technologies to transfer data. The WWAN module of your Tablet PC supports 3G and 4G LTE.

supported.  For instructions on installing the SIM card, see “Installing the SIM Card (Optional) and Battery Packs” in Chapter 1. Turning Turning Turning Turning On/Off On/Off On/Off On/Off the WWAN Radio the WWAN Radio the WWAN Radio the WWAN Radio To turn on the WWAN radio: Tap  Settings  Network & Internet  Airplane mode. Slide the Cellular switch to the On position. To turn off the WWAN radio: You can turn off the WWAN radio the same way you turn it on. If you want to quickly turn off all wireless radio, simply switch on Airplane mode. Tap  Settings  Network & Internet  Airplane mode. Slide the Airplane mode switch to the On position. SSSSeeeetting up a WWAN Connection tting up a WWAN Connection tting up a WWAN Connection tting up a WWAN Connection Tap  Settings  Network & Internet  Cellular. (For detailed information on cellular settings in Windows 10, see Microsoft Support website.)

Fingerprint Scanner Fingerprint Scanner Fingerprint Scanner (Optional) (Optional) (Optional) (Optional) WARNING:  We shall not be liable for any loss or damage whatsoever resulting from your use of the fingerprint scanner or neglect of fingerprint scanner use, or any data loss resulting from such developments as fingerprint authentication malfunctioning.  It is not recommended that you use the fingerprint scanner in a below- freezing temperature. The moisture on your finger can freeze to the scanner’s metal surface when you touch it, resulting in a failed operation. Besides, touching freezing metal with your finger can cause frostbite. The fingerprint scanner (if your model has the feature) provides a strong authentication mechanism based on fingerprint recognition. NOTE:  You can enroll a fingerprint only after creating a password for the Windows user account.  The fingerprint logon process can take a while. This is because the system has to check hardware devices and security configuration before initiating the fingerprint scanner.

1. Tap  Settings Accounts  Sign-in options. 2. On the right side under Fingerprint, tap Set up. 3. Follow the onscreen instructions to complete.

This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way.

AC adapter to another device can damage the adapter.  The AC power cord supplied with your Tablet PC is for use in the country where you purchased your Tablet PC. If you plan to go overseas with the Tablet PC, consult your dealer for the appropriate power cord.  When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the Tablet PC. A reverse procedure may damage the AC adapter or Tablet PC.  When unplugging the connector, always hold the plug head. Never pull on the cord. The AC adapter serves as a converter from AC (Alternating Current) to DC (Direct Current) power because your Tablet PC runs on DC power, but an electrical outlet usually provides AC power. It also charges the battery pack when connected to AC power. The adapter operates on any voltage in the range of 100~240 V AC.

source for the Tablet PC. It is rechargeable using the AC adapter. NOTE: Care and maintenance information for the battery is provided in the “Battery Pack Guidelines” section in Chapter 8. Charging Charging Charging Charging the Battery Pac the Battery Pac the Battery Pac the Battery Pac NOTE:  Charging will not start if the battery’s temperature is outside the allowed range, which is between 0 °C (32 °F) and 50 °C (122 °F). Once the battery’s temperature meets the requirements, charging automatically resumes.  During charging, do not disconnect the AC adapter before the battery has been fully charged; otherwise you will get a prematurely charged battery.  The battery has a high temperature protection mechanism which limits the maximum charge of the battery to 80% of its total capacity in the event of high temperature conditions. In such conditions, the battery will be regarded as fully charged at 80% capacity.  The battery level may automatically lessen due to the self-discharge process, even when the battery pack is fully charged. This happens no matter if the battery pack is installed in the Tablet PC. To charge the battery pack, connect the AC adapter to the Tablet PC and an electrical outlet. The Battery Charge Indicator ( ) on the Tablet PC glows amber to indicate that charging is in progress. You are advised to keep the Tablet PC power off while the battery is being charged. When the battery is fully charged, the Battery Charge Indicator glows green. The two battery packs are charged in sequence (Battery 1 first and then Battery 2). It takes approximately 5 hours to fully charge the two battery packs when the power is off and approximately 6 hours when the power is on (may need a longer charging time at lower temperatures). CAUTION: After the Tablet PC has been fully recharged, do not immediately disconnect and reconnect the AC adapter to charge it again. Doing so may damage the battery.

Initializing the Battery Pack Initializing the Battery Pack Initializing the Battery Pack You need to initialize a new battery pack before using it for the first time or when the actual operating time of a battery pack is much less than expected. Initializing is the process of fully charging, discharging, and then charging. It can take several hours. A software tool called “Gauge Reset” is provided for the purpose. Use the G-Manager program and select the Battery tab to find the tool. Checking the Battery Level Checking the Battery Level Checking the Battery Level Checking the Battery Level NOTE: Any battery level indication is an estimated result. The actual operating time can be different from the estimated time, depending on how you are using the Tablet PC. The operating time of a fully charged battery pack depends on how you are using the Tablet PC. When your applications often access peripherals, you will experience a shorter operating time. The two battery packs are discharged in parallel. By Operating System By Operating System By Operating System By Operating System You can check the approximate battery level using the battery meter function of the operating system. To read the battery level in Windows, tap the battery icon on the taskbar. By Gas Gauge By Gas Gauge By Gas Gauge By Gas Gauge On the exterior side of the battery pack is a gas gauge for displaying the estimated battery charge. When the battery pack is not installed in the Tablet PC and you want to know the battery charge, you can press the push-button to see the number of LEDs that light up. Each LED represents 20% charge. Push-button

Battery Low Signals and Actions Battery Low Signals and Actions Battery Low Signals and Actions The battery icon changes appearance to display the current state of the battery. Battery Battery Battery Battery Icon Icon Icon Icon Battery Level Battery Level Battery Level Battery Level Description Description Description Description Discharging The icon shows the charge remaining in 10-percent increments until the charge reaches the low-battery level. Low The battery charge has reached the low- battery level. Critically low The battery charge has reached the critical battery level. By default, Windows will display a notification and put your Tablet PC into Hibernation. When the battery is low, the Tablet PC’s Battery Charge Indicator ( ) also blinks red to alert you to take actions. Always respond to low-battery by connecting the AC adapter, placing your Tablet PC in Hibernation mode, or turning off the Tablet PC. Replacing the Battery Pack Replacing the Battery Pack Replacing the Battery Pack Replacing the Battery Pack CAUTION:  There is danger of explosion if the battery is incorrectly replaced. Replace the battery only with the Tablet PC manufacturer’s battery packs. Discard used batteries according to the dealer’s instructions.  Do not attempt to disassemble the battery pack. NOTE: You can hot swap one battery pack while the other one is supplying the power. To replace the battery pack, follow these steps: 1. Locate the battery cover. Slide the two small locks outward to the unlocked position ( ) () and then release the latch ( ) () to open the battery cover.

3. Fit another battery pack into place. Note the orientation of the battery pack. Hold the battery pack at an angle and insert its small tabs to the corresponding notches in the battery compartment. Then, lift the yellow protection sheet in the battery compartment and plug the battery connector. 4. Hold the battery cover at an angle and insert the cover’s small tabs to the corresponding notches on the Tablet PC; then close the cover. Press the four small dots () so that the cover clicks into place. Engage the cover latch ( ) () and slide the two small locks inward to the locked position ( ) ().

maximize the battery’s operating time by following these suggestions.  Do not disable Power Management.  Decrease the LCD brightness to the lowest comfortable level.  Shorten the length of time before Windows turn off the display.  When not using a connected device, disconnect it.  Turn off the wireless radio if you are not using the wireless module (such as WLAN, BT, or WWAN).  Turn off the Tablet PC when you are not using it.

Read this chapter if you have this model.

Explosion Protective Covers Explosion Protective Covers Explosion Protective Covers F110-Ex is suitable for use in potentially explosive atmospheres (zone 2 and zone 22 - non-conductive dust). All covers must be correctly installed in potentially explosive atmospheres. The battery cover must be secured to F110-Ex with three screws (as indicated below). You can only replace the battery outside the Ex-hazardous area. The bottom I/O cover must be secured to F110-Ex with two screws. While not in an Ex-hazardous area, you can remove this cover in order to access any connector behind it. I/O cover

Expanding Your Tablet PC Expanding Your Tablet PC Expanding Your Tablet PC You can expand the capabilities of your Tablet PC by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter.

Connecting a USB Device Connecting a USB Device Connecting a USB Device Your Tablet PC has a USB 3.1 Gen 2 port for connecting USB devices, such as a digital camera, scanner, printer, modem, and mouse. USB 3.1 Gen 2 supports a transfer rate up to 10 Gbit/s. Select models have a second USB port, which supports USB 2.0 (transfer rate is 480 MB/s). To unlock the left-side cover:

Audio Device Audio Device Audio Device For higher audio quality, you can send sound through an external audio device. The audio combo connector is the “4-pole TRRS 3.5mm” type (Apple iPhone Recessed) so you can connect a compatible headset microphone. SAFETY WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods. To unlock the left-side cover:

HDMI Display HDMI Display HDMI Display Monitor Monitor Monitor Monitor If you want the benefits of a larger display screen with higher resolution, you can connect an external display monitor to your Tablet PC. Your Tablet PC has an HDMI connector. HDMI (High-Definition Multimedia Interface) is an audio/video interface that transmits uncompressed digital data and therefore delivers true HD quality. To switch the display output, use Windows Control Panel or OSD Control Panel. To unlock the left-side cover:

Connecting a Serial Device Connecting a Serial Device Connecting a Serial Device (Optional) (Optional) (Optional) (Optional) If your model has the RS232 serial port, you can connect a serial device such as a serial mouse or serial communication device.

With an embedded microcontroller, smart cards have the unique ability to store large amounts of data, carry out their own on-card functions (e.g., encryption and mutual authentication), and interact intelligently with a smart card reader. To insert a smart card: 1. Locate the smart card reader. Open the cover. 2. With the embedded computer chip facing front and near the slot, slide the smart card into the slot. 3. Close the cover. To remove a smart card: 1. Make sure that the software is not accessing the smart card. 2. Open the cover. 3. Pull the card out of the slot. 4. Close the cover. Chip on the other side of the card.

NFC/RFID Reader NFC/RFID Reader NFC/RFID Reader (Optional) (Optional) (Optional) (Optional) The NFC/RFID reader can read data from NFC (Near Field Communication) and RFID (Radio Frequency Identification) tags. It supports ISO 14443 A/B, MIFARE, ISO 15693, and ISO 18000-3 standards. The NFC/RFID reader is enabled by default. To enable or disable the reader, run the BIOS Setup program and select Advanced  Device Configuration  RFID Card Reader. (See Chapter 6 for information on BIOS Setup.) For optimal results when reading an NFC/RFID tag, have the tag face the antenna in the same orientation as indicated by the icon on the exterior of the Tablet PC. NOTE:  When not using an NFC/RFID card, do not leave it within or near the antenna area.  For enhanced applications and customization of the module, contact your authorized Getac dealer.  The NFC reader requires specialized applications. For further information, ask your system administrator.  The tablet models with this option do not comply with ENERGY STAR®. RFID antenna

removable storage media. To insert a microSD card: 1. Locate the microSD card reader. Open the cover. 2. Align the card with its connector pointing to the slot and the connector side facing back. Slide the card into the slot until it reaches the end. 3. Windows will detect the card and assign it a drive name. 4. Close the cover. To remove a microSD card: 1. Open File Explorer File Explorer File Explorer File Explorer and tap Computer Computer Computer Computer. 2. Tap and hold the memory card icon and tap Eject Eject Eject Eject. 3. Open the cover. 4. Slightly push the card to release and then pull it out of the slot. 5. Close the cover.

placing the SSD placing the SSD placing the SSD (Optional) (Optional) (Optional) (Optional) 1. Disconnect the AC adapter and remove the battery packs. 2. To open the SSD cover, push the two locks inwards to the unlocked position (), slide the cover downwards (), and then lift the cover open. 3. Remove the screw and detach the SSD from the system board. 4. Plug the new SSD into place and secure it with the screw. 5. Close the SSD cover. Make sure the locks are engaged. 6. Replace the battery packs.

Using BIOS Setup Using BIOS Setup Using BIOS Setup BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand. The BIOS settings are needed by your computer to identify the types of installed devices and establish special features. This chapter tells you how to use the BIOS Setup Utility.

and How and How and How to Use to Use to Use to Use NOTE:  The actual setting items on your model may differ from those described in this chapter.  The availability of some setting items depends on the Windows version your computer is running. You need to run BIOS Setup Utility when:  You see an error message on the screen requesting you to run BIOS Setup Utility.  You want to restore the factory default BIOS settings.  You want to modify some specific settings according to the hardware.  You want to modify some specific settings to optimize the system performance. To run BIOS Setup Utility: Method 1: During system startup when the logo screen appears, tap the screen or press the Windows Logo button on your Tablet PC. In the pre-boot menu that appears, select Setup Utility. NOTE:  If you don’t want any accidental tapping to invoke the pre-boot menu, you can disable this method by setting the “Screen Tapping for Boot Options” item in the BIOS Setup Utility.  For Windows 10 models, the time period in which you can use the above method is extremely short. You can use the other method as described below. Method 2: Tap  Settings  Update & Security  Recovery. Under Advanced startup, tap Restart now. In the boot options menu, tap Troubleshoot  Advanced options  UEFI Firmware Settings. Tap Restart.

There are no user-definable items in this menu. NOTE: The “Asset Tag” information appears when you have entered the asset number for this Tablet PC using the asset management program. The program is provided in the Asset tag folder of the Driver disc. Main Menu Main Menu Main Menu Main Menu The Main menu contains the various system settings.  System Date System Date System Date System Date sets the system date.  System Time System Time System Time System Time sets the system time.  Boot Priority Boot Priority Boot Priority Boot Priority determines the first device that the system boots from. Select Legacy First or UEFI First according to your needs.  Le Le Le Legacy USB Support gacy USB Support gacy USB Support gacy USB Support enables or disables the system’s support for Legacy USB.  CSM Support enables or disables CSM (Compatibility Support Mode). You can set this item to Yes for backward compatibility with legacy BIOS services.  PXE Boot sets the PXE boot to UEFI or Legacy. PXE (Preboot eXecution Environment) is an environment to boot computers using a network interface independently of data storage devices or installed operating systems. Advanced Menu Advanced Menu Advanced Menu Advanced Menu The Advanced menu contains the advanced settings.  Wake Up Capability Wake Up Capability Wake Up Capability Wake Up Capability USB Wake Up From S3 allows a USB device activity to wake up the system from S3 (Sleep) state.  System Policy allows you to choose between Performance and Balance. If battery life is your first priority, select Balance. If you need system performance more than battery life, select Performance.

system.  Screen Tapping for Boot Options sets if tapping the screen during startup will invoke the boot options menu which provides access to some pre-boot operations. If disabled, tapping the screen during startup has no effect to the system’s booting process.  MAC Address Pass Through MAC Address Pass Through MAC Address Pass Through MAC Address Pass Through allows the system specific MAC address to pass through a connected dock, meaning the dock specific MAC address will be overridden by the system specific MAC address. This feature only works for UEFI PXE boot.  AAAActive ctive ctive ctive MMMManagement anagement anagement anagement TTTTechnology Suppor echnology Suppor echnology Suppor echnology Support (This item appears only on models supporting vPro.) Intel AMT Support enables or disables Intel® Active Management Technology BIOS extension execution. AMT allows the system administrator to access an AMT featured computer remotely. Intel Intel Intel Intel AMT AMT AMT AMT Setup Setup Setup Setup Prompt Prompt Prompt Prompt determines whether the prompt for entering Intel MEBx Setup appears or not during POST.  Virtualization Technology Virtualization Technology Virtualization Technology Virtualization Technology Setup Setup Setup Setup Intel(R) Virtualization Technology Intel(R) Virtualization Technology Intel(R) Virtualization Technology Intel(R) Virtualization Technology enables or disables Intel® VT (Intel Virtualization Technology) feature which provides hardware support for processor virtualization. When enabled, a VMM (Virtual Machine Monitor) can utilize the additional hardware virtualization capabilities provided by this technology. Intel(R) VT for Directed I/O (VT Intel(R) VT for Directed I/O (VT Intel(R) VT for Directed I/O (VT Intel(R) VT for Directed I/O (VT----d) d) d) d) enables or disables VT-d (Intel® Virtualization Technology for Directed I/O). When enabled, VT-d helps enhance Intel platforms for efficient virtualization of I/O devices. SW Guard Extensions (SGX) SW Guard Extensions (SGX) SW Guard Extensions (SGX) SW Guard Extensions (SGX) can be set to Disabled, Enabled, or Software Controlled. Intel® Software Guard Extensions (Intel® SGX) is an Intel technology for increasing the security of application code. It is used by application developers.  Graphics Setup Graphics Setup Graphics Setup Graphics Setup DVMT DVMT DVMT DVMT Pre Pre Pre Pre----Allocated Allocated Allocated Allocated sets the amount of pre-allocated (fixed) graphics memory for use by the internal graphics device.  Device Configuration enables or disables several hardware components. The items available for setting depend on your model.  Diagnostics and System Tester H20DST Tool performs system baseline check.

default state by using the “recovery partition” feature. Recovery partition is a portion of your hard disk drive that is set aside by the manufacturer to hold the original image of your system. WARNING:  Using this feature will reinstall Windows to your system and configure it to the system’s factory default settings. All data on the hard disk drive will be lost.  Make sure that power is not interrupted during the recovery process. An unsuccessful recovery may result in Windows startup problems.  Windows RE launches Windows Recovery Environment. Windows RE (Windows Recovery Environment) is a recovery environment that provides recovery, repair, and troubleshooting tools in Windows 10. Security Security Security Security Menu Menu Menu Menu The Security menu contains the security settings, which safeguard your system against unauthorized use. NOTE:  You can set the user password only when the supervisor password has been set.  If both the supervisor and user passwords are set, you can enter any of them for starting up the system and/or entering BIOS Setup. However, the user password only allows you to view/change the settings of certain items.  A password setting is applied right after it is confirmed. To cancel a password, leave the password empty by pressing the Enter key.  Set Set Set Set Supervisor/User Supervisor/User Supervisor/User Supervisor/User Password Password Password Password sets the supervisor/user password. You can set the supervisor/user password to be required for starting up the system and/or entering BIOS Setup.  Stro Stro Stro Strong Password ng Password ng Password ng Password enables or disables strong password. When enabled, the password you set must contain at least one upper-case letter, one lower-case letter, and one digit.  Password Configuration Password Configuration Password Configuration Password Configuration sets the minimum password length. Enter the number in the input field and select [Yes] [Yes] [Yes] [Yes]. The number should be between 4 and 64.  PPPPassword on Boot assword on Boot assword on Boot assword on Boot allows you to enable or disable the entering of password for booting up your system.

Secure Boot Configuration Secure Boot Configuration Secure Boot Configuration You can access this item only after setting the Supervisor Password Supervisor Password Supervisor Password Supervisor Password. Secure Boot enables or disables Secure Boot. Secure Boot is a feature that helps prevent unauthorized firmware, operating systems, or UEFI drivers from running at boot time. Delete all Security Boot Keys deletes all secure boot variables. Restore Factory Defaults resets secure boot variables to manufacturing defaults.  Set HDD Set HDD Set HDD Set HDD 0 0 0 0 User User User User Password Password Password Password sets the password for locking the Primary Master hard disk drive. After setting a password, the hard disk drive can only be unlocked by the password no matter where it is installed.  Security Freeze Lock Security Freeze Lock Security Freeze Lock Security Freeze Lock enables or disables the “Security Freeze Lock” function. This function is only applicable to SATA drives in AHCI mode. It prevents attacks on the SATA drive by freezing the security state of the drive at POST and also when the system resumes from S3.  TPM Setup Menu TPM Setup Menu TPM Setup Menu TPM Setup Menu TPM Support TPM Support TPM Support TPM Support enables or disables TPM (Trusted Platform Module) support. TPM (Trusted Platform Module) is a component on your computer’s mainboard that is specifically designed to enhance platform security by providing a protected space for key operations and other security critical tasks. Change Change Change Change TPM TPM TPM TPM Status Status Status Status allows you to select between No Operation and Clear.  Intel Trusted Execution Technology enables utilization of additional hardware capabilities provided by Intel® Trusted Execution Technology. Boot Menu Boot Menu Boot Menu Boot Menu The Boot menu sets the sequence of the devices to be searched for the operating system.  Boot Type Order determines the boot order. You can rearrange the order by dragging the boot device name up or down in the list.  Each boot device can be individually set to On or Off. If you want to exclude a boot device from the boot order, set the device to Off.

settings, you must save and exit so that the changes can take effect.  Exit Exit Exit Exit Saving Changes Saving Changes Saving Changes Saving Changes saves the changes you have made and exits BIOS Setup Utility.  Exit Discarding Changes Exit Discarding Changes Exit Discarding Changes Exit Discarding Changes exits BIOS Setup Utility without saving the changes you have made.  LLLLoad Setup oad Setup oad Setup oad Setup Default Default Default Defaultssss loads the factory default values for all the items.  Discard Changes Discard Changes Discard Changes Discard Changes restores the previous values for all the items.  Saves Changes Saves Changes Saves Changes Saves Changes saves the changes you have made.

Getac Software Getac Software Getac Software Getac software includes application programs for specific computer components and utility programs for overall management. This chapter briefly introduces the programs.

OSD Control Panel OSD Control Panel OSD Control Panel The OSD (On Screen Display) Control Panel provides a user-friendly interface for you to quickly activate or operate certain functions on your Tablet PC with a simple tap of the screen. To open the OSD Control Panel, start the program named OSDC. OSDC. OSDC. OSDC. The following screen appears. For detailed information on the program, see the program’s online help. Help

and features. The G-Manager home menu presents four categories. Select a category name to open it. For detailed information, see the program’s online help. Select About  About  Help.

embedded into JPEG files as EXIF 2.2 metadata. NOTE: G-Camera uses the standard location service of Windows. To start the G-Camera application, select  G-Camera. In the middle is the preview window with status display. At the two sides are various buttons. For detailed information on the program, see the program’s online help. Tap  Help.

Barcode Barcode Barcode Reader (Optional) Reader (Optional) Reader (Optional) Reader (Optional) NOTE: For enhanced applications and customization of the module, contact your authorized Getac dealer. If your model has the barcode reader module, you can read barcodes of the following types:  Code 39  Code 128  EAN/JAN/UPC  GS1 Databar  Interleaved 2 of 5  PDF417  QR Code  Data Matrix  OCR To read barcodes: 1. Start your processing software and open a new or existing file. Place the insertion point (or called cursor) where you want the data to be entered. 2. Press and hold the Trigger button of your Tablet PC while aiming the scan light at the barcode. The light projected from the lens consists of a center marker and four corner markers. Make sure the barcode is within the four corner markers. Adjust the lens’ distance from the barcode, shorter for a smaller barcode and farther for a larger one. Trigger button

results. 3. Upon a successful scan, the system beeps and the scan light turns off. The decoded barcode data will be entered into your processing software.

Maintenance Maintenance Maintenance Taking good care of your Tablet PC will ensure a trouble-free operation and reduce the risk of damage to your Tablet PC. This chapter gives you guidelines covering areas such as protecting, storing, cleaning, and traveling.

Protecting the Tablet PC Protecting the Tablet PC Protecting the Tablet PC To safeguard the integrity of your Tablet PC data as well as the Tablet PC itself, you can protect the Tablet PC in several ways as described in this section. Usi Usi Usi Using an Anti ng an Anti ng an Anti ng an Anti----Virus Strategy Virus Strategy Virus Strategy Virus Strategy You can install a virus-detecting program to monitor potential viruses that could damage your files. Using the Cable Lock Using the Cable Lock Using the Cable Lock Using the Cable Lock You can use a Kensington-type cable lock to protect your Tablet PC against theft. The cable lock is available in computer stores. To use the lock, loop the lock cable around a stationary object such as a table. Insert the lock to the Kensington lock hole and turn the key to secure the lock. Store the key in a safe place.

Taking Care of the Tablet PC Taking Care of the Tablet PC Taking Care of the Tablet PC Location Location Location Location Guidelines Guidelines Guidelines Guidelines  For optimal performance, use the Tablet PC where the recommended temperature is between 0 °C (32 °F) and 55 °C (131 °F). (Actual operating temperature depends on product specifications.)  Avoid placing the Tablet PC in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust. Using in extreme environments for long periods can result in product deterioration and a shortened product life.  Operating in an environment with metallic dust is not allowed.  Place the Tablet PC on a flat and steady surface. Do not stand the Tablet PC on its side or store it in an upside-down position. A strong impact by dropping or hitting may damage the Tablet PC.  Do not cover or block any ventilation openings on the Tablet PC. For example, do not place the Tablet PC on a bed, sofa, rug, or other similar surface. Otherwise, overheating may occur that results in damage to the Tablet PC.  As the Tablet PC can become very hot during operation, keep it away from objects that are vulnerable to heat.  Keep the Tablet PC at least 13 cm (5 inches) away from electrical appliances that can generate a strong magnetic field such as a TV, refrigerator, motor, or a large audio speaker.  Avoid moving the Tablet PC abruptly from a cold to a warm place. A temperature difference of more than 10 °C (18 °F) may cause condensation inside the unit, which may damage the storage media. General Guidelines General Guidelines General Guidelines General Guidelines  Do not place heavy objects on top of the Tablet PC as this may damage the display.  To avoid damaging the screen, do not touch it with any sharp object.  LCD image sticking occurs when a fixed pattern is displayed on the screen for a prolonged period of time. You can avoid the problem by limiting the amount

saver or turn off the display when it is not in use.  To maximize the life of the backlight in the display, allow the backlight to automatically turn off as a result of power management. Cleaning Guidelines Cleaning Guidelines Cleaning Guidelines Cleaning Guidelines  Never clean the Tablet PC with its power on.  Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the Tablet PC.  Gently wipe the display with a soft, lint-free cloth.  If water or liquid is split onto the Tablet PC, wipe it dry and clean when possible. Though your Tablet PC is water-proof, do not leave the Tablet PC wet when you can dry it.  If the Tablet PC gets wet where the temperature is 0° C (32° F) or below, freeze damage may occur. Make sure to dry the wet Tablet PC. Battery Pack Gu Battery Pack Gu Battery Pack Gu Battery Pack Guidelines idelines idelines idelines  Recharge the battery pack when it is nearly discharged. When recharging, make sure that the battery pack is fully charged. Doing so may avoid harm to the battery pack.  The battery pack is a consumable product and the following conditions will shorten its life: – when frequently charging the battery pack – when using, charging, or storing the battery in high temperature condition  To avoid hastening the deterioration of the battery pack thereby prolonging its useful life, minimize the number of times you charge it so as not to frequently increase its internal temperature.  Charge the battery pack between 10 °C ~ 30 °C (50 °F ~ 86 °F) temperature range. A higher environment temperature will cause the battery pack’s temperature to rise. Avoid charging the battery pack inside a closed vehicle and in hot weather condition. Also, charging will not start if the battery pack is not within the allowed temperature range.

day.  It is recommended that you charge the battery pack with the Tablet PC’s power off.  To maintain the battery pack’s operating efficiency, store it in a cool dark place removed from the Tablet PC and with 30 % ~ 40 % charge remaining.  Important guidelines when using the battery pack. When installing or removing the battery pack take note of the following: – avoid installing or removing the battery pack when the Tablet PC is in Sleep mode. Abruptly removing the battery pack may cause loss of data or the Tablet PC may become unstable. – avoid touching the battery pack terminals or damage may occur, thereby causing improper operation to it or the Tablet PC. The Tablet PC’s input voltage and surrounding temperature will directly affect the battery pack’s charge and discharge time: – charging time will be prolonged when the Tablet PC is turned on. To shorten the charging time, it is recommended that you place the Tablet PC in Sleep or Hibernation mode. – a low temperature will prolong the charging time as well as hasten the discharge time.  When using battery power in an extremely low temperature environment, you may experience shortened operating time and incorrect battery level reading. This phenomenon comes from the chemical characteristics of batteries. The appropriate operating temperature for the battery is -10 °C ~ 50 °C (14 °F ~ 122 °F).  Do not leave the battery pack in storage for more than six months without recharging it. Touchscreen Touchscreen Touchscreen Touchscreen Guidelines Guidelines Guidelines Guidelines  Use the finger or the included stylus on the display. Using a sharp or metallic object other than your finger or stylus may cause scratches and damage the display, thereby causing errors.  Use a soft cloth to remove dirt on the display. The touchscreen surface has a special protective coating that prevents dirt from sticking to it. Not using a soft cloth may cause damage to the special protective coating on the touchscreen surface.

with the power on may cause improper operation.  Do not use excessive force on the display. Avoid placing objects on top of the display as this may cause the glass to break thereby damaging the display.  In low and high temperatures (below 5 oC / 41 °F and above 60 oC / 140 °F), the touchscreen may have a slower response time or register the touch in the wrong location. It will go back to normal after returning to room temperature.  When there is noticeable discrepancy in the operation of the touchscreen function (wrong location on intended operation or improper display resolution), refer to the Windows online Help for instructions on recalibrating the touchscreen display.

into flash disks or other storage devices. As an added precaution, bring along an extra copy of your important data.  Make sure that the battery pack is fully charged.  Make sure that the Tablet PC is turned off.  Make sure that all the connector covers are closed completely to ensure the waterproof integrity.  Disconnect the AC adapter from the Tablet PC and take it with you. Use the AC adapter as the power source and as a battery-charger.  Hand-carry the Tablet PC. Do not check it in as luggage.  If you need to leave the Tablet PC in the car, put it in the trunk of the car to avoid exposing the Tablet PC to excessive heat.  When going through airport security, it is recommended that you send the Tablet PC and flash disks through the X-ray machine (the device you set your bags on). Avoid the magnetic detector (the device you walk through) or the magnetic wand (the handheld device used by security personnel).  If you plan to travel abroad with your Tablet PC, consult your dealer for the appropriate AC power cord for use in your country of destination.

encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common computer problems.

encounter any problem:  Try to isolate which part of the Tablet PC is causing the problem.  Make sure that you turn on all peripheral devices before turning on the Tablet PC.  If an external device has a problem, make sure that the cable connections are correct and secure.  Make sure that the configuration information is properly set in the BIOS Setup program.  Make sure that all the device drivers are correctly installed.  Make notes of your observations. Are there any messages on the screen? Do any indicators light? Do you hear any beeps? Detailed descriptions are useful to the service personnel when you need to consult one for assistance. If any problem persists after you follow the instructions in this chapter, contact an authorized dealer for help.

Solving Common Problems Solving Common Problems Solving Common Problems Battery Problems Battery Problems Battery Problems Battery Problems The battery does not charge (Battery Charge indicator does not light amber).  Make sure that the AC adapter is properly connected.  Make sure that the battery is not too hot or cold. Allow time for the battery pack to return to room temperature.  If the battery doesn't charge after it has been stored in very low temperatures, try disconnecting and reconnecting the AC adapter to solve the problem.  Make sure that the battery pack is installed correctly.  Make sure that the battery terminals are clean. The operating time of a fully charged battery becomes shorter.  If you often partially recharge and discharge, the battery might not be charged to its full potential. Initialize the battery to solve the problem. The battery operating time indicated by the battery meter does not match the actual operating time.  The actual operating time can be different from the estimated time, depending on how you are using the Tablet PC. If the actual operating time is much less than the estimated time, initialize the battery. BT Wireless Transmission Wireless Transmission Wireless Transmission Wireless Transmission Problems Problems Problems Problems I cannot connect to another device with BT wireless technology.  Make sure that both devices have activated BT feature.  Make sure that the distance between the two devices is within the limit and that there are no walls or other obstructions between the devices.  Make sure that the other device is not in “Hidden” mode.  Make sure that both devices are compatible.

 During operation, the screen may automatically turn off as a result of power management. Press any key to see if the screen comes back.  The brightness level might be too low. Increase the brightness. The characters on the screen are dim.  Adjust the brightness and/or contrast. The display brightness cannot be increased.  As a protection, the display brightness will be fixed at a low level when the surrounding temperature is too high or too low. It is not a malfunction in this situation. Bad dots appear on the display at all times.  A small number of missing, discolored, or bright dots on the screen are an intrinsic characteristic of TFT LCD technology. It is not regarded as a LCD defect. Clouding (or called “mura”) happens on the screen when you exert forces on the left or right side of the LCD frame.  This is a normal phenomenon, not a defect. Hardware Device Problems Hardware Device Problems Hardware Device Problems Hardware Device Problems The Tablet PC does not recognize a newly installed device.  The device may not be correctly configured in the BIOS Setup program. Run the BIOS Setup program to identify the new type.  Make sure if any device driver needs to be installed. (Refer to the documentation that came with the device.)  Make sure if the device needs any jumper or switch settings. (Refer to the documentation that came with the device.)  Check the cables or power cords for correct connections.

power is turned on. Power Management Problems Power Management Problems Power Management Problems Power Management Problems The Tablet PC does not enter Sleep or Hibernation mode automatically.  If you have a connection to another computer, the Tablet PC does not enter Sleep or Hibernation mode if the connection is actively in use.  Make sure that the Sleep or Hibernation time-out is enabled. The Tablet PC does not enter Sleep or Hibernation mode immediately.  If the Tablet PC is performing an operation, it normally waits for the operation to finish. The Tablet PC does not resume from Sleep or Hibernation mode.  The Tablet PC automatically enters Sleep or Hibernation mode when the battery pack is empty. Do any one of the following: − Connect the AC adapter to the Tablet PC. − Replace the empty battery pack with a fully charged one. Sensor Sensor Sensor Sensor Problems Problems Problems Problems The built-in digital compass doesn’t seem to be accurate.  Rotating the display can affect the accuracy of the digital compass. This is normal, not a malfunction. The sensors for the compass require periodic recalibration. Follow this method to recalibrate the sensors: 1. Make sure you are far away from any large metal objects or magnetic fields. 2. Start an application that utilizes the digital compass. 3. Hold the Tablet PC level with the horizon, with the LCD side facing up. 4. Rotate the Tablet PC 360° at least three times around each axis (X, Y, and Z) as shown below.

 Make sure that the software is correctly installed.  If an error message appears on the screen, consult the software program’s documentation for further information.  If you are sure the operation has stop, reset the Tablet PC. Sound Problems Sound Problems Sound Problems Sound Problems No sound is produced.  Make sure that the volume control is not set too low. Increase the volume.  Make sure that the sound is not muted.  Make sure that the Tablet PC is not in Sleep mode.

connected. Distorted sound is produced.  Make sure that the volume control is not set too high or too low. In most cases, a high setting can cause the audio electronics to distort the sound. Startup Problems Startup Problems Startup Problems Startup Problems When you turn on the Tablet PC, it does not respond and the Power Indicator does not light green.  If you are using an external AC power, make sure that the AC adapter is correctly and securely connected. If so, make sure that the electrical outlet works properly.  If you are using the battery power, make sure that the battery is not discharged.  When the ambient temperature is below -20 °C (-4 °F), the Tablet PC will start up only if both battery packs are installed. When you turn on the Tablet PC, it stops after POST.  Reset your Tablet PC. WLAN WLAN WLAN WLAN Problems Problems Problems Problems I cannot use the WLAN feature.  Make sure that the WLAN feature is turned on. Transmission quality is poor.  Your Tablet PC may be in an out-of-range situation. Move your Tablet PC closer to the Access Point or another WLAN device it is associated with.  Check if there is high interference around the environment and solve the problem as described next. Radio interference exists.  Move your Tablet PC away from the device causing the radio interference such as microwave oven and large metal objects.

by the affecting device.  Consult your dealer or an experienced radio technician for help. I cannot connect to another WLAN device.  Make sure that the WLAN feature is turned on.  Make sure that the SSID setting is the same for every WLAN device in the network.  Your Tablet PC is not recognizing changes. Restart the Tablet PC.  Make sure that the IP address or subnet mask setting is correct. I cannot communicate with the computer in the network when Infrastructure mode is configured.  Make sure that the Access Point your Tablet PC is associated with is powered on and all the LEDs are working properly.  If the operating radio channel is in poor quality, change the Access Point and all the wireless station(s) within the BSSID to another radio channel.  Your Tablet PC may be in an out-of-range situation. Move your Tablet PC closer to the Access Point it is associated with.  Make sure that your Tablet PC is configured with the same security option (encryption) to the Access Point.  Use the Web Manager/Telnet of the Access Point to check whether it is connected to the network.  Reconfigure and reset the Access Point. I cannot access the network.  Make sure that the network configuration is appropriate.  Make sure that the user name or password is correct.  You have moved out of range of the network.  Turn off power management.

 Correct the date and time via the operating system or BIOS Setup program.  After you have performed everything as described above and still have the incorrect date and time every time you turn on the Tablet PC, the RTC (Real-Time Clock) battery is at the end of its life. Call an authorized dealer to replace the RTC battery. GPS signals drop when they are not supposed to.  If your computer is connected to the docking station which has one or more USB 3.0 devices connected, the USB 3.0 device can interfere with the radio frequency, causing poor GPS signal reception. To solve the problem in this situation, run the BIOS Setup Utility, go to Advanced  Device Configuration  Docking USB Port Setting and change the setting from USB 3.0 to USB 2.0.

Tablet PC Tablet PC Tablet PC You may have to reset (reboot) your Tablet PC on some occasions when an error occurs and the program you are using hangs up. If you are sure the operation has stopped and you cannot use the “restart” function of the operating system, reset the Tablet PC. Reset the Tablet PC by any one of these methods:  Press and hold the P1 P1 P1 P1 button for more than 2 seconds. This opens the Ctrl Ctrl Ctrl Ctrl----Alt Alt Alt Alt----Del Del Del Del screen where you can select actions including Restart Restart Restart Restart.  If the above action does not work, press and hold the power button for more than 5 seconds to force the system to turn off. Then turn on the power again.

Windows RE Windows RE Windows RE Windows 10 has a recovery environment (Windows RE) that provides recovery, repair, and troubleshooting tools. The tools are referred to as Advanced Startup Options. You can access these options by selecting  Settings  Update & security. There are several choices:  System Restore This option allows you to restore Windows to an earlier point in time if you have created a restore point.  Recover from a drive If you have created a recovery drive on Windows 10, you can use the recovery drive to reinstall Windows.  Reset this PC This option allows you to reinstall Windows with or without keeping your files. See Microsoft website for more information. NOTE:  If you are in a situation where your computer won’t boot into Windows, you can access the Advanced Startup Options by running the BIOS Setup Utility and selecting Advanced  Windows RE.  System recovery for Windows 10 typically will take several hours to complete.

Recovery Partition Recovery Partition Recovery Partition When necessary, you can restore your Windows 10 system to the factory default state by using the “recovery partition” feature. Recovery partition is a portion of your hard disk drive that is set aside by the manufacturer to hold the original image of your system. WARNING:  Using this feature will reinstall Windows to your system and configure it to the system’s factory default settings. All data on the hard disk drive will be lost.  Make sure that power is not interrupted during the recovery process. An unsuccessful recovery may result in Windows startup problems. To restore your system to the factory default state: 4. Connect the AC adapter. 5. Run BIOS Setup Utility. Select Advanced  Recovery Partition. (See Chapter 6 for more information.) 6. Follow the onscreen instructions to complete the process.

Using the Driver Using the Driver Using the Driver Disc Disc Disc Disc (Optional) (Optional) (Optional) (Optional) NOTE: You can download the latest drivers and utilities from Getac website at http://www.getac.com  Support. The Driver disc contains drivers and utilities required for specific hardware in your Tablet PC. Since your Tablet PC comes with drivers and utilities pre-installed, you normally do not need to use the Driver disc. In case you want to manually install Windows, you will have to install the drivers and utilities one by one after installing Windows. To manually install drivers and utilities: 1. Start up the Tablet PC. 2. Prepare an external CD/DVD drive (with USB connection). Connect the drive to your Tablet PC. Wait for the Tablet PC to recognize the drive. 3. Insert the Driver disc. Make sure you use the disc that matches the Windows version of your Tablet PC. 4. The autorun program should automatically start. You will see the installation menu. Tap NEXT to go to the next page if there is more than one. 5. To install a driver or utility, just tap the particular button and follow the onscreen instructions to complete the installation.

Parts Parts Parts Parts Specifications Specifications Specifications Specifications CPU Whiskey Lake U Platform - Intel® Core™ i5-8265U, 1.6GHz up to 3.9GHz, 6M cache - Intel® Core™ i5-8365U, 1.6GHz up to 4.1GHz, 6M cache - Intel® Core™ i7-8565U, 1.8GHz up to 4.6GHz, 8M cache - Intel® Core™ i7-8665U, 1.9GHz up to 4.8GHz, 8M cache BIOS Insyde, Flash EEPROM, UEFI, supporting TPM, vPro, NIST, Absolute DDS, HDD Security Erasure, BIOS self-diagnostic, Device Guard & Credential Guard, MAC Pass through, ACPI, AMT12, and WMI RAM 8/16GB DDR4 SO-DIMM, 2400MHz Video Controller UMA - Intel® UHD Graphics 620 Display Panel 11.6-inch (16:9) TFT LCD, FHD 1920x1080, sunlight readable, 800 Nits maximum brightness, anti-glare Touchscreen Capacitive multi-touch screen - 10 point Audio Features Azalia, High Definition audio Speaker 1.5W x 1 Microphone Integrated microphone Hard disk drive 256GB /512GB/1TB SSD (Solid-State Drive) I/O ports Standard USB 3.1 Gen 2, combo audio (4-pole TRRS 3.5mm type), HDMI, Docking Optional One of the below on the top side: RS232 / RJ-45 / USB 2.0 / microSD / barcode reader One of the blow at the rear: Smart card reader / NFC/RFID reader + RJ-45 / fingerprint scanner LAN (option) 10/100/1000 Mbps Ethernet Wireless LAN + BT Intel® Wireless-AC 9260, 802.11 AC + BT 5.0 combo (vPro)

WWAN (option) 3G/4G LTE Camera (option) Front: FHD, IR sensor (option) Rear: 8M pixel, autofocus, LED, video capture Security Kensington lock TPM 2.0 Fingerprint scanner (optional) Powe AC adapter Universal 65 W; input: 100∼240 V, 50/60 Hz; output: 19V Battery pack x 2 Lithium-ion Prismatic type, 3-cell Dimension (LxW×D) 314 x 207 x 18mm (12.4 × 8.1 × 0.7 inch) Weight 1.39 kg (3 lb) Button Functions Button Functions Button Functions Button Functions on Special Occasions on Special Occasions on Special Occasions on Special Occasions On “POST/BIOS Setup/Non-ACPI” occasions, the five hardware buttons provide keyboard key functions as described below. Button Button Button Button Function Function Function Function Enter Esc Tab ↑↑↑↑ Up ↓↓↓↓ Down

PC. NOTE: Marking labels located on the exterior of your Tablet PC indicate the regulations that your model complies with. Please check the marking labels and refer to the corresponding statements in this appendix. Some notices apply to specific models only.

On the Use of the System On the Use of the System On the Use of the System Class B Regulations Class B Regulations Class B Regulations Class B Regulations USA USA USA USA Federal Communications Commission Radio Frequency Interference Statement NOTE: NOTE: NOTE: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Please note: Please note: Please note: Please note: The use of a non-shielded interface cable with this equipment is prohibited. Company name: Company name: Company name: Company name: Getac USA Address: Address: Address: Address: 15495 Sand Canyon Rd., Suite 350 Irvine, CA 92618 USA Phone: Phone: Phone: Phone: 949-681-2900

Radio Interference Regulations Class B Compliance Notice This Class B digital apparatus meets all requirements of the Canada Interference-Causing equipment regulations. Cet appareil numérique de Classe B respecte toutes les exigences du Règlement Canadien sur le matériel brouileur. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe B prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada. ANSI Warning ANSI Warning ANSI Warning ANSI Warning Equipment approved for ANSI/ISA 12.12.01, Nonincendive Electrical Equipment for use in Class 1, Division 2, Group A, B, C, and D. Maximum ambient temperature: 40°C  WARNING: To prevent ignition of a hazardous atmosphere, batteries must only be changed or charged in an area known to be non-hazardous.  EXPLOSION HARZARD WARNING: External connections/hubs through the connectors as mentioned (USB connector, Ethernet connector, video port, serial port, power supply connector, microphone jack, headphones jack, and buttons/switches) are not to be used in a hazardous location.  Power adapter shall not be used in hazardous locations.

About the Battery About the Battery About the Battery If the battery is mishandled, it may cause fire, smoke or an explosion and the battery’s functionality will be seriously damaged. The safety instructions listed below must be followed. Danger  Do not immerse the battery with liquid such as water, sea water or soda.  Do not charge/discharge or place the battery in high-temperature (more than 80 °C / 176 °F) locations, such as near a fire, heater, in a car in direct sunlight, etc.  Do not use unauthorized chargers.  Do not force a reverse-charge or a reverse-connection.  Do not connect the battery with AC plug (outlet) or car plugs.  Do not adapt the battery to unspecified applications.  Do not short circuit the battery.  Do not drop or subject the battery to impacts.  Do not penetrate with a nail or strike with a hammer.  Do not directly solder the battery.  Do not disassemble the battery. Warning  Keep the battery away from infants.  Stop using the battery if there are noticeable abnormalities such as abnormal smell, heat, deformities, or discoloration.  Stop charging if the charging process cannot be finished.  In case of a leaking battery, keep the battery away from flames and do not touch it.  Pack the battery tightly during transport.

might damage the protection circuit of the battery.  When children are using the system, parents or adults must ensure that they are using the system and battery correctly.  Keep the battery away from flammable materials during charging and discharging.  In case lead wires or metal objects come out from the battery, you must seal and insulate them completely. Caution Texts Concerning Lithium Batteries DANISH DANISH DANISH DANISH ADVARSEL! Lithiumbatteri – Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. NORWEGIAN NORWEGIAN NORWEGIAN NORWEGIAN ADVARSEL: Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner. SWEDISH SWEDISH SWEDISH SWEDISH VARNING: Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion. FINNISH FINNISH FINNISH FINNISH VAROITUS: Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan valmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti. ENGLISH ENGLISH ENGLISH ENGLISH CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer's instructions. DEUTSCH DEUTSCH DEUTSCH DEUTSCH VORSICHT: Explosionsgefahr bei unsachgemäßem Austausch der Batterie. Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleich-wertigen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers.

batterie. Remplacer uniquement avec une batterie du même type ou d’un type équivalent recommandé par le constructeur. Mettre au rebut les batteries usagées conformément aux instructions du fabricant. Attention (for USA Users) The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal. About the AC Adapter About the AC Adapter About the AC Adapter About the AC Adapter  Use only the AC adapter supplied with your computer. Use of another type of AC adapter will result in malfunction and/or danger.  Do not use the adapter in a high moisture environment. Never touch the adapter when your hands or feet are wet.  Allow adequate ventilation around the adapter when using it to operate the device or charge the battery. Do not cover the AC adapter with paper or other objects that will reduce cooling. Do not use the AC adapter while it is inside a carrying case.  Connect the adapter to a proper power source. The voltage requirements are found on the product case and/or packaging.  Do not use the adapter if the cord becomes damaged.  Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture.

On the Use of On the Use of On the Use of the the the the RF Device RF Device RF Device RF Device USA and Canada Safety Requirements and Notices USA and Canada Safety Requirements and Notices USA and Canada Safety Requirements and Notices USA and Canada Safety Requirements and Notices IIIIMPORTANT NOTE: MPORTANT NOTE: MPORTANT NOTE: MPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radio Frequency Interference Requirements and SAR Radio Frequency Interference Requirements and SAR Radio Frequency Interference Requirements and SAR Radio Frequency Interference Requirements and SAR This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. EMC Requirements This device uses, generates and radiates radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allowed by the Federal Communications Commission (FCC). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. The FCC limits are designed to provide reasonable protection against harmful interference when the equipment is installed and used in accordance with the instruction manual and operated in a commercial environment. However, there is no guarantee that interference will not occur in a particular commercial installation, or if operated in a residential area. If harmful interference with radio or television reception occurs when the device is turned on, the user must correct the situation at the user’s own expense. The user is encouraged to try one or more of the following corrective measures:

 Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. CAUTION: CAUTION: CAUTION: CAUTION: The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by the manufacturer could void the user’s authority to operate this device. Canada Radio Frequency Interference Requirements Canada Radio Frequency Interference Requirements Canada Radio Frequency Interference Requirements Canada Radio Frequency Interference Requirements To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit être utilisé à l'intérieur et devrait être placé loin des fenêtres afin de fournir un écran de blindage maximal. Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology.

reduce the potential for harmful interference to co-channel mobile satellite systems. L’appareil peut interrompre automatiquement la transmission en cas d’absence d’informations à transmettre ou de panne opérationnelle. Notez que ceci n’est pas destiné à interdire la transmission d’informations de contrôle ou de signalisation ou l’utilisation de codes répétitifs lorsque cela est requis par la technologie. Le dispositif utilisé dans la bande 5150-5250 MHz est réservé à une utilisation en intérieur afin de réduire le risque de brouillage préjudiciable aux systèmes mobiles par satellite dans le même canal. European Un European Un European Un European Union CE Marking and Compliance ion CE Marking and Compliance ion CE Marking and Compliance ion CE Marking and Compliance Notices Notices Notices Notices Statements of Compliance Statements of Compliance Statements of Compliance Statements of Compliance English English English English This product follows the provisions of the European Directive 2014/53/EU. Danish Danish Danish Danish Dette produkt er i overensstemmelse med det europæiske direktiv 2014/53/EU. Dutch Dutch Dutch Dutch Dit product is in navolging van de bepalingen van Europees Directief 2014/53/EU. Finnish Finnish Finnish Finnish Tämä tuote noudattaa EU-direktiivin 2014/53/EU määräyksiä. French French French French Ce produit est conforme aux exigences de la Directive Européenne 2014/53/EU. German German German German Dieses Produkt entspricht den Bestimmungen der Europäischen Richtlinie 2014/53/EU. Greek Greek Greek Greek To προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής Οδηγίας 2014/53/EU. Icelandic Icelandic Icelandic Icelandic Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer 2014/53/EU.

Norwegian Norwegian Norwegian Norwegian Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 2014/53/EU. Portuguese Portuguese Portuguese Portuguese Este produto cumpre com as normas da Diretiva Européia 2014/53/EU. Spanish Spanish Spanish Spanish Este producto cumple con las normas del Directivo Europeo 2014/53/EU. Swedish Swedish Swedish Swedish Denna produkt har tillverkats i enlighet med EG-direktiv 2014/53/EU. Notices Notices Notices Notices CE Max power: WLAN 2.4G: 16.9 dBm WLAN 5G: 17.67dBm BT: 9.9dBm RFID 13.56MHz: -11.39 dBuA/m@10m RFID 125KHz: -21.34dBuA/m@10m WWAN: 23.15dBm The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. AT BE BG HR CY CZ DK EE FI FR DE EL HU IE IT LV LT LU MT NL PL PT RO SK SI ES SE UK Waste Electrical and Electronic Equipment (WEEE) This symbol means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Proper recycling of your product will protect human health and the environment.

User Notification of Take User Notification of Take User Notification of Take----back Service back Service back Service back Service To Institutional (B2B) Users in United States: Getac believes in providing our institutional customers with easy-to-use solutions to recycle your Getac-brand products for free. Getac understands the institutional customers will likely be recycling multiple items at once and as such. Getac wants to make the recycling process for these larger shipments as streamlined as possible. Getac works with recycling vendors with the highest standards for protecting our environment, ensuring worker safety, and complying with global environmental laws. Our commitment to recycling our old equipment grows out of our work to protect the environment in many ways. Please see the product type below for information on Getac product, battery and packaging recycling in USA.  For Product Recycling: Your portable Getac products contain hazardous materials. While they pose no risk to you during normal use, they should never be disposed with other wastes. Getac provides a free take-back service for recycling your Getac products. Our electronics recycler will provide competitive bids for recycling non-Getac products as well.  For Battery Recycling: The batteries used to power your portable Getac products contain hazardous materials. While they pose no risk to you during normal use, they should never be disposed with other wastes. Getac provides a free take-back service for recycling your batteries from Getac products.  For Packaging Recycling: Getac has chosen the packaging materials used to transport our products carefully, to balance the requirements of shipping the product to you safely while minimizing the amount of material used. The materials used in our packaging are designed to be recycled locally. If you have the above for recycling, please visit our website https://us.getac.com/aboutgetac/environment.html

7.0 7.0 7.0 ENERGY STAR® is a government program that offers businesses and consumers energy-efficient solutions, making it easy to save money while protecting the environment for future generations. Please reference ENERGY STAR® related information from http://www.energystar.gov. As an ENERGY STAR® Partner, Getac Technology Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. An ENERGY STAR® qualified computer uses 70 % less electricity than computers without enabled power management features. Earning the Earning the Earning the Earning the EEEENERGY NERGY NERGY NERGY SSSSTAR TAR TAR TAR® ®® ®  When every home office is powered by equipment that has earned the ENERGY STAR®, the change will keep over 289 billion pounds of greenhouse gases out of the air.  If left inactive, ENERGY STAR® qualified computers enter a low-power mode and may use 15 watts or less. New chip technologies make power management features more reliable, dependable, and user-friendly than even just a few years ago.  Spending a large portion of time in low-power mode not only saves energy, but helps equipment run cooler and last longer.  Businesses that use ENERGY STAR® enabled office equipment may realize additional savings on air conditioning and maintenance.

(e.g., computer, monitor, printer, and fax) can save enough electricity to light an entire home for more than 4 years.  Power management (“sleep settings”) on computers and monitors can result in much savings annually. Remember, saving energy prevents pollution Remember, saving energy prevents pollution Remember, saving energy prevents pollution Remember, saving energy prevents pollution Because most computer equipment is left on 24 hours a day, power management features are important for saving energy and are an easy way to reduce air pollution. By using less energy, these products help lower consumers’ utility bills, and prevent greenhouse gas emissions. Getac Product Compliance Getac Product Compliance Getac Product Compliance Getac Product Compliance All Getac products with ENERGY STAR® logo comply with the ENERGY STAR® standard, and the power management feature is enabled by default. As recommended by the ENERGY STAR® program for optimal energy savings, the computer is automatically set to sleep after 15 minutes (in battery mode) and 30 minutes (in AC mode) of user inactivity. To wake up the computer, press the power button. If you want to configure power management settings such as inactivity time and ways to initiate/end Sleep mode, go to Power Options by right-clicking the battery icon on the Windows taskbar and then selecting Power Options in the pop-up menu. Please visit http://www.energystar.gov/powermanagement for detail information on power management and its benefits to the environment. NOTE: The tablet models with the RFID module (optional) do not comply with ENERGY STAR®.

To recycle the battery, please go to the RBRC Call2Recycle website or use the Call2Recycle Helpline at 800-822-8837. Call2Recycle® is a product stewardship program providing no-cost battery and cellphone recycling solutions across the U.S. and Canada. Operated by Call2Recycle, Inc., a 501(c)4 nonprofit public service organization, the program is funded by battery and product manufacturers committed to responsible recycling. See more at: http://www.call2recycle.org

bout Battery and External Enclosure bout Battery and External Enclosure bout Battery and External Enclosure Replacement Replacement Replacement Replacement BBBBattery attery attery attery The batteries of your product include two battery packs and a button cell. All batteries are available from Getac authorized service centers. The battery pack is user-replaceable. Replacement instructions can be found in Chapter 3. The button cell must be replaced by Getac authorized service centers. Visit the website at http://us.getac.com/support/support-select.html for authorized service center information. External Enclosure External Enclosure External Enclosure External Enclosure The external enclosure of the product can be removed using screwdrivers. The external enclosure can then be reused or refurbished. The enclosure consists of the back cover and the LCD frame. See below for information on how to remove the two parts. Remove the screws as indicated below. Open the back cover and LCD frame.