HAMPTON BAY CARROLTON II Use And Care Manual

electricity has been turned off at the circuit breaker or fuse box before beginning. WARNING: To reduce the risk of electrical shock or fire, do not use this fan with any solid-state fan speed control device. It will permanently damage the electronic circuitry. WARNING: To reduce the risk of personal injury, do not bend the blade arms (also referred to as flanges), when installing the brackets, balancing the blades or cleaning the fan. WARNING: Do not insert foreign objects in-between rotating fan blades. CAUTION: To reduce the risk of pe ...

10 Fastening the blade assemblies to the motor WARNING: To reduce the risk of personal injury, do not bend the blade arms (H) while installing, balancing the blades (G), or cleaning the fan. Do no insert foreign objects between rotating fan blades (G). □ Fasten the blade assemblies to the fan motor assembly (F) by lining up the slots of the motor (TT) with the tabs on the blade arms (UU). □ Tighten the two blade arm screws with lock washers (GG) already installed in the blade arms (H). □ Repeat this procedure for the remain ...

16 11 Attaching the light kit to the switch housing □ Remove the three light kit mounting screws (HH) from the 14W LED light kit (I) and keep these screws. □ While holding the 14W LED light kit (I) under your fan motor assembly (F), locate two single white and blue wires in the switch housing labeled "FOR LIGHT". Make the polarized plug connections: - White to white - Blue to black □ Carefully push all wires back into the switch housing. Install the light kit assembly (I) onto the switch housing with the three light kit mo ...

connections Assembly — Hanging the Fan (continued) 6 Blue Black Green White Black Ground conductor White AA NN If you feel you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician. Follow the steps below to connect the fan to your household wiring. Use the plastic wire nuts (AA) with your fan. Secure the plastic wire nuts (AA) with electrical tape. Make sure there are no loose strands or connections. □ Connect the ground conductor of the 120V supply (this may be a bare wire or a wire with green colored ...

Blades Blade arms 14 watt LED Light kit Glass shade Pre-Installation (continued) 6 Part Part A B C D E Quantity Quantity 1 1 1 1 1 Quantity Quantity 1 5 5 1 1 Description Description Mounting bracket (preassembled) Canopy ring Canopy Canopy bottom cover Hanger ball/downrod assembly F A B E H I G J C D ...

electricity has been turned off at the circuit breaker or fuse box before beginning. WARNING: To reduce the risk of electrical shock or fire, do not use this fan with any solid-state fan speed control device. It will permanently damage the electronic circuitry. WARNING: To reduce the risk of personal injury, do not bend the blade arms (also referred to as flanges), when installing the brackets, balancing the blades or cleaning the fan. WARNING: Do not insert foreign objects in-between rotating fan blades. CAUTION: To reduce the risk of pe ...

AM215ORB0002-A 1-855-HD-HAMPTON Questions, problems, missing parts? Before returning to the store, 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday call Hampton Bay Customer Service ...