ICP Electronics LCD-Kit01A Manual 

6.4” TFT Color 640x480 – 18bits Display (Ver. 2.0) ©Copyright 2000 by ICP Electronics Inc. All Rights Reserved. Manual first edition July 17, 2000. The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

1.1 Specifications.................................................................................. 3 1.2 What You Have............................................................................... 4 2. Installation..........................................................................5 2.1 LCD-Kit01A Connection Layout ...................................................... 6 2.2 Dimension Drawing......................................................................... 7 3. LCD-Kit01A Connectors ....................................................8 3.1 LCD-23 Connector .......................................................................... 8 3.2 AV-6721 Control Board................................................................. 11 Appendix ............................................................................. 11 Unpacking Precautions LCD-Kit01A 2 1 Introduction Welcome to the LCD-Kit01A 6.4” TFT color LCD. The LCD- Kit01A is an Amorphous Silicon TFT LCD panel with VGA input and OSD (On Screen Display) control. It is made for the system manufacturers, integrators, or VARs that want to provide all the performance, quality and reliability. The LCD-Kit01A is designed with 640 x 480 resolution and 18- bits display colors, wide view angle, High Contrast and Low Reflection to present a High Image Quality. With its compact size (6.4”), LCD-Kit01A is also the most suitable solution for OA Equipment, Display Terminals, and Industrial portable Workstation LCD monitor. The LCD-Kit01A comes with specifically designed mounting kit for fast installation. It is also Plug and Play, can be directly and easily connected to any VGA port.

z Single Supply Voltage : +12V z Outline Dimensions: 203.4mm x 131.0mm x 47.0mm z Panel Size : 6.4” (17cm) Diagonal z Active Area: 129.60mm (H) x 97.44mm (V) z Display Colors : 18-bits = 262.144 Colors z Number of Pixels : 640 (H) x 480 (V) z Pixel Format : 1 pixel = R + G + B dots z Pixel Arrangement : R, G, B Vertical Strip z Brightness : 300 cd/m2 z Pixel Pitch : 203μm (H) x 203μm (V) z Dot Pitch : 67.5μm (H) x 203μm (V) z Image Reversion : Up/Down and Left/Right z Viewing Direction : 6 o’clock z Viewing Angle : +/- 50o (H), -10o ~ +30o (V) z Contrast Ratio : > 100 : 1 z Surface Treatment : Hard Coating (or Anti-reflection) z Operating Temperature : 0~55oC z LCD MTBF : 50,000 hours z Backlight MTBF : 15,000 hours (min) z VGA Input z OSD built z RS232 I/F Touch Panel (option) LCD-Kit01A 4 1.2 What You Have In addition to this User's Manual, the LCD-Kit01A package includes the following items: z 6721 User’s Manual z LCD-Kit01A User’s Manual z Power adapter z AC power cord z VGA cable (1.8M) If any of these items is missing or damaged, contact the dealer from whom you purchased the product. Save the shipping materials and carton in case you want to ship or store the product in the future.

all connections description such as jumpers, connectors and switches setting. The layout of LCD-Kit01A connectors are shown on the next chapter. The reference manual of AV-6721 control board are separated on attached booklet. The Unpacking Precautions are shown on appendix that you should be careful with are described on the following page. AV6721 V G A IN P U T S E L E C T (O S D ) R E T U R N (O S D ) D O W N (O S D ) U P (O S D ) + 1 2 V D C IN P U T A26 LCD-Kit01A 6 2.1 LCD-Kit01A Connection Layout

LCD-Kit01A 8 3 LCD-Kit01A Connectors 3.1 LCD-23 Connection Board Layout JP1: 1 FPVEE 2 FPBACK 1 3 3 ENABKL 1-2 short : Backlight control using FPVEE 2-3 short : Backlight control using ENBKL ( default ) □ ○ ○ LCD-23

Signal Name Pin # Pin # Signal Name VPCLK 1 2 P33 P34 3 4 P31 P35 5 6 P32 P30 7 8 P28 P29 9 10 P27 P25 11 12 P26 P24 13 14 P21 P23 15 16 P22 P16 17 18 P20 P17 19 20 P18 P19 21 22 P14 P13 23 24 P12 P15 25 26 P11 P7 27 28 P10 PLCD 29 30 PLCD P9 31 32 P8 P4 33 34 P6 P3 35 36 P5 P2 37 38 P1 M 39 40 P0 SHFCLK 41 42 ENABKL FPVDD 43 44 FLM FPVEE 45 46 LP GND 47 48 GND +12V 49 50 +12V □ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 1 2 49 50 LCD-Kit01A 10 SHFCLK: Shift Clock. Pixel clock for flat panel data. FLM: First Line Marker.Flat Panel equivalent of VSYNC. LP: Latch Pulse(may also be called CL1). M: M signal for panel AC drive control (may also be called ACDCLK). ENABKL: power sequencing control for enabling the backlight FPVEE: Power sequencing control for panel bias voltage VEE. May also be configured as ENABKL CN2 : DF9-31P Panel interface Pin# 1 2 3 4 5 6 Signalname GND SHFCLK LP FLM GND P18 Pin# 7 8 9 10 11 12 Signalname P19 P20 P21 P22 P23 GND Pin# 13 14 15 16 17 18 Signalname P10 P11 P12 P13 P14 P15 Pin# 19 20 21 22 23 24 Signalname GND P2 P3 P4 P5 P6 Pin# 25 26 27 28 29 30 Signalname P7 GND M PLCD PLCD N.C Pin# 31 Signalname N.C. CN4 :Power Connector for backlight inverter 1 +12V 2 FPBACK 3 GND 1 4 4 VR □ ○ ○ ○

The AV-6721 Control Board is worked for VGA control; all detail as feature and connection information please refer to “AV-6721 User Manual”. Appendix Unpacking Precautions 9 Some components on LCD-Kit01A are very sensitive to static electric charges and can be damaged by a sudden rush of power. Ground yourself to remove any static charge before touching your LCD-Kit01A. You can do it by using a grounded wrist strap at all times or by frequently touching any conducting materials that is connected to the ground. 9 Do not touch the inner side of LCD panel and the connector/cable of fluorescent lamp/backlight when the power is on. The inverter supplies HIGH VOLTAGE to these parts (~ 690Vrms). 9 Disconnect power supply before handling and doing connection on LCD-Kit01A. Do not plug any connector or jumper while the power is on. It will cause fatal damage to your LCD panel. 9 Make sure that every connector is connected in correct direction. Any incorrect connection may cause smoke or burn of electrical parts or fatal damage of your LCD panel. 9 Be careful with the liquid crystal material. Do not swallow, inhale or have skin contact with this material in case that the LCD panel is broken and the liquid flow out. If you inhale the liquid material, rinse your mouth immediately with water then go to see a doctor. If you have skin contact with the liquid, wash it immediately with alcohol. Be careful, too, with the chips of glass if the panel is broken. 9 For outdoor usage, an ultra-violet ray protect-lens is recommended to apply onto LCD display. It will prevent your LCD from strong sun-light, scratches, dust and water invasion etc. which can cause damage to the LCD display.